Hitachi CT15RE Refrigerated Centrifuge

This Thermo Electron Corporation Jouan c4i Benchtop Centrifuge was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and is in full working order. The rotor is created for 4750rpm, but the unit's max speed with M4 buckets is 4000rpm. It is in good cosmetic condition with minor marks from use.

This Sigma 1-15K Refrigerated Benchtop Centrifuge was removed from a university lab where it was sur (more)plus to requirements. The unit has been recertified by a service engineer. It is in full working order. It has had a new gas strut fitted, but the lid can get stuck. Once it is opened it will repeatedly open, but when left for an amount of time it can get stuck again. It is in excellent cosmetic condition with some minor marks from use.

This Kendro Heraeus Multifuge 3 S-R Benchtop Centrifuge was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in good working order. (Digital thermometer not included). It is in good cosmetic condition but has some marks from age and use. Rotor - Heraeus 6445Max 4600rpm4 x Sorvalll Heraeus Buckets (75006441)4 x Green Adaptors (6496) Holds 5 x 50ml each4 x Sorvall Heraeus Bucket lids (75006421)

This Eppendorf 5810R Refrigerated Laboratory Centrifuge was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in good cosmetic condition. It is in good working order. Tested with the A-4-62 rotor fitted, it ran smoothly up to, 4000rpm. The centrifuge was last serviced by an engineer on 11.07.23 All additional items included: 1 x Eppendorf A-4-62 Swing Bucket Rotor4 x MTP swinging plate buckets 4 x 250 ml rectangular plate buckets8 x tube holders 1.2-5ml 25 wells2 x 15ml bucket adapters 9 wells

Beckman Avanti Model J-25 Refrigerated Centrifuge This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and has been tested with a JA20 rotor (Not included). It worked well up to the tested speed of the rotor's max of 20,000rpm. The refrigeration works well. It is in reasonably good cosmetic condition with some minor marks.

Benchmark C5000-8-PT Sprint 8 Portable Clinical Centrifuge The Sprint 8 includes an eight position,  (more)fixed-angle rotor for the centrifugation of 10ml blood tubes (16 x 100mm), and 15ml conical tubes (17 x 120mm). Smaller blood tubes (12 x 75mm and 12 x 100mm) are also compatible with the use of optional adapters (C3100-ADP).With intuitive controls and a large LED display, virtually no programming or setup is required prior to starting a cycle. Simply use the up/down buttons to select the run time and press “START”. The safety lid-lock is engaged and the rotor quickly and smoothly accelerates to 3,400 rpm. Once the run time is completed (or the “STOP” button is pressed) the rotor comes to a complete stop and the lid lock is disengaged for the removal of samples.Ideal for Coag, PPP and urinalysis studies.INCLUDED: The Benchmark C5000-8-PT Sprint 8 Portable Clinical Centrifuge includes: - Portable centrifuge - Leveling kit - Car power adapter - One Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Schutt Homgen Type 3.200 011 Homogeniser was removed from a university lab where it was surplus (more) to requirements. The unit powers up and the chuck turns but there is no tool attached. It is in good working order. It is in reasonable cosmetic condition but has some marks and rust from age.

Bunsen Vortex Shaker - AGT9 tube mixer. Speed range from 50 to 2600 rpm. Head stock for mixing test  (more)tubes of up to Ø 20 mm. Specifications: • It has two switchable working modes: - Continuous mode for uninterrupted mixing. - Manual mode in which mixing is activated automatically by slightpressure from the tube on the head stock. • Metal housing painted in epoxy. • Electronically regulated speed control. Stirring speed Variable between 50 and 2600 r.p.m Power 48 W Dimensions (W x H x D) 140 x 100 x 155 mm Weight 4 kg Eccentricity 6 mm

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Fully Antistatic Weighing Chamber Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. How will you get an even more accurate weighing result? This will be ensured by a special antistatic glass coating that compensates for electrostatic charges on the sample and laboratory accessories. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Eppendorf 1 x 80-120ml Adapters, Cat. # 022638424 The Eppendorf 1 x 80-120ml Adapters, Cat. # 022638 (more)424 are for use with the Eppendorf A-4-62 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 1 x 80-120ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 45mm x 138mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 1 x 80-120ml Adapters, Cat. # 022638424 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 1 x 80-120ml Adapters, Cat. # 022638424 SpecificationsBottom ShapeFlat with Rubber MatRotor CompatibilityEppendorf A-4-62 Swing Bucket Rotor