Refrigerated centrifuge THERMO ELECTRON JOUAN GR4I With Rotor 11175338

This rotor was removed from a lab during a clearout. We have not tested the rotor so it will need to (more) be checked and tested prior to use in your centrifuge.

set of 4 JOUAN / THERMO M4 111744218 cups for centrifuge With 6 lids reference 25144058: 2 of the JO (more)UAN brand 4 of the THERMO brand To be used on rotor 11175338

Manufacturer: Sigma Model: 3-18K Universal Refrigerated Table Top Centrifuge 18.000 rpm w/ fixed-ang (more)le Rotor 12154 P/N: 10290 S/N: 113844 YoM: 2006 Description: The Sigma 3-18K is a universal table top centrifuge with built-in refrigeration system, suitable for low speeds, e.g. for cell sedimentation. It has a possibility of higher speed for faster separations and precooling the rotors durin standstill. Features: - Suitable for sedimentation of temperature-sensitive substances- Refrigerant CFC-free (R 134 a)- Display and control of temperature- Maintenance-free induction drive motor. A microcontroller controls speed, time, temperature and gravitational field- Magnetic rotor identification prevents the rotor from overspeeding- Stainless steel bowl- Imbalance switch- Motorized lid lock Specifications: 3-18K Universal Refrigerated Table Top Centrifuge:- Power consumption drive: 1010 W- Max. capacity: 4 x 250 ml- Max speed: 18.000 rpm- Min. speed: 100 rpm- Kinetic energy: 22997 Nm- Mains: 230 V / 50 Hz 1 Ph- Input Fuse: 10 ATFixed-angle rotor 12154:- Max. capacity: 24 x 2 ml- Max. speed: 15,300 rpm- Max. RCF: 21,460 x g- Angle: 45° Items delivered: - Sigma 3-18K Universal Refrigerated Table Top Centrifuge - Sigma fixed-angle rotor 12154 Condition: The Sigma 3-18K is in very good cosmetic as well as operating condition. It is 100% functional tested and ready to be used. Buy with confidence!

This Sorvall SLA-3000 Super-Lite Centrifuge Fixed Angle Rotor 6 x 500ml 1200rpm + Lid was removed fr (more)om a university lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used. Compatible with Thermo Scientific Sorval Evolution RC Series and RC-6 Series centrifuges including RC-5, RC-5B, RC-5B Plus, RC-5C Plus, and RC-26.

Eppendorf 5430R Refrigerated Centrifuge w/ Selectable Rotor The Eppendorf 5430R Refrigerated Centrif (more)uge w/ Selectable Rotor is a sophisticated and versatile laboratory device, tailored for a broad range of applications. It boasts a maximum speed of 17,500 RPM and a minimum speed of 100 RPM, coupled with an impressive maximum relative centrifugal force (RCF) of 30,130 x g. This centrifuge can accommodate various sample sizes with its maximum capacity of 48 x 1.5/2.0 ml or 6 x 50 ml. It features a broad temperature range from -11°C to +40°C, making it suitable for temperature-sensitive samples. The centrifuge is equipped with a timer that ranges from 30 seconds to 9:59 hours, including a continuous run option. Designed for user convenience, it includes a soft-touch, one-finger lid closure for ergonomic operation. The operation menu is menu-driven and multilingual, offering options in English, German, French, and Spanish, and is complemented by a large backlit display for ease of use. The device allows for quick access to routine programs with its five program keys and can save up to 50 user-defined programs. Enhanced safety features include automatic rotor recognition and imbalance detection. Additionally, the Eppendorf QuickLock System enables quick and easy opening and closing of the rotor lid, streamlining the workflow. INCLUDED: The Eppendorf 5430R Refrigerated Centrifuge w/ Selectable Rotor includes: - Selectable Rotor - Rotor Wrench - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5430R Refrigerated Centrifuge w/ Selectable Rotor SpecificationsMaximum Speed17,500 RPMMinimum Speed100 RPMMaximum RCF30,130 x gMaximum Capacity48 x 1.5/2.0 ml or 6 x 50 mlTemperature Range-11°C to +40°CTimer30 seconds to 9:59 hours, with continuous runNoise Level< 56 dB(A)Maximum Kinetic Energy10,000 JDimensions (W x D x H)14.9 x 25.2 x 11.7 in. (38 x 64 x 29.6 cm)Weight123.5 lb. (56 kg)Electrical Requirements120V, 50/60Hz, 6A, 475WDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

7x Boxes of Sarstedt Semi-Micro Cuvettes 67.740 3ml. 10 x 4 x 45 mm. These were removed from a unive (more)rsity lab. The boxes are new and sealed.

Dimensions (WxDxH): 2020 x 670 x 940 mm

Temperature range: Ambient +8°C to 130°C Temperature stability (at 37°C): ± 0.1°C Temperature unifor (more)mity within block (at 37°C): ± 0.1°C Temperature uniformity within block (at 130°C): ± 1°C Display resolution: 0.1°C Dimensions (WxDxH): 235 x 280 x 115 mm Weight (without blocks): 2.3 kg Equipped with: 2x Block SHT1/16 (Tube size: 16 mm, No of holes: 12, Hole size (ØxD): 16.6 x 47 mm

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

M1 Mass Standard - knob weights - set (1 mg - 10 kg), wooden box.

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.