Thermo Multifuge X3R Refrigerated Centrifuge Zentrifuge 4x750ml Megafuge 40R

This Sigma 3K18 Refrigerated Laboratory Centrifuge was removed from a university lab where it was su (more)rplus to requirements. The unit powers on and is in working order. There is no rotor, but we tested it without on a low speed. It is in reasonably good cosmetic condition with minor marks from use.

Beckman Coulter Type 70 TI Centrifuge Rotor 70,000 RPM This item was removed from a university lab w (more)here it was surplus to requirement. It is in good cosmetic condition but has not been tested. Specifications: - Type: 70 Ti - Maximum RPM: 70,000 - Capacity: Holds 8 x 25ml tubes - Serial Number: 00E 2294

Savant DNA Speed Vac DNA110-230 Concentrator Centrifuge This item was removed from a university lab  (more)where it was surplus to requirements. The concentrator centrifuge powers on and is in good cosmetic condition. Model: DNA110-230Serial No.: DNA110-6D1503

Benchmark C5000-8-PT Sprint 8 Portable Clinical Centrifuge The Sprint 8 includes an eight position,  (more)fixed-angle rotor for the centrifugation of 10ml blood tubes (16 x 100mm), and 15ml conical tubes (17 x 120mm). Smaller blood tubes (12 x 75mm and 12 x 100mm) are also compatible with the use of optional adapters (C3100-ADP).With intuitive controls and a large LED display, virtually no programming or setup is required prior to starting a cycle. Simply use the up/down buttons to select the run time and press “START”. The safety lid-lock is engaged and the rotor quickly and smoothly accelerates to 3,400 rpm. Once the run time is completed (or the “STOP” button is pressed) the rotor comes to a complete stop and the lid lock is disengaged for the removal of samples.Ideal for Coag, PPP and urinalysis studies.INCLUDED: The Benchmark C5000-8-PT Sprint 8 Portable Clinical Centrifuge includes: - Portable centrifuge - Leveling kit - Car power adapter - One Year Manufacturer's Warranty

Hermle Z216 M Centrifuge w/ COMBI-RotorFeatures - Brushless induction drive - Microprocessor control (more) - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ COMBI-Rotor includes: - COMBI-Rotor with Quick-Seal lid for 24 x 1.5/2.0ml and 4 x PCR strips - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

MARSHALL Select MS-CE4000 Benchtop Centrifuge, 4,000 RPM Maximum Speed 4,000 RPM Maximum RCF 2,250  (more)x g Maximum Capacity 6 x 50ml Features - Steel body construction with a plastic-sprayed surface for durability and aesthetic appeal - Low noise operation at less than 65 dB(A) ensures a quiet laboratory environment - Features a low temperature rise during use, preserving sample integrity - Equipped with a maintenance-free DC brushless motor for reliable and smooth operation - Microprocessor control with door cover protection enhances safety - Alarm monitoring function for real-time tracking of lock and motor status - User-friendly interface facilitates intuitive setup and operation - Real-time display of centrifugal force and operational parameters - Push-button programming and digital tube display for easy operation and monitoring - Supports various fixed-angle rotors to accommodate different testing needs - Compact dimensions make this centrifuge ideal for benchtop use The MARSHALL Select MS-CE4000 Benchtop Centrifuge is designed for optimal performance and durability, achieving a maximum speed of 4,000 RPM and an RCF of 2,250 x g. Its capacity to handle up to 6 x 50 ml tubes makes it suitable for a range of laboratory applications, from biochemistry to pharmacy. The centrifuge features a robust steel body with a plastic-sprayed surface, combining strength with an aesthetically pleasing appearance. It operates quietly with a noise level below 65 dB(A) and maintains a low temperature rise during operation, ensuring sample integrity. Equipped with a maintenance-free DC brushless motor and microprocessor control, the MS-CE4000 ensures smooth and reliable operation. The unit's safety is enhanced with door cover protection and an alarm monitoring system that keeps track of the lock and motor status. Its user-friendly interface includes push-button programming, a digital tube display for real-time parameter monitoring, and the ability to set and view centrifugal speed and time. The centrifuge is versatile, supporting various fixed-angle rotors to meet different experimental needs. With its compact dimensions (17.7 x 14.6 x 11 inches), this centrifuge is an excellent choice for laboratories seeking a reliable, multi-functional device. INCLUDED: The MARSHALL Select MS-CE4000 Benchtop Centrifuge, 4,000 RPM includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark BioMixer 3D Nutating Shaker The Benchmark BioMixer 3D multi-functional shakers provide a 3 (more)-dimensional “nutating” motion for thorough, foam-free mixing in blood and centrifuge tubes, as well as in a variety of flat vessels. The BioMixer comes standard with an autoclavable dimpled mat while optional flat mats are also available for mixing other vessel types. Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. Even the smallest single platform configuration has 24% more platform work surface than traditional nutating mixers. These mixers feature maintenance free, brushless motors capable of loads up to 2kg and are safe for use in cold rooms and incubators. INCLUDED: The Benchmark BioMixer 3D Nutating Shaker includes: - 12 x 12 inch Dimpled Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience MX08P100-A11B 8L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60HzFeatures -  (more)Large, universal icon and English display - On-screen prompts - Single-point calibration capability - Working temperatures from ambient +10° up to 150°C - DuraTop™ insulating, chemical-resistant top deck - Temperature stability of ±0.07°C - Controller displays internal bath temperature, set-point and more–all on one easy to read screen Three control buttons and plain-text on-screen prompts make the setup and operation of the MX Temperature Controller easy and straightforward. Redundant over-temperature protection, high and low temperature limits and alarms alert you instantly to conditions that fall outside normal operating parameters User-settable high-temperature safety provides over-temperature and low liquid level protection. Patented, integrated design protects pump and heater while simplifying cleaning and maintenance. PolyScience Circulating Bath with MX Temperature Controller. It is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Click Here to View Product Video INCLUDED: The Polyscience MX08P100-A11B 8L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.