Sigma 3-18K Refrigerated Centrifuge 18.000 rpm w/ fixed-angle Rotor 12154

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Star Lab C1000-STR-230EU Plate Centrifuge. The unit is in full working condit (more)ion and is ready for immidate realese. The plate centrifuge makes the safe and quick spin down of droplets and condensation very easy. Sealed plates are loaded vertically and surface tension keeps samples in place so there is no danger of spilling samples. The centrifuge accepts all plates up to 25 mm high. An optional adaptor is available for centrifuging 48-well PCR plates and 0.2 ml PCR tubes or strips. Less than quarter the size of most plate centrifuges Accommodates two plates Rapid start to stop Use before and after thermal cycling to increase PCR yield Accepts skirted, semi-skirted and non-skirted plates Easy cleaning and maintenance Rotor capacity: Two plates, any style, up to 25 mm high Power supply: 230 V, 50/60 Hz Permissible Relative Humidity: < 85% Dimensions (W × D × H) 190 mm × 210 mm × 193 mm

Maximum capacity: 4 x 750 ml Maximum permissible density: 1.2 kg/dm³ Speed range: 200 – 14000 rpm Ma (more)ximum acceleration: 20913 RCF Maximum kinetic energy: 27450 Nm Dimensions (WxDxH): 535 x 610 x 345 mm Weight: 68 kg Equipped with: 1x Eppendorf A-4-62 swing-out rotor (max 4000 rpm) 4x Eppendorf 03/03 bucket 4x Eppendorf 5810 blue insert (9 positions for 15 mL falcon tubes) 2x Eppendorf 5810 orange insert (4 positions for 50 mL falcon tubes)

This Beckman J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus  (more)to requirements. We have replaced the lid and repaired an area of cracked plastic underneath it. It is very stable. There are some cracks around the gas strut area. They do not appear to affect the operation of the unit. The unit is functional and has a comprehensive service history. The centrifuge holds a vacuum well and has been tested at: 5,000rpm10,000rpm15,000rpm20,000rpm (Max). It ran fine at all these speeds but the needle isn't totally in sync with the control knob. It has been tested at the following temperatures: 0ºC our thermometer read -15.8ºC20ºC our thermometer read 21.2ºC It appears to probably have a cooling issue. The compressor etc runs fine. It just appears to drop lower than it is set. When set to higher temps, it takes quite a while to heat up.

Hermle Z496-K High Volume Floor Standing Centrifuge (230V ONLY) The Z496-K centrifuges offer the hig (more)hest tube/bottle capacity in our line. Several rotors are available, including a popular 4 position swinging bucket rotor with a wide offering of accessories for the centrifugation of tubes, bottles, plates and blood bags. The high capacity rectangular buckets accept microplates directly or a variety of tube inserts for accomodating as many as 40 x 50ml conical or 96 x 15ml conical tubes per run. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving up to 99 saved programs, the easy to use front panel can adjust accel/decel rates, time, and convert operation between rpm and rcf. The powerful refrigeration system, with a range of -20° to 40° C, also features a precool function that ensures the temperature of the chamber is optimized for any application. A standard floor standing model is available (height: 38.6 in.) which includes a convenient lower drawer for the storage of frequently used rotors and accessories. In addition, a space saving “underbench” model (height: 27.5 in.) is available when under the counter storage is preferred. Both models are equipped with wheels for easy maneuverability around the laboratory. For all your high capacity, high volume needs, the Z496-K floor standing series is the perfect centrifuge. INCLUDED: The Hermle Z496-K High Volume Floor Standing Centrifuge (230V ONLY) includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Frontier™ 5000 Multi Series centrifuges are multifunctional, compact, low speed centrifuges and  (more)ideal for general laboratory applications. The included rotor standard options can process both round and conical bottom tubes (including common blood tubes) and can be easily retrofitted with accessories to process smaller tubes. Included in the FC5706-K model you will have the angular rotor with a maximum capacity of 12 x 15 ml. Features: Maximum relative centrifugal force (x g) at 4.427 g; maximum speed 6,000 rpm; tube diameter without adapter 18 mm / 15 ml; outer/inner radius 110 mm; angle 32°. HOW DOES A LABORATORY CENTRIFUGE WORK? A careful explanation with the Ohaus FC5706 model. Video presentation of the Frontier 5000 Multi centrifuges. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. COMFORT Designed for comfortable use, Frontier™ Multi centrifuges feature convenient control on an intuitive interface, allowing for responsive operation even when wearing gloves. VERSATILE Frontier™ Multi centrifuges can accommodate standard 50 and 15 mL tubes, including common blood tubes. When used with accessories, the rotors can be adapted for sizes up to 1.5ml. SAVE SPACE Frontier™ Multi centrifuges save valuable bench space by integrating all of their functionality into a small footprint. TECHNICAL FEATURES Speed ​​range: 200 rpm – 6.000 rpm. Maximum relative centrifugal force: 4.427 g. Program memories: 99. Acceleration gear: 10. Deceleration gear: 10. Lid lock: by motor. Noise level: ≤60 ± 2 dB (A). Rotor Compatibility: Angled 12 x 15ml; Angled 6 x 50ml; Oscillating rotor 6 x 5 ml. Rotor recognition method: manual. Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous. Safety certification: CE; FCC.

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W Dimensions (WxDxH): 210 x 245 x 65 mm Weight: 1.1 kg

Statebourne Crogenics Biostor 5 Liquid Nitrogen Dewar This was removed from a university lab where i (more)t was surplus to requirements. The unit is in good cosmetic condition but has not been tested. Internal Dimensions are: D 70cm x W 40cm. Item has 6 storage containers each with 9 draws.