Refrigerated Centrifuge BR4I

TOMY One Spin Mini Centrifuge New equipment in its original packaging Model/model number: One Spin - (more) mini laboratory centrifuge Maximum capacity: 1.5/2.0 ml microtubes x 4 Rotation speed: 4,000 rpm (±20%) *Fixed Centrifugal acceleration: 420-950 × g (1.5 ml) / 450-1000 × g (2.0 ml) Size/Weight: L105×D130×H96mm 0.38kg Single-phase power supply AC100-240V 50/60Hz 0.6A (dedicated power adapter)

Max. Speed: 13300 rpm Max. RCF: 17000 x g Includes: 24 x 1.5/2.0mL rotor with ClickSeal biocontainme (more)nt lid Run Time: 1 to 99 min. (1 min. increments); HOLD Dimensions (HxWxD): 225 x 243 x 352 mm Weight: 10.5 kg

Jouan M22i refrigerated centrifuge with Jouan 5000rpm rotor This item was removed from a university  (more)where it was surplus to requirement. It is in good cosmetic condition and powers on, however, we are unable to test it further as there's an error with the door lock sensor that prevents any use. Also, the screen visibility is poor, therefore it is listed as Spares/Repair. Includes: Jouan four bucket rotor SWM180.5Max 5000 rpmLoad charge 2.000kg

Cytocentrifuge based on Hettich Universal 320. Includes 1626 angle rotor for 6 vessels. Vmax: 4,000  (more)rpm; 2,039 g. Includes only 2 vessels with capacity for 4 cytochambers (2 per vessel). Cytochambers (not included) sample capacity from 1 to 8 mL. Maximum capacity 12 cytochambers. More vessels can be independently budgeted to complete maximum capacity. Not refrigerated. Analog rotary control and digital display (10 programs). Emergency stop. Acoustic signal. Includes manual. The Hettich cytology system makes it possible to produce a high-quality cytology preparation from a wide variety of body fluids. With large volume cytology chambers it is possible to process sample volumes of 8 ml or 2 x 8 ml. This makes cell concentration superfluous in many cases. On the other hand, when using the two-step procedure, no cells are lost during sedimentation because the cytology chamber is tightly attached to the slide. Drying is carried out in a second centrifugation step when the cells are already attached to the slide. It also allows the specific preparation of dry or wet preparations. Ideal for urinalysis, abdominal & spinal fluids, cysts, biopsies, ascites, Pap tests, CSF, viral infections, bronchial secretions, pleura, pericardium fluid, fine and needle aspiration among others.

Hermle SIEVA-3 Filtration Centrifuge The SIEVA-3 Filtration Centrifuge is the perfect centrifuge for (more) cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. Optional 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle SIEVA-3 Filtration Centrifuge includes: - Z600-500-P 500ml Centrifugal Basket, Perforated - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Electroporator Lonza 4D-Nucleofactor System. Formed by two modules: unit Core (control unit) and un (more)it-X unit-transfection). Unit X performs 16-to 32-transfections per minute. Includes instruction manual and original packaging. 2014. Specifications: 240 V; 50-60 Hz The Core Unit - Controlling the 4D-Nucleofactor™ System The X unit – Supporting Nucleofection™ of various cell numbers in different formats

Memmert ICP750 Refrigerated Forced Circulation Incubator 749L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 749 L (26.4 cu. ft.) Features - Temperature range from -12°C to +60°C with optimal performance between +16°C and +34°C - Large capacity of 749 L (26.4 cu. ft.) to accommodate high-volume storage - Equipped with an inner glass door for clear visibility while maintaining chamber integrity - Precise temperature control with 0.1°C setting accuracy and dual Pt100 sensors for mutual monitoring - Energy-saving CFC-free cooling and heating system (R134a refrigerant) with efficient automatic defrosting - TwinDISPLAY control system with dual high-definition TFT displays and multilingual settings - AutoSAFETY system with integrated over- and undertemperature protection to ensure safe operation - Constructed with a durable, corrosion-resistant stainless steel interior and zinc-plated steel housing The Memmert ICP750 Refrigerated Forced Circulation Incubator 749L, 115V offers advanced temperature control within a spacious 749-liter chamber, making it ideal for applications requiring precise cooling and heating cycles. With a temperature range of -12°C to +60°C and optimal performance at ambient temperatures between +16°C and +34°C, this unit accommodates a variety of temperature-sensitive materials. The incubator features an inner glass door, allowing clear visibility while ensuring the integrity of the chamber’s environment. Designed with dual Pt100 temperature sensors in a 4-wire circuit, it provides reliable monitoring and backup functions to maintain accuracy within 0.1°C. Equipped with Memmert’s TwinDISPLAY technology, the ICP750 offers easy adjustments through dual high-definition TFT displays and supports multiple languages. Its energy-efficient, CFC-free cooling and heating system with R134a refrigerant, coupled with an automatic defrost function, ensures optimal temperature management. Safety is prioritized with the integrated AutoSAFETY system, which offers over- and undertemperature protection and visual and acoustic alarms for maximum operational security. Constructed from durable stainless steel with a zinc-plated rear housing, the ICP750 embodies both functionality and resilience, making it a reliable choice for high-demand laboratory environments. INCLUDED: The Memmert ICP750 Refrigerated Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

F1 Mass Standard - knob weights without adjustment chamber. Nominal value - 1 g.

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Ohaus 30400189 Modular Heat Block, 6 x 28 mm Vials The Ohaus 30400189 Modular Heat Block, 6 x 28 mm  (more)Vials is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400189 Modular Heat Block, 6 x 28 mm Vials includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF IP65 FEM 1.02 ST.18S Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit m (more)ost laboratory liquid metering and dosing needs. The FEM 1.02 ST.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 FEM 1.02 ST.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty