FC5707-K, Ohaus

PTI F10S-6x500 10,000RPM Rotor Lab This item was removed from a university laboratory where it was s (more)urplus to requirements. The rotor is in good cosmetic condition but has not been tested further. Specifications:- Rotor Speed: 10,000 RPM - Capacity: 6 x 500 ml test tube holders - Serial No.: 60628

This listing is for a Thermo Scientific FiberLite F14-6x250y Centrifuge Rotor. The unit is in full  (more)working condition and is ready for immediate release. The Thermo Scientific FiberLite F14-6x250y Centrifuge Rotor is a robust and highly functional component designed for a variety of laboratory applications. Here is a comprehensive overview of its key features, specifications, and benefits: Key Features and Specifications Capacity: Accommodates 6 tubes with a volume of 250 mL each Maximum Speed: 10,000 rpm (up to 14,000 rpm for compatible centrifuge models) Maximum RCF: 15,316 x g (up to 30,100 x g for some compatible models) Rotor Angle: Fixed angle of 23° K Factor: 2737 Maximum Tube Dimensions: Length: Up to 125 mm Diameter: Up to 62 mm Radius (Metric): Minimum radius of 3.7 cm Biocontainment: Yes, designed for safe handling of samples Key Benefits Lightweight and Innovative Construction: Made from carbon fibre, allowing for rotor designs that are not feasible with traditional metal technologies. Durability: Corrosion and fatigue-resistant materials ensure the structural integrity of the rotor, promoting long-term reliability. Long Warranty: Backed by a 15-year warranty, providing confidence in the product’s quality and performance. Auto-Lock Rotor Exchange: Features a secure, push-button rotor exchange mechanism that allows for quick swapping of rotors in less than three seconds, streamlining the workflow in the laboratory. This centrifuge rotor is tailored for both research and clinical settings, offering unique advantages that enhance user experience and operational efficiency while delivering reliable performance.

This listing is for a Thermo Scientific TX-400 Centrifuge Rotor with Buckets. The unit is in full w (more)orking condition and is ready for immediate release. Supplied with x4- 75003655 Round Buckets Maximize the efficiency of your centrifugation processes with the TX-400 rotor, specifically designed for use with various Thermo Scientific centrifuges. Key Features: Capacity: Accommodates 4 x 400 mL samples, making it suitable for larger volumes in a single run. Impressive RCF: Achieves a maximum relative centrifugal force (RCF) of 4696 x g, allowing for effective sedimentation of a variety of sample types. Speed Capabilities: Operates at a maximum speed of 5000 rpm, providing flexibility for different centrifugation protocols. Tube Specifications: Diameter: 80 mm for standard tubes. Length: Capable of holding tubes up to 125 mm in length. Radius: Designed with a radius of 16.8 cm for optimal performance. Type: Features a swinging bucket design, allowing for smooth and efficient separation as the buckets swing outward during centrifugation. Biocontainment Certified: The rotor is certified for biocontainment by CAMR, ensuring safety when working with biological samples. Compatibility: Specifically designed for use with the following Thermo Scientific centrifuges: Sorvall Legend X1 Sorvall ST 16 Multifuge X1 Megafuge 16 SL 16

This Beckman Coulter Type 70 TI Centrifuge Rotor 70,000 RPM was removed from a university lab where  (more)it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used. Capacity: 8 x 25ml Max RPM: 70,000

Thermo 75003614 Buckets for TX-750 Rotor The Thermo 75003614 Buckets are rectangular-shaped buckets  (more)designed to be used with the TX-750 Swing Bucket Rotor. They can hold up to 4 x 250ml tubes and are capable of a maximum speed of 4,500 RPM and a maximum RCF of 4,415 x g. These buckets are made from durable materials that are capable of withstanding high-speed centrifugation, making them suitable for high-throughput applications. Whether you're working in a research or clinical laboratory, these buckets are a reliable choice for your centrifugation needs. INCLUDED: The Thermo 75003614 Buckets for TX-750 Rotor includes: - Set of 4 Buckets - Full 6 Month Parts and Labor Warranty Thermo 75003614 Buckets for TX-750 Rotor SpecificationsMaximum Speed4,500 RPMMaximum RCF4,415 x gMaximum Capacity4 x 250mlMaximum Radius19.5 cmRotor CompatibilityTX-750 Swing Bucket RotorDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Thermo Multifuge X3 FR refrigerated centrifuge. Maximum speed for oscillating rotors 6000 rpm (7164  (more)xg) and for fixed angle rotors 15200 rpm (25,830 xg). Adjustable temperature from -10°C to +40°C (CFC-free). Timed from 1 to 99 h, 59 min or continuous operation. Programmable and 99 preset programs. (HxWxD) 840*546*670mm; 152.20 kg plus rotor. PDF User Manual. Includes TX-750 oscillating rotor (75003607) of 4 x 1000 ml and maximum speed of 4,700 rpm. (4.301 xg) Acceleration and braking time 65/50 s. - Precooling with direct button. - Maintenance-free induction motor. - Automatic rotor locking system with button. - Microprocessor control. - Internal memory that saves the most recent data. - RCF selection. - Temperature and pre-temperature control. - 9 acceleration curves and 10 braking curves. - Automatic rotor recognition - Recognition of electronic imbalance. - Auto-Lock® III rotor system allowing installation and exchange of rotors with the push of a button. - Automatic lid closure and locking. - Digital display. The Thermo Multifuge X3 FR refrigerated centrifuge is high-quality laboratory equipment that offers exceptional performance. Designed to meet the needs of scientists and research professionals, this centrifuge features a 4 x 1000 ml TX-750 (75003607) swing rotor, allowing large sample volumes to be processed efficiently. Thanks to its advanced cooling system, this centrifuge ensures a constant and precise temperature during the centrifugation process, which is especially important to preserve the integrity of heat-sensitive samples. Additionally, its ergonomic design and intuitive interface make it easy to use and allow for hassle-free operation. Thermo Multifuge X3 FR offers a wide range of functions and features, such as the ability to program different spin profiles, adjust spin speed and time, and select between different acceleration and deceleration modes. In addition, it has a high-resolution LCD screen that clearly displays centrifugation parameters and allows real-time monitoring. It has four with lockable wheels. With its ability to process up to 4 1000 mL tubes simultaneously, this centrifuge is ideal for high-demand applications such as separation of cellular components, protein purification, and sample preparation for molecular analysis. Its robust and durable construction ensures long life and reliable performance. 17 optional rotors In short, the Thermo Multifuge X3 FR refrigerated centrifuge is an indispensable tool in any laboratory that requires efficient and reliable centrifugation. With its high-capacity oscillating rotor and advanced cooling system, this centrifuge delivers exceptional performance and ensures the integrity of heat-sensitive samples. Its ergonomic design and intuitive interface make it easy to use, while its wide range of functions makes it a versatile choice for a variety of research applications.

Beckman Coulter Biomek NXp Automated Liquid Handler with PC & Software Lab This was removed from (more) a university lab where it was surplus to requirements. The unit is in reasonable cosmetic condition. It does have various marks and signs of general use.The robot is able to be 'homed' fine and it responds to commands via manual control. The Tiploader also works as it should. This and the gripper require an air compressor which is not included. We used one from stock to test it. The system consists of: 1 x Beckman Coulter Biomek NXp Robot.s/n A318410173.Cat No A31841.96 Well head. 1 x Beckman Coulter Tiploader. 1 x Beckman Coulter AccuFrame. 1 x Microscan MS-3 Laser (Barcode Reader) 1 x Dell Optiplex 380 PC with monitor, keyboard & mouse.This PC is fitted with the HDD from the original Lenovo PC. The PC has the Biomek NX software installed. Version 3.3 build 14.

Sigma 3-16KL Centrifuge This item was removed from a university laboratory where it was surplus to r (more)equirements. The centrifuge is in very good used cosmetic condition, showing signs of general use. The rubber boot around the motor shaft is perished and torn due to age and wear but can be easily replaced and does not affect the unit's operation. Functionality: - Powers up and runs as intended. - Tested at -10ºC and 37ºC, with temperatures reached as expected. Included Accessories: - Rotor - Sigma 11180 4700rpm Rotor with Sigma 13190 Buckets - Bucket Adapters: - 4 x Sigma 17355 - 4 x Sigma 17356 - 8 x Sigma 17358 - 4 x Sigma 17359 - 4 x Sigma 17362 - 4 x Sigma 17377 - 3 x Sigma 17190 lids for the buckets Also Included: - Instruction manual

Foldable 3 Shelf Trolley This item was removed from a university laboratory where it was surplus to  (more)requirements. It is in fair cosmetic condition with slight rusting on the feet. Dimensions (when open): 67 x 42 x 86 cm

Adam Equipment EAB 414I Equinox Analytical Balance, 410g, 0.0001g Capacity 410g Readability 0.0001g (more) Repeatability 0.35mg Features - Large, responsive 5’’ 800x480 pixel touch-screen display - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - RS-232 interface provides speedy connection to computers and printers - USB host for memory card - Built-in memory for storing products and settings - External calibration allows for verification and adjustment with weights ("I" models feature internal automatic calibration) - Selectable digital filtering helps minimize effects of vibration and disturbances - Security password control prevents unauthorized access - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Preset tare function speeds the process of repetitive weighing - Parts counting with freely selectable sample sizes - Multilingual display allows use in many different countries - Memory accumulation totals results - Check weighing with audible alarm The Adam Equipment Equinox Analytical and Semi-Micro Balances deliver remarkable precision to labs that perform highly detailed testing. The Equinox is ideal for research and quality assurance facilities; science education; precision counting; and production and manufacturing applications needing exceptionally precise results. Eight analytical models offer capacities from 120g to 510g and 0.1mg readability. A color touch screen display provides intuitive operation, with icon-driven menus and readily accessible applications and functions. The five-inch screen is generously sized, offering 800 X 480-pixel resolution for excellent visibility. INCLUDED: The Adam Equipment EAB 414I Equinox Analytical Balance, 410g, 0.0001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

LABORATORY INCUBATORS ILW SMART POL-EKO ILW - POWERFUL, FOR MICROBIOLOGICAL TESTS ILW incubators are (more) perfect for the stable and safe incubation of samples, in any working environment. They maintain a constant temperature from 0°C to 70°C (It's necessary to purchase automatic defrosting function, ILW PLUS, for all units operating at set point <=5°C to prevent icing). The version capable of reaching -10 °C is available as an option, while with the SMART PRO version you can expand the heating range up to +100 °C. More! Large touch display, alarms, lock, easy to clean stainless steel interiors will make the use of these incubators a breeze. Thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Available in the special models FOT (SMART version) and FIT (SMART PRO version) FOCUS: Photoperiodic (FOT) and phytotron (FIT) systems allow day/night simulation. While the FOT option allows you to turn the light on and off from the display thanks to a program, with the FIT option you can also control the intensity of the light. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. ILW SMART SERIES POL-EKO offers 5 models of refrigerated incubators with capacities from 56 to 749 litres. The ILW series are only available in the forced air version. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Internal glass door 4 - Shelf 5 - Condenser housing 6 - Solid external door 7 - Temperature sensor 8 - Ventilation 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 12 - Handle with lock 1 - Main switch 2 - Adjustable feet 3 - LAN port 4 - Fuse 5 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the FIT system (phytotron) for the ILW SMART PRO models. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - Automatic defrost function - Version up to -10°C - Reinforced version - Interior light - Photoperiodic system - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door