Centrifuge PROTEAL OMNIGRAFTER 3.0

The Frontier™ 5000 Multi Series centrifuges are multifunctional, compact, low speed centrifuges and  (more)ideal for general laboratory applications. The included rotor standard options can process both round and conical bottom tubes (including common blood tubes) and can be easily retrofitted with accessories to process smaller tubes. Included in the FC5706-K model you will have the angular rotor with a maximum capacity of 12 x 15 ml. Features: Maximum relative centrifugal force (x g) at 4.427 g; maximum speed 6,000 rpm; tube diameter without adapter 18 mm / 15 ml; outer/inner radius 110 mm; angle 32°. HOW DOES A LABORATORY CENTRIFUGE WORK? A careful explanation with the Ohaus FC5706 model. Video presentation of the Frontier 5000 Multi centrifuges. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. COMFORT Designed for comfortable use, Frontier™ Multi centrifuges feature convenient control on an intuitive interface, allowing for responsive operation even when wearing gloves. VERSATILE Frontier™ Multi centrifuges can accommodate standard 50 and 15 mL tubes, including common blood tubes. When used with accessories, the rotors can be adapted for sizes up to 1.5ml. SAVE SPACE Frontier™ Multi centrifuges save valuable bench space by integrating all of their functionality into a small footprint. TECHNICAL FEATURES Speed ​​range: 200 rpm – 6.000 rpm. Maximum relative centrifugal force: 4.427 g. Program memories: 99. Acceleration gear: 10. Deceleration gear: 10. Lid lock: by motor. Noise level: ≤60 ± 2 dB (A). Rotor Compatibility: Angled 12 x 15ml; Angled 6 x 50ml; Oscillating rotor 6 x 5 ml. Rotor recognition method: manual. Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous. Safety certification: CE; FCC.

This Sanyo MSE Mistral 2000R Refrigerated Benchtop Centrifuge was removed from a university lab wher (more)e it was surplus to requirements. The unit has been tested and is in working order. The RPM could be set up to 6500 but the rotor would only run up to 4500rpm. It was tested with a digital thermometer (not included).When the temperature was set to 4˚c, the thermometer read 5˚cWhen the temperature was set to -4˚c (minimum) the thermometer read -5˚c There is a Rotor inside with 4 x Buckets and 2 x Yellow 50ml Adaptors. It is in reasonably good cosmetic condition but has some minor marks from use.

Benchmark C2212 MyFuge 12 Plus Digital Mini Centrifuge w/ Combination Rotor The unique rotor design  (more)of the new MyFuge 12 Plus eliminates the need to switch rotors (or use a separate centrifuge) when changing between microtubes and PCR strips. The included, COMBI-Rotor allows for simultaneous centrifugation of up to 12 microtubes and/or 4 PCR strips.In addition, the MyFuge 12 Plus features a large digital display with adjustable speed (up to 7,000 rpm) and a digital timer. With built in rcf conversion, speed can be set/displayed in rpm or rcf.The MyFuge 12 Plus combines power with intuitive functionality making it the perfect companion in any laboratory.INCLUDED: The Benchmark C2212 MyFuge 12 Plus Digital Mini Centrifuge w/ Combination Rotor includes: - Power Cord - COMBI Rotor - Two Year Manufacturer's Warranty

Angular rotor for centrifuge Nr.12156 SIGMA 16500 rpm For 8x 50 mL With lid

Separating substances at medium rotational speeds: IKA G-L is the ideal midi centrifuge for all type (more)s of separation processes such as those found in molecular biology. It can be used with standard 1.5/2 ml vessels. The cover opens automatically at the press of a button. Capacity: 12 x 1.5/2.0 ml Permitted density: 1.2 kg/dm3 Centrifugal acceleration: 16500 G Speed range: 800 – 15700 rpm Timer: yes Timer display: 7 segment LED Unbalance sensor: yes Quick stop: yes Cover opening: automatic Dimensions (WxHxD): 200 x 140 x 280 mm Weight: 3.9 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Agilent   Model: 1260 Infinity II Description: The Agilent 1260 Infinity II HPLC syste (more)m, equipped with a refractive index and diode array detector, is ideal for the quantification of amino acids, sugars and organic acids. This system enables the analysis of metabolic activities of microorganisms. The use of the device supports the implementation of work within the framework of existing and new industrial collaborations. Key features: - Compatible with conventional and ultra-high performance LC: 1260 Infinity II quaternary pump and 1260 Infinity binary pump operate at up to 600 bar, a perfect complement to our InfinityLab Poroshell 120 columns - Analytical and semi-preparative purifications: The wide flow range of the 1260 Infinity II Quaternary Pump (up to 10 mL/min) perfectly supports standard and semi-preparative applications - Fast and precise gradients: The 1260 Infinity II Binary Pump is the perfect choice for fast and precise gradients with LC/MS as well as for UV-only systems - Lowest carryover: The multiwash function of the 1260 Infinity II Multisampler cleans all relevant injection areas between runs and rinses the outside of the injection needle with three solvents to reduce carryover to less than 10 ppm. - Reduced cycle times: With the unique Agilent dual needle design, run samples alternately through one or the other injection path. Cycle times can be reduced to just a few seconds, virtually eliminating traditional waiting times - whether for high volume loading or rinsing procedures. - Efficient sample handling and logistics: The 1260 Infinity II Multisampler with its flat wellplate drawers holds a maximum of 16 microplates and up to 6,144 samples - more than any other system. - Efficient column handling and temperature control: The 1260 Infinity II Multicolumn Thermostat holds up to four columns with direct access to each column through a quick-change switching valve that provides flexibility and eliminates the need to disconnect and reconnect columns - Higher data quality: The 1260 Infinity II Diode Array Detector HS delivers lower detection limits and higher data quality for greater confidence - Efficient control, acquisition and reporting: Agilent Instrument Control Framework (ICF) enables seamless control of Agilent LC instruments by third-party chromatography data systems Other data: Column capacity: 4 Depth: 468 mm Flow range: 0.2 to 10 mL/min with G7110B, G7111A, G7111B Injection range: 0.1-900 µL with extended injection range option Mains voltage: 100-240 VAC Maximum number of solvents: up to 15 with additional solvent selection valve Maximum number of temperature zones: 1 with vial sampler with integrated column chamber System pressure operating range: up to 600 bar Width: 435 mm Included modules: Solvent rack G7111B Quat pump G7116B 1290 MCT G7129A 1260 Vial sampler G7117C 1260 DAD HS The device/system offered here has been tested and is fully functional and ready for use.

BIOBASE BKQ-350SD-B large horizontal autoclave. Double door. Built-in steam generator. Capacity: 352 (more)L. Loading by car and trolley (included). Nine preset sterilization cycles, two test cycles and one auxiliary cycle: textile material at 121 ºC and 134 ºC, instruments at 121 ºC and 134 ºC, liquids at 121 ºC, plastic material at 121 ºC, glass and other solids at 121 ºC , Bowie-Dick test; leak test and program to be defined by the user. Camera and stainless steel cover. Automatic door closing. Illuminated indicators for door closing, running and end of cycle. Lifespan of about 10 years (20,000 cycles). Meets GMP requirements, CE marked. Water purification system, compressor and installation not included. Optional baskets and data-logging system. Camera size: 600 * 600 * 980mm. External size: 1286 * 1848 * 1240mm. Power consumption: 24Kw. Power supply: 380V, 50Hz.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Titrator SI Analytics TITROLINE EASY SCHOTT Included: TM96 stirrer Capacity: 20ml Depth: 205 mm Heig (more)ht: 310mm Width: 135mm Power supply: 230 V~; 50/60 Hz or 115 V~; 50/60Hz Peak power: 24 VA Weight: 2.4 kg Type of multi-parameter titrator In very good working order