Hettich Rotina 46 RS Refrigerated Centrifuge

This Thermo Scientific FiberLite F12-6x500 LEX Fixed Angle Centrifuge Rotor was removed from a unive (more)rsity lab where it was surplus to requirements. The unit is in good cosmetic condition with only minor marks from use, though it has not been tested and will need to be inspected by a qualified engineer before it is used again. Specs;12,000rpm24,471 x gHolds: 6 X 500ml tube

Ohaus FC5515 Frontier Micro Centrifuge w/ Selectable Rotor Speed Range 200 to 15,200 RPM Maximum Cap (more)acity 44 x 1.5/2.0ml or 12 x 5ml Warranty 2 Year Manufacturer's Features - Easy-to-turn rotary knob for parameter adjustments - Waterproof keypad provides protection that helps significantly increase the lifespan of the product - One-touch toggling between speed and g-force - LCD display which projects information in real-time - View and adjust user parameters from the main screen; no need to navigate through sub-screens - Powerful induction motor reaches speeds up to 15,200 RPM in less than 16 seconds - Maximum g-force of 21,953 RCF - 10 acceleration/deceleration settings - 99 memory sets for commonly used speed and time settings - Motorized lid-locking system prevents centrifuge from opening during operation - Rotor imbalance sensing system stops the motor should the rotors become imbalanced, protecting the user from spinning rotors Click Here to View Product Video The Ohaus FC5515 Frontier Micro Centrifuge provides high-speed operation for spin-down applications requiring a wide variety of tube volumes and capacities. With 10 acceleration/deceleration settings, multiple safety features, and an unmatched capacity, the FC5515 provides stable liquid separation for life science applications requiring high-speed operation. The intuitive control panel with rotary knob puts the centrifuge’s simple operations at your fingertips, including the ability to set and recall speed and g-force. A powerful brushless induction motor, 10 acceleration and deceleration settings, and memory for up to 99 commonly used parameters are a few of the FC5515’s features that propel high-performance. Among the FC5515’s safety attributes are a motorized lid locking system and a rotor imbalance sensor that stops the centrifuge if the rotors become imbalanced or sudden shock occurs, protecting the operator from by the high-speed spinning rotors. Compatible with seven different rotors, more than any centrifuge in its class, the highly versatile FC5515 can be used for various applications of different volumes. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5515 Frontier Micro Centrifuge w/ Selectable Rotor includes: - FC5515 Frontier Micro Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

TOMY One Spin Mini Centrifuge New equipment in its original packaging Model/model number: One Spin - (more) mini laboratory centrifuge Maximum capacity: 1.5/2.0 ml microtubes x 4 Rotation speed: 4,000 rpm (±20%) *Fixed Centrifugal acceleration: 420-950 × g (1.5 ml) / 450-1000 × g (2.0 ml) Size/Weight: L105×D130×H96mm 0.38kg Single-phase power supply AC100-240V 50/60Hz 0.6A (dedicated power adapter)

Maximum capacity: 4 x 290 ml Maximum permissible density: 1.2 kg/dm³ Maximum speed: 15000 rpm Maximu (more)m acceleration: 24400 RCF Maximum kinetic energy: 18500 Nm Dimensions (WxDxH): 457 x 600 x 418 mm Weight: 51kg Equipped with: 1x Hettich 1798 swing-out rotor (max 4000 rpm) 4x Hettich 5268 insert (12 positions, ØxD: 13 x 52 mm) 2x Hettich insert (12 positions, ØxD: 17 x 82 mm)

This ALC Multispeed Refrigerated Centrifuge PK 121 R was removed from a university lab where it was  (more)surplus to requirements. The unit is in reasonable cosmetic condition but has been previously used. The start button is damaged but still works. The unit powers on and has been tested. It spins up to 4100rpm, but the rotor is rated at 4300rpm. When set to its lowest which is -10 degrees it got down as low as -12. When set to its max which is 40 degrees it displayed 39 and was at 37. The Rotor number displayed T515.The Buckets Serial number is 0306/01.The buckets Cat Number is 11210335.The number on the bottom of the buckets is Ch. 007027 S.303.The bucket adaptors inside the buckets were numbered ALC R2035 & the Cat Number is 11172435. The ALC 2035 Adapter is for 50ml tubes.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Biosafe Smart-Max AS-310 Automated Stem Cell Cyroprotectant System Lab This item was removed from a  (more)university where it was surplus to requirement. It is in good cosmetic condition and powers on, but the screen remains blank. Also, it fails to communicate with a PC and emits a burning smell. Therefore, it is listed as Spares/Repair.

Eppendorf 3 x 2.6/7ml Adapters for F-34-6-38, Cat. # 022637279 New in torn packaging Eppendorf 3 x t (more)ubes 2.6 - 7 ml / 75 mm Adapters for fixed angle rotor F-34-6-38, Cat. # 022637279. For use with 5804/R and 5810/R centrifuges. This is a two piece set, and the adapters are new in torn packaging. INCLUDED: The Eppendorf 3 x 2.6/7ml Adapters for F-34-6-38, Cat. # 022637279 includes: - Full 6 Month Parts and Labor Warranty

Labconco Clear Chamber with 8Valves, Short, 12.0 " dia. x 15.3 " h12.0"diameter acrylic chamber for  (more)all FreeZone Freeze Dryers. Provides visibilityfor bulk freeze drying. Accommodates Short Product Shelves (7317100). Includesaluminum lid with eight neoprene valves with plastic knobs for use with both1/2" and 3/4" adapters, cap for vacuum port and pass through forelectrical cords. 8" diameter opening to collector on bottom of chamber.Will fit 10.12" or 14.0" diameter condensers.DryingChambers provide a means to attach flasks to your freeze dryer or containsamples in bulk. 12.0 in. dia. acrylic chamber for all FreeZone™ Freeze Dryers Provides visibility for bulk freeze drying Accomodates Product Shelves (3 shelves) 7317100 Includes aluminum lid with 8 neoprene valves with molded plastic knobs & one pass-through for electrical cords For use with 1/2 in. & 3/4 in. adapters Will fit 10.12 in. or 14.0 in. diameter condensers 8 in. diameter opening to collector on bottom of chamber INCLUDED: The Labconco 7318802 Clear Chamber with 8Valves, Short, 12.0 " dia. x 15.3 " h includes: - Aluminum Lid with 8 Neoprene Valves (For use with 1/2" & 3/4" adapters) - Vacuum Port Cap - Pass Through for Electrical Cords - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Equipped with non-slip rubber mats on the shelves.

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 250 mm Material: stainless steel with a silicone tip for standards up to 500 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW