Heathrow Sprout Minicentrifuge

Maximum capacity: 4 x 500 ml Maximum permissible density: 1.2 kg/dm³ Speed range: 100 – 15000 rpm Te (more)mperature setting range: -20°C to 40°C Minimum rotor temperature: < 4°C Maximum kinetic energy: 63097 Nm Dimensions (WxDxH): 570 x 650 x 489 mm Weight: 124 kg Equipped with: 1x Sigma 11150 swing-out rotor (max 5100 rpm) 4x Sigma 13215 bucket 4x Sigma 18015 insert (12 positions, ØxD: 17 x 90 mm)

This was removed from a university lab where it was surplus to requirements THe unit powers up but s (more)hows error 48 which is a door lock error. It seems like the door solenoid is not being sent a signal. It is sold for spares/repairs. No rotor included.

GE Healthcare / Cytiva S-2000 - Centrifuge/Therm. Module Lab This item was removed from a university (more) where it was surplus to requirement. It is in excellent condition, we are unable to test it further due to the nature of the item. Item No/Product Name: 8800.O/Part No: 851 1332.Serial No: 239529.

Hermle Z446 Centrifuge w/ Swing Out Rotor The Z446 universal centrifuge series offers the highest ca (more)pacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446 Centrifuge w/ Swing Out Rotor includes: - Z446-750 4 x 750ml Swing Out Rotor - Z446-750-B50 7 x 50ml Conical Buckets (Set of 2) - Z446-750-B15 17 x 15ml Conical Buckets (Set of 2) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 M Centrifuge w/ 44 Place RotorFeatures - Brushless induction drive - Microprocessor cont (more)rol - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ 44 Place Rotor includes: - 44 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

This RADIANCY SpaTouch II Laser was removed from a fashion college where it was surplus to requireme (more)nts. The unit powers up but the lamp is not working. It has not been tested further. It is in reasonably good cosmetic condition but has some marks from use. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

Sony 3CCD Colour Video Camera DXC-390P and Adaptor CMA-D2CE This was removed from a university lab w (more)here it was surplus to requirements. All modules power up but have not been tested further. Everything is in good cosmetic condition with minor marks. Camera:Model DCX-390PSerial No. 4018813-CCD 1/3" format, 800 tv lines S/N 63, RGB C-mount camera Adaptor:Model CMA-D2CESerial No. 27147 Included with the camera and adaptor are a power lead, a dc power lead and data lead between the two units.

Binocular microscope bScope BS.1152-PLHi, eyepieces HWF 10x / 20 mm quintuple nosepiece with the pha (more)se of plan PLPHi 10/20 / S40 / S100x infinite oil corrected objectives, stage 131 x 152/197 mm with mechanical built-in 77 x 36 stage X-And without rack mm Condenser phase contrast Zernike with iris diaphragm and filter holder.3 W NeoLED ™ Kohler illumination and integrated power supply. Supplied without rechargeable batteries. Eyepieces HWF 10x / 20 mm Head binocular, type Siedentopf, tube inclined 30 °. Interpupillary distance 48-75 mm diopter Adjustment on the left pipe Nosepiece revolving quintuple reversed in ball bearings Plan of phase PLPHi 10x, 20x, S40x, oil immersion S100x infinity corrected IOS objective for phase contrast All the optics are coated with antifungal treatment and anti-reflective for maximum lightweight performance Settings coaxial coarse and fine with 180 graduations. Precision 1.1 µm, 0.2 mm per rotation. Total distance of approximately 18 mm Tojuste friction Stage without a frame of 131 x 152/197 mm with mechanical mechanism 77 x 36 mm scenario without rack Condenser Zernike height adjustable N. To 1.25 with diaphragm & filter iris Kohler Illumination 3 W NeoLED ™. Internal power supply 100-240 V (CE) Supplied with power cable, dust cover, immersion oil 5 ml in case of polystyrene foam and without AA rechargeable batteries

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315&rsquo;s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Automatic checkweigher DWT/RC/HYF series is dedicated to work on technological lines of food industr (more)y, where high humidity and frequent high pressure cleaning are the major issues. The construction has been designed to enable fast and easy cleaning. Special emphasis has been put on elimination of gaps, spaces and flat surfaces susceptible to condensates and waterstains. The structure of the conveyor belt allows washing it inside and outside without dissembling. The electronics has been placed high above the weighing platform for minimizing the possibility of inundation of the control panel. The checkweigher DWT/RC/HYF series is created in accordance with vertical space division. &ldquo;Clean zone&rdquo; ranges from the floor to the level of the conveyor belt (the area where food and production waste accumulates). &ldquo;Technological zone&rdquo; is placed above the production line. The control mechanism is based on a terminal HY series, facilitating easy communication between the operator and the machine and providing additional features. Standard functions: - Database of operators and products - RS 232/485 and Ethernet interfaces - I/O control - Current weighing statistics - Automatic printouts - Reports - Cooperation with computer software Additional functions: - Faulty goods discriminator - Barcode scanner - The checkweigher can be equipped with standard ink printers and labelling printers allowing to print the tags of the weighed products - Sounder and/or Warning tower lights - Cooperation with feeders, mounted to the front side, in a feedback system.