Fiberlite F18-8x50cy Fixed Angle Rotor THERMO SCIENTIFIC

SIGMA 11222 oscillating rotor with 2 rectangular buckets 13222 Max. plate height : 56mm Max speed (3 (more)-18KS / 3-18KHS): 3,000 rpm Max RCF (3-18KS / 3-18KHS): 1.218 x g Max load per support: 337 g Tmin at max speed. : <4°C Angle: 90°

Eppendorf S-4-104 Swing Bucket Rotor with Plate Buckets The Eppendorf S-4-104 Swing Bucket Rotor wit (more)h Plate Buckets, is a centrifuge rotor designed for use with the Eppendorf 5810/R Series centrifuges. This rotor has a maximum speed of 3,900 RPM and a maximum relative centrifugal force (RCF) of 2,568 x g. It can accommodate a maximum capacity of up to 16 x Microplates or 4 x Deepwell Plates, making it suitable for a range of applications in biological, biochemical, and clinical research. Overall, the Eppendorf S-4-104 Swing Bucket Rotor with Buckets is a reliable and versatile centrifugation accessory that is ideal for high-throughput sample processing in laboratories. INCLUDED: The Eppendorf S-4-104 Swing Bucket Rotor with Plate Buckets includes: - S-4-104 Swing Bucket Rotor - 4 x Plate Buckets with Carriers - Full 1 Year Parts and Labor Warranty Eppendorf S-4-104 Swing Bucket Rotor with Plate Buckets SpecificationsMaximum Speed3,900 RPMMaximum RCF2,568 x gMaximum Capacity16 x Microplates or 4 x Deepwell PlatesRadius15.1 cmCentrifuge CompatibilityEppendorf 5810/R SeriesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

This item has just arrived in our stock. Please enquire for further details.

This Waters Alliance HPLC System was removed from a university lab where it was surplus to requireme (more)nts. The lab believe it was in working order when last used, but has stood for 10 years unused. All the modules powered up but we were unable to test them further at our facility. The system is in reasonably good cosmetic condition with marks and stains. Included in the system are; 1 x Waters 2695 Separations Module 1 x Waters Scanning Fluorescence Detector 1 x Waters 486 Tunable Absorbance Detector 1 x PC (Windows XP) Running Millennium Software. Manuals;1 x Waters instruction manual1 x Chromquest 4.2 manualVarious books associated with the Item. A selection of spare parts.

VACUUBRAND ME 4C NT Chemistry Diaphragm Pump Ultimate Vacuum 70 mbar (52 torr) Maximum Pumping Spee (more)d 2.6 cfm at 60Hz Number of Heads/Stages 2/1 Features - Outstanding chemical resistance - High performance even at low vacuum levels - Whisper quiet - Low vibration - Long diaphragm life, maintenance-free drive system Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. The NT-series features further improved performance data, higher tolerance for condensates and simplified maintenance. The ME 4C NT is also available as chemistry vacuum system ME 4C NT +2AK with inlet separator to protect the pump against particles and liquid droplets, plus outlet separator to collect condensate. One-stage chemistry-design diaphragm pumps are an excellent choice for applications with corrosive gases and vapors which do not require very deep vacuum levels. They do not consume water and therefore do not produce any contaminated waste water. Typical applications are filtration as well as concentration of solvents with low boiling points. The ME 4C NT is recommended for processes which require higher flow rates. The chemistry vacuum system ME 4C NT +2AK with inlet separator and condensate catchpot is an excellent choice for rugged applications and for collecting condensates at the exhaust of the pump.INCLUDED: The VACUUBRAND ME 4C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Julabo CORIO CP-BC12 Heating Circulator, 115V/50-60Hz Working Temperature Range 20°C - 200°C Heating (more) Capacity 1000W Fluid Type Water, Silicone Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over between internal and external circulation - USB &amp; RS232 connection - High-quality bath tanks made of stainless steel with bath lid and drain tap - Integrated cooling coil for counter-cooling CORIO™ CP heating circulators are suitable for temperature applications to 200 °C with circulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CP circulator incorporates easy change-over for control of fluid circulation internally or externally.Pump inlet/outlet fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. Systems include insulated stainless-steel tanks with integrated cooling coil and drain ports. Bright LED display with easy to use interface including USB and RS232 connections for external PC control and data-logging. PID temperature control provides ±0.02 °C stability. Adjustable centrifugal pump capacity of 8-27 L/min with pressure from 1.5-10.2 psiClass III (FL) according to DIN 12876-1INCLUDED: The Julabo CORIO CP-BC12 Heating Circulator, 115V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Bath Lid - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW