Heraeus Function Line Labofuge 400R Centrifuge Lab NOTE - THIS IS A SPARES/REPAIRS ITEM

Jouan B4i Benchtop Centrifuge with S40 Rotor This item was removed from a university where it was su (more)rplus to requirements. The centrifuge was successfully run for 60 minutes at 4,000rpm, the maximum speed recommended for a swing-out rotor on this unit. It is in fair cosmetic condition, showing signs of general use. Includes: - S40 Swinging bucket rotor with 4 buckets - 4 additional buckets - 12 x bucket inserts Specifications: - Model: B4i - Serial No.: 30202056 - Maximum RPM: 14,000 (unit); 4,300 (rotor)

This Thermo Shandon Cytospin 4 Cytocentrifuge was removed from a university lab where it was surplus (more) to requirements. The unit has been inspected by a service engineer who fitted new plastic hinges fitted. The repair isn't perfect, but it's functional It also appears to have a battery error. There is a battery soldered to the main board, it probably needs replacing. The unit shows an error 4 code when first switched on but if you press stop the code goes away, and the unit starts up normally. The error relates to a discharged battery. The unit is in otherwise full working condition and is in good cosmetic condition with just the marks from the repairs.

This Piramoon PTI Fiberlite F8S-6x1000Y 8000rpm Centrifuge Rotor was removed from a university lab w (more)here it was surplus to requirements. The unit is in reasonably good cosmetic condition but has some scuff marks around the thread. It has not been tested at our facility.

This Eppendorf Refrigerated Laboratory Centrifuge 5804-R was removed from a university lab where it  (more)was surplus to requirements The unit has had a replacement actuator and gas strut fitted by a service engineer who then fully tested the unit. Speed tested to 3600rpm (rotor not included). It was then temperature tested with a digital thermometer (not included) 37ºC our thermometer showed 34ºC.4ºC our thermometer showed 1.0ºC.-9ºC(min) our thermometer showed -5.0ºC. We would suggest that it was the probe placement that caused the temp readings to be a bit inaccurate.

Beckman Optima L-100 XP Ultracentrifuge Lab This item was removed from a university where it was sur (more)plus to requirement. It has been professionally serviced, is in full working order, and is in good cosmetic condition. The full report is available on request. Also includes: 1 x Service Book 1 x Log Book 4 x Foot Plates

Hermle Z216 M Centrifuge w/ 44 Place RotorFeatures - Brushless induction drive - Microprocessor cont (more)rol - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ 44 Place Rotor includes: - 44 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Technical features Flow rate (max.) 34 l / min Final vacuum (max.) 8 mbar (abs.) Pressure (max.) 1 b (more)ar (rel.) Permissible fluid temperature 5-40°C Valve material: FFPM Diaphragm material PTFE coated Pump head material: PTFE Applications Rotary evaporation Degassing Drying of the gel Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Chemically resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable Maintenance free ATEX compliant only for internal atmosphere (Ex) II 2 / -G IIB + H2 T3 Download the data sheet for further information and accessories NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Automatic rotational scales is designed for operation in technological lines of cylindrical packaged (more) goods, like aerosols, sprays, glass and plastic bottles, etc. Control unit is based on Windows Embedded software and SQL database server. Industrial computer is designed to operate in hard industrial conditions. Its cooperation with specially prepared Windows platform makes the system stable and allows for holding set parameters. Graphic and touch screen communication panel makes operation very easy and intuitive which has already been appreciated by users. Rotational device is not equipped with its own conveyor belt, it is mounted over an existing one, which significantly shortens and simplifies its installation. The scale is pneumatically powered. This provides high durability and reliability. Application: Rotational scales is intended to control cylindrically shaped single packages, like aerosol, with diameter 35- 66mm*. System operates in accordance with regulation on Control of Prepacked Goods. Main application: · Chemical industry, · Pharmaceutical industry, · Distilling industry, · Food processing industry. * it is possible to weigh containters with other diameter Functions Rotational scales provide 100 % control of goods transported on the processing line. Goods that do not meet set thresholds are discriminated from the line. Control of goods in accordance with regulation on Control of Packaged Goods, Acquiring data on controlled goods, Definable access levels for scale users, Discrimination of defective goods by weight, Extended statistics conducted in real time, Built-in line performance meter, Reports generated automatically in accordance with the weighing mode, Export of reports to PDF files, Cooperation with other devices in a processing line, Remote start and stop function, Detection of line congestion, Detection of empty line, Cooperation with computer software. Basic technical data Industrial Windows Embedded system, Industrial computer designed for operation in hard conditions, Graphic touch screen, Databases applying SQL servers, Interfaces and ports: RS232, USB and Profibus, Ethernet, Controlling - informative outputs control, IP55 or IP65 Cooperation with peripheral devices Rotational scale is prepared to cooperate with peripheral devices, and devices form a processing line. I/O set provides broad configuration possibilities and full integration of the scale with an existing processing line. Cooperation with dosing device with feedback, Cooperation with barcode scanner, Printouts on receipt printers, Remote control , Keeping records from weighing on a computer. Implementation options: Separate discriminating set for "too light" and "too heavy" goods, Sounder and/or Warning tower lights, Cooperation with printers and label printers, Two USB ports, Profibus and Modbus interface support, Weighing record application.

Motic AE2000 LED Binocular Inverted Microscope Magnification Range 4x to 20x Optical System Colour C (more)orrected Infinity (CCIS) Illumination 3W LED Features - Entry level model of Motic's inverted microscopes - Designed for routine live cell inspection with an easy and flexible set up - Offers superior image quality when viewing cell cultures in microbiology, living organisms, and tissue - Switch from Brightfield to Phase Contrast by a simple push of the phase ring slider - Fixed stage plate carries a glass or metal insert for quick overview and comfortable change of objectives - Coaxial coarse and fine focusing system with tension adjustment - Fine focus precision of 2 μm - Auto ON-OFF illumination function via built-in IR-sensor - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The AE2000 is a revolutionary design that is packed with features and sets a new benchmark in affordable inverted microscopy. The AE2000 microscopes are Motic’s entry models of inverted microscopes, providing a flexible optical concept to meet best image quality and robust design for a long lifetime under rough lab conditions. This version of the Motic AE2000 is an inverted microscope with a binocular head and 4X, 10X and 20X objectives. The AE2000 is the perfect microscope for routine microbiology in clinical and pharmaceutical laboratories, also offering best options for university teaching. In full accordance with Motic’s CCIS Infinity System, the LWD Plan Achromatic objectives with an ingenious Phase contrast concept deliver a remarkable image quality. 10X and 20X Phase Contrast objectives are an integral part of all standard packages, while the optional 4X Phase objective is dedicated to fast screening. A 40X Phase objective is available too. The AE2000 stand carries a quadruple nosepiece with a precise click stop of objective positions. Rich illumination power is given by the 30 Watt Halogen light source in a Fixed-Koehler setup, simply interchangeable with 3W LED modules of different color temperatures. INCLUDED: The Motic AE2000 LED Binocular Inverted Microscope includes: - Widefield High Eyepoint Eyepiece N-WF 10X / 20mm - Side Facing Quadruple Nosepiece - PL PH 4x, PL PH 10x, and PL PH 20x Objectives - Phase Slider Ph0, BF, Ph1 - Centering Telescope & Keys - Plain Stage with Metal & Glass Inserts - 45mm Blue, Green and Neutral Density Filters - ELWD Condenser N.A. 0.30 (WD = 72mm) with Filter Holder - Allen Hexagonal Key and Vinyl Dust Cover - 3W LED with Intensity Control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty