Hettich Rotofix 32A Centrifuge

Cepa Z-41 High Speed Centrifuge This was removed from a university lab where it was surplus to requi (more)rements. The unit powers up and is in working order. It runs on a timer delay so takes a few moments to start working. It is in good cosmetic condition.

Rousselet Robatel DRC 60 VX AY 1Sman Decanting Centrifuge This was removed from a laboratory where i (more)t was surplus to requirements. The system has not been tested as it has been disassembled to some degree.

Alresa Digicen centrifuge. Maximum speed adjustable up to 4,300 rpm in 10 rpm steps. Timer from 1 to (more) 99 min. Selectable braking. Includes 4 x 50 mL swing-out rotor. Manual not included. The Alresa Digicen centrifuge is a robust lab instrument that offers a wide range of functions for sample separation. With its modern and compact design, this centrifuge is ideal for use in research, clinical or industrial laboratories. In addition, it features a digital control panel that allows easy programming of centrifugation speed and time, making it a versatile and easy-to-use tool for any laboratory application.

Scilogex D2012 Personal Mini-Centrifuge The D2012 Micro-Centrifuge is a compact and powerful high-sp (more)eed centrifuge used in physical and chemistry analysis, biochemistry, cellular and molecular biology, clinical Labs and blood donation centers, and is ideal for high-end research applications such as: sedimentation of cells and viruses, separation of sub-cellular organelles, and isolation of macromolecules such as DNA, RNA, proteins or lipids. Supplied with a 12 position 1.5/2.0ml micro-tube rotor. Click Here to View Product Video

Hermle Z446 Centrifuge w/ Microplate Rotor The Z446 universal centrifuge series offers the highest c (more)apacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446 Centrifuge w/ Microplate Rotor includes: - Z446-750-AC 4 x 750ml Swing Out Rotor - Z446-750-MP Microplate Carriers (Set of 4) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z287-A Compact Universal Centrifuge The Z287-A exceeds the limitations set forth by tradition (more)al microcentrifuges which are restricted solely to fixed angle rotors for microtubes. Instead, this compact, next generation model features an expansive line of swing out and fixed angle rotors options that accept microplates and test-tubes up to 50ml. We’ve designed this centrifuge to be our most compact and economical. A true workhorse for any lab requiring a centrifuge that can accommodate many fields of research. Along with a broad range of available rotor options, the Z287-A introduces a convenient status indicator. Users can easily view the current state of the centrifuge from across the room. The LED illuminates to signify if the rotor is spinning, the run is completed or the centrifuge is idle in standby mode. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the EZ-Scroll touch wheel front panel can adjust accel/decel rates, and change the end of run alarm tone. Additionally this feature prevents debris buildup, leakage, and can be operated with gloves on. The Z287-A is a truly powerful and versatile centrifuge perfect for any research laboratory. INCLUDED: The Hermle Z287-A Compact Universal Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Heating thermostat from 35°C to 250°C for professional thermostats LAUDA PRO is a cutting-edge produ (more)ct line, designed to be the laboratory tools of the future. A significant innovation was the division between thermostats dedicated to internal applications and those dedicated to external applications. Then, the choice of offering products with tanks of a few liters allows the operator to quickly reach the desired temperature. New criteria have also been adopted for the design of the control panels. Two operational approaches are available, Basic, with OLED screen and essential but professional features, and Command Touch (named 'C'), the ultimate in the LAUDA experience, with touch display, graphic displays and numerous functions. In either case, the control panel can be removed from the thermostat for maximum operational flexibility and a noticeable decrease in instrument height. All thermostats are equipped with an Ethernet, USB interface and a Pt100 connection as standard. Cooling thermostats are also available with natural refrigerants. In addition, as standard, they are equipped with a cooling system that allows a lowering of the thermostat temperature with water. Notable features - Removable control panel for remote control - Stainless steel bathtubs (insulated with handles and drain tap) - 8-stage LAUDA Vario internal pump - Ethernet interface, USB and Pt100 connection as standard - Drain cock on the front of the device Accessories included Tank covers, pipe fittings with screw caps for the cooling coil Graph of heating performance of PRO P LAUDA thermostats.

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab This item was removed from  (more)a university where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).It has been professionally serviced, the report is available on request. It is in very good cosmetic condition internally and externally. This item includes the following: 3 x Shelves: 47 x 45 cm 1 x Humidity Water Tray: 44 x 25 x 7 cm

Ohaus Guardian 5000 e-G52HS10C-K1 Hotplate Stirrer, 120V Temperature Range Ambient +5°C to 500°C Spe (more)ed Range 50 rpm to 1,800 rpm Capacity 22 L Features - Heats and stirs up to 22 L for versatile lab applications - Temperature range up to 500°C with consistent heat control - 10 x 10 inch ceramic plate for even heat and stirring support - Speed range from 50 to 1,800 rpm for adaptable mixing - Digital display with high-contrast LCD for easy monitoring - Compatible with Ethernet, USB, and RS232 for data logging - Certified for safety with CE and TUV standards - Includes Pt1000 temperature probe and holder for precision The Ohaus Guardian 5000 e-G52HS10C-K1 Hotplate Stirrer, 120V, is engineered for high-performance heating and stirring, making it ideal for demanding lab environments. Its spacious 10 x 10-inch ceramic plate heats uniformly up to 500°C and can stir volumes up to 22 liters, offering flexibility for a wide range of applications. With a speed range of 50 to 1,800 rpm, this model supports both gentle and vigorous mixing, accommodating various sample needs. This hotplate stirrer features a high-contrast LCD display for clear visibility of settings, while Ethernet, USB, and RS232 connectivity enhance data logging and remote control. Safety-certified by CE and TUV, the Guardian 5000 includes a Pt1000 temperature probe and holder, ensuring precise temperature control. With a programmable timer that operates up to 99 hours and 59 minutes, this model is a reliable and versatile choice for laboratories prioritizing accuracy and adaptability. INCLUDED: The Ohaus Guardian 5000 e-G52HS10C-K1 Hotplate Stirrer, 120V includes: - 30500590 Temperature Probe - 30973298 Temperature Probe Holder - 1.5" (3.8 cm) PTFE Coated Stir Bar - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 1 kg), wooden box Number of pie (more)ces in the set: 13 weights 1 g i 2 g – solid masses without adjusting chamber

Hermle Z287-A Compact Universal Centrifuge The Z287-A exceeds the limitations set forth by tradition (more)al microcentrifuges which are restricted solely to fixed angle rotors for microtubes. Instead, this compact, next generation model features an expansive line of swing out and fixed angle rotors options that accept microplates and test-tubes up to 50ml. We’ve designed this centrifuge to be our most compact and economical. A true workhorse for any lab requiring a centrifuge that can accommodate many fields of research. Along with a broad range of available rotor options, the Z287-A introduces a convenient status indicator. Users can easily view the current state of the centrifuge from across the room. The LED illuminates to signify if the rotor is spinning, the run is completed or the centrifuge is idle in standby mode. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the EZ-Scroll touch wheel front panel can adjust accel/decel rates, and change the end of run alarm tone. Additionally this feature prevents debris buildup, leakage, and can be operated with gloves on. The Z287-A is a truly powerful and versatile centrifuge perfect for any research laboratory. INCLUDED: The Hermle Z287-A Compact Universal Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Benchmark IPS7101-150 HCS-150 High Capacity Magnetic Stirrer, 150L The Benchmark Industrial HCS Seri (more)es of high-capacity stirrers provide reliable performance and safe operation for high throughput lab use. These stirrers feature a durable, chemically resistant white ceramic top plate, which protects the internals of the stirrer from leaks and spills. The powerful motor drive system ensures efficient and thorough mixing in large vessels and viscous samples. Ideal for large-scale stirring applications, the HCS Series offers 50-liter and 150-liter maximum capacity models, as HCS-50L and HCS-150L respectively. Mixing speed can be viewed on the large digital display, and speed is adjustable from 50 rpm to 1500 rpm (HCS-50L) or 1200 rpm (HCS-150L). The built-in timer settings range from 1 second to 9 hours and include a continuous operation setting. INCLUDED: The Benchmark IPS7101-150 HCS-150 High Capacity Magnetic Stirrer, 150L includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty