Thermo Scientific Sorvall RC12BP+ Floor Centrifuge

Sorvall Legend T Benchtop Centrifuge with 4600rpm Rotor This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition with marks from use. Included are; 1x Sorvall RotorP/N: 75006445S/N: 002518 4x Sorvall swinging bucket Heraeus AdaptorsP/N: 75006449

Benchmark C5000-8-PT Sprint 8 Portable Clinical Centrifuge The Sprint 8 includes an eight position,  (more)fixed-angle rotor for the centrifugation of 10ml blood tubes (16 x 100mm), and 15ml conical tubes (17 x 120mm). Smaller blood tubes (12 x 75mm and 12 x 100mm) are also compatible with the use of optional adapters (C3100-ADP).With intuitive controls and a large LED display, virtually no programming or setup is required prior to starting a cycle. Simply use the up/down buttons to select the run time and press “START”. The safety lid-lock is engaged and the rotor quickly and smoothly accelerates to 3,400 rpm. Once the run time is completed (or the “STOP” button is pressed) the rotor comes to a complete stop and the lid lock is disengaged for the removal of samples.Ideal for Coag, PPP and urinalysis studies.INCLUDED: The Benchmark C5000-8-PT Sprint 8 Portable Clinical Centrifuge includes: - Portable centrifuge - Leveling kit - Car power adapter - One Year Manufacturer's Warranty

Max speed: 6000 rpm Max RCF: 2000 x g Max capacity: 6 x 1.5/2ml Dimensions: (WxHxD): 153 x 128 x 109 (more) mm Weight: 730g

rotor 4294 with buckets 4 inserts with 26 positions each 220-240 V 50-60Hz 7,500 rpm

Sartorius Certomat BS-1 Incubator Shaker This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order, but it is out of calibration by a few ˚C. It will require calibration upon installation. The service menu is password-protected. The shaker is in good working order. The system is in good cosmetic condition with minor marks.. This is the heating only model. It will not refrigerate.

Yamato WC-301UVB Auto Pure Benchtop Type 1 Water Purification System with UV Oxidation Lamp, 120V Co (more)nfiguration Benchtop Flow Rate (Typical) 2.5L/min (0.67 gpm) Resistivity 18.2 MΩ-cm Features - 2.5 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Intuitive, user-friendly touch screen interface - Large capacity, low cost consumable cartridges - Replacement cartridges are fresh and made in the USA with a 1 year shelf life - Compact design - Real time quality monitoring with leak detection - Quick change, cartridge – no tools needed - Premium quality ion exchange resin Compact design, benchtop or wall mount water purification system in 120V with UV oxidation lamp that produces Type 1 deionized water. Low cost of ownership. Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals, and ultraviolet light for bacteria sterilization and TOC reduction. As water exits the system, a final filter removes particulates and bacteria to reach Type 1 water specifications. INCLUDED: The Yamato WC-301UVB Auto Pure Benchtop Type 1 Water Purification System with UV Oxidation Lamp, 120V includes: - Drain fitting – ¼ MNPT x HB - 6 Feet of 3/8” OD Tube for Inlet - 6 Feet of 3/8” Hose for Drain Connection - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The VELP stirring rod with turbo propeller is ideal for medium / high viscosity ranges and medium /  (more)high speeds. Compatible with Velp Scientific ES, LS, DLS, LH, DLH, PW, OHS rod stirrers. The stirring rod generates an axial flow with suction of substances from top to bottom and low shear forces.

The HX7.4P2 C is a powder coated beam scale equipped with the PUE HX7 indicator. This 4-load-cell me (more)chanical design can be used in a wider range of applications when compared to the standard pallet solutions. Beam spacing allows to place any loads onto the scale using either a forklift or a transporter crane. Transport-supporting handles facilitate transfer of the device to the place of use. The indicator has been outfitted with a colour 7" graphic display and a diode bar graph which via red and green lights presents the current load mass referred to the scale range or preset minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Refrigerator capacity: 142 l Freezer capacity: 54 l Dimensions (H x W x D): 1360 x 550 x 629 mm