Heraeus Labofuge 400 Centrifuge

6 x ALC Centrifuge Buckets For Rotor Lab This item was removed from a university where it was surplu (more)s to requirements. The buckets are in fair cosmetic condition and consist of the following: - 2 x ALC R2017 buckets designed to hold 7 x 15ml tubes - 2 x ALC R2012 buckets designed to hold 5 x 25ml tubes - 2 x ALC buckets designed to hold 2 x 50ml tubes

Heraeus Sorvall 75006444 5650rpm 2x500g Swinging Bucket Centrifuge Rotor Lab This was removed from a (more) university lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. No buckets are supplied. Maximum RPM: 5650. Maximum Load: 2 x 500g.

Hettich Rotina 380 R This item was removed from a university where it was surplus to requirement. I (more)t is in good cosmetic condition both internally and externally. The item powers on and works as intended, it has been temperature-tested. (Thermometer not included) The Unit comes with the following Rotors: Hettich 1760 Rotor2 x 500 g4000 RPMS/N - 007162 Hettich 1798 Rotor4 x 300 g4000 RPMS/N 006337Buckets - 4 x Hettich 5092 005159

Hermle Z327 Centrifuge Speed Range 200 to 18,000 RPM Maximum Capacity 4 x 200ml Warranty 5 Year Manu (more)facturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor specific) - A large variety of rotors and accessories - Audible signal at the end of each run with several melody options - Noise level under 63 dBA at max. speed - Manufactured according to international safety regulations, i.e. IEC 61010 - Rotor exchange is easy to handle - Optimized airflow system keeps the samples cool (Z327) - Stainless steel chamber Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high-volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide! Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z327 Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Benchmark Sprint™ 8 Plus Clinical Centrifuge with 8 x 15ml fixed angle rotor, 115VFeatures - 8 Posit (more)ion fixed angle rotor rotor - Ideal for rapid production of serum and plasma - Unique EZ-Scroll™ touch pad - Digital speed control in rpm or rcf with adjustable acceleration and deceleration rates (up to 6,800rpm/4,445xg) - Program storage up to 99 - Adjustable speed and timer The SPRINT™ 8 PLUS Clinical Centrifuge, with its 8 x 15ml fixed rotor, offers a notable advantage over traditional clinical centrifuges. With an increased speed capability of up to 4445xg, it allows for the separation of serum or plasma in as little as 2-3 minutes. With a large back-lit display, high-capacity rotor, and adjustable settings, it provides efficient and user-friendly operation Features such as the imbalance detection system and electrical lid lock ensure safe operation. Additionally, momentary operation capability adds further convenience to the centrifuge's functionality. INCLUDED: The Benchmark Sprint 8 Plus Clinical Centrifuge with 8 x 15ml fixed angle rotor, 115V includes: - 8 x 15mL Fixed Angle Rotor - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

2 x SYElectronics 6 Button Keypad Controllers These were removed from a university lab where it was (more) surplus to requirements. Both are in reasonably good cosmetic condition but we were unable to test them at our facility.

This listing is for a Sartorius Cubis MCE10202S-2S00-0 Balance with printer. The unit is in full wo (more)rking condition and is ready for immediate release. Experience unparalleled precision and versatility in laboratory measurements with the Sartorius Cubis MCE10202S-2S00-0 Balance, a standout model in the innovative Cubis II series. Key Features: High Capacity and Readability: With a capacity of 10,200 g and a readability of 0.01 g, this balance is ideal for weighing larger samples with utmost accuracy. Exceptional Reproducibility: Achieve consistent results with a reproducibility of ±0.007 g, ensuring reliable data across multiple measurements. Impressive Linearity: Maintains accuracy with a linearity specification of ±0.02 g, making it suitable for critical weighing tasks in demanding environments. Spacious Pan Dimension: The balance features a spacious weighing pan measuring 8.1 in x 8.1 in (206 mm x 206 mm), accommodating a variety of sample sizes comfortably. User-Friendly Display: Equipped with an MCE Touch Screen Back lit display, it offers intuitive navigation with manual level control and a motorized internal calibration feature for convenience. Additional Information: Modular Weighing System: The Cubis II series allows for individual configuration from various components, enabling users to adapt the balance to specific weighing tasks seamlessly. Versatile Applications: This balance is suitable for a broad range of laboratory applications, including research, quality control, and educational settings, making it a versatile tool for scientists and educators alike. Range of Options: The Cubis II series boasts a selection of premium laboratory balances with maximum loads ranging from 2.1 g to 70 kg and readability options between 0.1 μg to 1 g, providing tailored solutions for different measurement needs.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.