DiaMed ID-Centrifuge 24 S Centrifuge

Microcentrifuge Centurion Scientific C2012. Speed of 500 to 12,000 rpm (13.500 g). Timer 0 to 99 min (more). Brushless Motor, maintenance free. Chamber of stainless steel and alloy structure. Sensors for imbalance, overspeed and warming. Does NOT include rotor (can be purchased separately).

Hermle Z216 MK Refrigerated CentrifugeFeatures - Brushless induction drive - Microprocessor control  (more)- Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40°C) - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 M CentrifugeFeatures - Brushless induction drive - Microprocessor control - Active imbal (more)ance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

KNF SIMDOS 10 IP65 UFEM 1.10 ST.18RC2 Diaphragm Liquid Dosing Pump Flow Rate Range 1 to 100 ml/min  (more)Programmable Dosing 1 to 999 ml Maximum Suction Height 3 mWg Features - Small footprint - Simple, intuitive operation - Manual, analog control - Self-priming, can run dry - Consistent, reliable flow rate - Simple calibration - Adaptable to fluid characteristics The KNF SIMDOS 10 IP65 UFEM 1.10 ST.18RC2 Diaphragm Liquid Dosing Pump is a liquid dosing/metering diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Manual control of flow rate and dosing volume with LCD graphic display. INCLUDED: The KNF SIMDOS 10 IP65 UFEM 1.10 ST.18RC2 Diaphragm Liquid Dosing Pump includes: - Connection Kit (Hose and Screw-in Fittings) - Remote Control Cable - Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 5430R Refrigerated Centrifuge w/ Selectable Rotor The Eppendorf 5430R Refrigerated Centrif (more)uge w/ Selectable Rotor is a sophisticated and versatile laboratory device, tailored for a broad range of applications. It boasts a maximum speed of 17,500 RPM and a minimum speed of 100 RPM, coupled with an impressive maximum relative centrifugal force (RCF) of 30,130 x g. This centrifuge can accommodate various sample sizes with its maximum capacity of 48 x 1.5/2.0 ml or 6 x 50 ml. It features a broad temperature range from -11°C to +40°C, making it suitable for temperature-sensitive samples. The centrifuge is equipped with a timer that ranges from 30 seconds to 9:59 hours, including a continuous run option. Designed for user convenience, it includes a soft-touch, one-finger lid closure for ergonomic operation. The operation menu is menu-driven and multilingual, offering options in English, German, French, and Spanish, and is complemented by a large backlit display for ease of use. The device allows for quick access to routine programs with its five program keys and can save up to 50 user-defined programs. Enhanced safety features include automatic rotor recognition and imbalance detection. Additionally, the Eppendorf QuickLock System enables quick and easy opening and closing of the rotor lid, streamlining the workflow. INCLUDED: The Eppendorf 5430R Refrigerated Centrifuge w/ Selectable Rotor includes: - Selectable Rotor - Rotor Wrench - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5430R Refrigerated Centrifuge w/ Selectable Rotor SpecificationsMaximum Speed17,500 RPMMinimum Speed100 RPMMaximum RCF30,130 x gMaximum Capacity48 x 1.5/2.0 ml or 6 x 50 mlTemperature Range-11°C to +40°CTimer30 seconds to 9:59 hours, with continuous runNoise Level< 56 dB(A)Maximum Kinetic Energy10,000 JDimensions (W x D x H)14.9 x 25.2 x 11.7 in. (38 x 64 x 29.6 cm)Weight123.5 lb. (56 kg)Electrical Requirements120V, 50/60Hz, 6A, 475WDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote