Thermo Scientific MySpin 6 Mini Centrifuge Zentrifuge 6 x 2ml 6.000 rpm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Sigma 3-16KL Centrifuge This item was removed from a university laboratory where it was surplus to r (more)equirements. The centrifuge is in very good used cosmetic condition, showing signs of general use. The rubber boot around the motor shaft is perished and torn due to age and wear, but this can be easily replaced and does not affect the unit's operation. Functionality: - Powers up and runs as intended. - Tested at -10ºC and 37ºC, with temperatures reached as expected. Included Accessories: - Bucket Adapters: - 4 x Sigma 17355 - 4 x Sigma 17356 - 4 x Sigma 17358 - 4 x Sigma 17359 - 4 x Sigma 17362 - 4 x Sigma 17377 - 4 x Sigma 17190 lids for the buckets Also included: - Instruction manual

Piramoon Technologies FiberLite F15-6x100 15,000rpm 24,700g Centrifuge Rotor This was removed from  (more)a university lab where it was surplus to requirements. The item is in very good cosmetic condition and also includes its original carry case and Carbon Fiber Rotor Care Kit for this specific model. Items features are as follows:15000rpm24,700 X G6x 100ml tube holdersQuick release autolock

Beckman Coulter Avanti J-E Centrifuge This was removed from a university lab where it was surplus to (more) requirements. The unit powers up but has several faults. The unit requires a new board, flash card and cooling system. It is in good cosmeti condition with minor marks. It is sold for spares/repairs.

Hermle Z206-A Centrifuge Max Capacity 6 x 50 ml Max. RPM/RCF 6,000 | 4,427 x g Running Time 59 min  (more)50s / 10s increments Five Year Warranty Five Year Warranty Five Year Warranty Five Year Warranty -->Features - Microprocessor control - Active imbalance detection and cut-off - One-hand closing - Emergency lid lock - Air cooling - autoclavable rotors - Diagnostic program - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion The Z206-A Compact Centrifuge is suitable for a variety of applications inside both the clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2ml to 50ml. A unique 6 x 5ml swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes. The advanced microprocessor controls feature an ergonomic turn knob that controls all settings (time, speed, accel/decel levels, etc.). The speed can be adjusted from 200 rpm up to a maximum speed of 6,000 rpm (corresponding to 4,427 xg) in the popular 50ml and 15ml rotors. The centrifuge lid features and automatic lid-lock that prevents it from being opened while the rotor is still in motion. In addition, a unique imbalance detection system is designed to automatically power down the motor in the event of improper loading of the rotor or any tube breakage. Compact, quiet, and versatile are just a few of the features found in the Z206-A centrifuge. Add to this, the proven safety features, and the result is the ideal centrifuge for a variety of clinical and molecular biology applications. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z206-A Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Pfeiffer Vacuum TPH062 has a wear free permanent magnetic bearing at the high vacuum side and an (more) oil lubricated ceramic bearing at the backing side. Applications: Freeze drying – packaging industry Degassing, casting, dry vacuum smelting (super-pure metals) Incandescent lamp manufacturing Electronic tubes Thin film deposition Space simulation Cryogenic research Electron microscopy Nuclear physics, Plasma physics, High energy physics Particle accelerators – Storage rings Inlet Flange: DN 63 ISO-KF Outlet Flange: DN 16 ISO-KF Final pressure: < 1 x 10-11 mbar Flow Rate (N2): 56 l/s Weight: 3.5 kg

Perkin Elmer Clarus 500 GC-MS Gas Chromatograph Mass Spectrometer System Lab This system was removed (more) from a university lab where it was surplus to requirements. The system has been professionally serviced and is in good working order. It is in excellent cosmetic condition with minor marks. The full-service report is available on request.

RADWAG pipettes are modern measuring equipment designed and manufactured in accordance with strict s (more)tandards concerning manufacturing cleanliness and biodegradability of the product. The pipettes represent a new line of the &#39;liquid handling&#39; product group, designed to quickly measure and transport liquids of small volume. They are characterized by high dosing accuracy and ergonomic, solid design. The pipette mechanism ensures exceptional accuracy and repeatability with reduced pressure on the pipetting button. All the pipettes are inspected for the conformity with the requirements of PN-EN ISO 8655 standard for dosing accuracy and repeatability. Each pipette is delivered with a test report featuring measurements results. The enclosed user manual contains a description of the pipetting techniques as well as verification and adjustment procedures that can be carried out by the user. Calibration certificates, issued by the accredited calibration laboratory are available on request. Features: Large and readable display that is fully visible during pipetting; Innovative soft grip preventing heat transfer to the pipette inside; Low pressure required to use the pipette reduces the risk of RSI; Simple click mechanism for changing the pipette volume; Option of autoclaving the whole pipette (disassembling not required). Recommended autoclaving process: 15 minutes at 121&deg;C temperature, 1.05 bar pressure; Tip ejector collar is made of PVDF which has a high chemical resistance (also at high temperatures) and low susceptibility to microorganisms expansion; Ultra UV resistance; Convenient button for changing the tips; Compatible with most of the tips available on the market.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R &ndash; resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR &ndash; infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C &ndash; capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Hermle 4 x pcr rotor The Hermle 4 x PCR rotor is designed to provide efficient and reliable sample p (more)rocessing in PCR applications. This rotor is compatible with the Hermle Z32-HK, Z327, and Z446 series centrifuges, making it an excellent addition to any laboratory using these centrifuges. The rotor has a maximum speed of 15,000 RPM and a maximum relative centrifugal force (RCF) of 15,343 x g, allowing for fast and efficient sample processing. The rotor has a 45° angle, which ensures the samples are held securely in place and can be easily accessed. This rotor can hold up to 4 x 8-Place PCR strips, providing a total capacity of 32 samples per run. This makes it ideal for laboratories that require a high throughput of samples in PCR applications. The rotor is made from high-quality materials, ensuring its durability and longevity even with repeated use. Its design allows for easy and quick loading and unloading of samples, increasing the efficiency of the centrifugation process. INCLUDED: The Hermle 4 x pcr rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty