Labnet Spectrafuge Mini Centrifuge Mikrozentrifuge 6x1.5/2ml 6000rpm C1301-230V

Maximum speed: 15000 rpm Maximum RCF: 21500 x g Maximum capacity: 24x 2 mL Speed control range: 300  (more)to 15,000 rpm (in increments of 100 rpm) Temperature range adjustment: -20ºC (displayed “Lo”) to 40ºC Timer: 1 to 99 minutes. (in increments of 1 minute) with a HOLD function (continuous operation) Acceleration/deceleration time variable: 2-stage variable acceleration, 2-stage braked deceleration plus free deceleration Memory-based programmed operation: SPEED/RCF, Time, TEMP, ACCEL, DECEL and stop melody Dimensions (WxDxH): 290 x 538 x 307 mm Weight: 40kg

Eppendorf Centrifuge Swing Buckets S-4x750 max 1000g 4900rpm These were removed from a university l (more)ab where they were surplus to requirements. 4x Eppendorf Centrifuge Swing Buckets S-4x750M/N: NL017Date: 03/13Max RPM: 4800 These are in good cosmetic condition on the outside, but are slightly corroded and pitted on the inside. They have not been tested.

Heraeus Biofuge Stratos refrigerated centrifuge. Adjustable speed from 300 to 23,300 rpm in incremen (more)ts of 10. 9-level acceleration/brake. Maximum capacity 4 x 180 ml. Automatic rotor recognition. Nine programs plus one pre-cooling program. Temperature range from -19 ºC to +40 ºC. Timer from 0 to 9 hrs 59 mins or continuous operation. Dimensions: 395*640*595 mm, 134 kg. User manual. Includes autoclavable Heraeus #3046 angular rotor with adapters for 6 Falcon-type 50 mL tubes and a maximum speed of 8,500 rpm. The Heraeus Biofuge Stratos is a versatile high-speed refrigerated tabletop centrifuge incorporating advanced drive technology. Stratos allows 9 different types of rotors: fixed angle, microliter, oscillating and microplate reaching speeds of up to 23,300 rpm. Acceleration and braking times are very short and the drive is silent. Sensitivity to imbalance is reduced to the point where tubes can be balanced by eye alone.

Hermle Z32-HK Refrigerated CentrifugeFeatures - Brushless induction drive - Microprocessor control - (more) Active imbalance detection and cut-off - Motor driven lid lock - Automatic rotor identifi cation system with over speed protection - Audible signal at the end of each run - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40C) - Autoclavable rotors - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10 increments - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Interested in rotors and/or adapters for this centrifuge?Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z32-HK Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z307 Centrifuge Microplate Bundle w/ 2 x 3 Microplate Rotor Speed Range 200 to 14,000 RPM (4, (more)500 RPM with included rotor) Maximum Capacity 4 x 200ml (2 x 3 Microplates with included rotor) Warranty 5 Year Manufacturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor-specific) - Imbalance tolerant drive - A large variety of rotors and accessories - Manufactured according to international safety regulations, i.e. IEC 61010 - Audible signal at the end of each run with several melody options - Rotor exchange is easy to handle - Noise level under 63 dBA at maximum speed - Improved ventilation system keeps samples cool - Stainless steel chamber The Hermle Z307 Centrifuge Microplate Bundle w/ 2 x 3 Microplate Rotor is a powerful and versatile laboratory tool that can handle a wide range of centrifugation tasks. With a speed range of 200 to 14,000 RPM (4,500 RPM with the included rotor) and a maximum RCF of 16,624 x g (2,716 x g with the included rotor), it can accommodate up to 2 x 3 microplates. The centrifuge also features a timer that can be set for up to 99 hours and 59 minutes, as well as the ability to program up to 99 different centrifugation programs. The Z307 compact universal laboratory centrifuge offers a wide range of applications covering clinical, research, and industrial laboratory use. The Z307 offers many accessories, including rotors for microplates and high speed fixed angle rotors for microtubes and centrifuge tubes up to 50 ml. The swing out rotors can load all common tubes such as blood collection tubes,15/50 ml tubes and even 200 ml tubes. This wide range of accessories makes the Z307 laboratory centrifuge indispensable in research laboratories and clinical hospital laboratories. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z307 Centrifuge Microplate Bundle w/ 2 x 3 Microplate Rotor includes: - Z307 Centrifuge - Z326-02MP 2 Place Swing Out Microplate Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

Polyscience P10N8A101B IP-100 Immersion Probe Cooler, 0.7 Rigid Cold Finger Probe, -100 to -60C, 120 (more)V, 60Hz3D Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P10N8A101B IP-100 Immersion Probe Cooler, -100°C to -60°C, 85W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus PX623 Pioneer Analytical Balance The Pioneer PX is a precision weighing tool tailored for lab (more)oratory, industrial, and educational settings. It supports diverse applications from basic weighing to density determination. The instrument features a backlit LCD complemented by a secondary dot matrix line for detailed data visualization. With integrated RS232 and USB interfaces, it ensures efficient data communication, including GLP/GMP outputs synchronized with a real-time clock. Constructed with a durable metal base and removable stainless steel pan, the PX incorporates adjustable features such as environmental filters, auto-tare, and customizable calibration points. Safety indicators and multilingual options further enhance its professional utility.INCLUDED: The Ohaus PX623 Pioneer Analytical Balance includes: - Power Cord - Two Year Manufacturer's Warranty

Motic BA210S Trinocular Microscope with LED Illumination This version of the Motic BA210S is a biolo (more)gical compound microscope with a trinocular head and ASC PL 4x, 10x, 40x S, and 100X S-Oil objectives designed for advanced biology students, teachers, doctors, and lab technicians. Every aspect of these microscopes contributes to making your daily work easier. The ergonomic shape of the stand and the comfortability of the different heads enables fatigue-free viewing for many hours.The BA210S is designed for educational and teaching environments from basic life sciences to medical applications. Contrast methods like Phase Contrast, Polarization, and Darkfield are easily performed by using optional accessories.INCLUDED: The Motic BA210S Trinocular Microscope with LED Illumination includes: - 10x Eye Piece - Objectives: ASC PL 4X, 10X, 40X S, 100X S-Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Gilson MyPIPETMAN Select P10mL, 1-10 mL PipetteFeatures - Designed to be ergonomic, safe, and reliab (more)le while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 1 to 10 mL - 3 Year Manufacturer's Warranty

Eppendorf 1 x 50ml Falcon Adapters, Cat. # 022637665 Eppendorf 1 x 50ml Adapters, Cat. # 022637665 f (more)or A-4-44 rotor. This is a 2 piece set, and are designed to be used with an Eppendorf 5804/R or 5810/R Centrifuge. INCLUDED: The Eppendorf 1 x 50ml Falcon Adapters, Cat. # 022637665 includes: - Full 6 Month Parts and Labor Warranty