Brandnew! Beckman Coulter Rotor JA 17 14 x 50 mL, 17,000 rpm, 39,800 x g

This listing is for a Thermo Fisher Scientific Labofuge 400R refrigerated Centrifuge. The unit is i (more)n full working condition and is ready for immidate realese. The Thermo Fisher Scientific Labofuge 400R is an air-cooled, quiet operating centrifuge, with temperature control for sensitive samples. This versatile refrigerated centrifuge has a temperature range between 0-40°C to help ensure low temperatures even during an extended run or when running at high speeds. The microprocessor control then monitors temperatures to prevent sample freezing. The wide range of compatible rotors, available from Thermo, allows users to fit most tubes. Easy Controls: The microprocessor control panel is set up front for easy access, with individual indicators showing temperature, speed, and RCF settings, as well as run time. Users can set their desired parameters quickly through the touchpad controls, choose a quick run for short spins, and engage a soft start/soft break for gentle processing of more sensitive samples. Spins are powered by an induction drive that’s maintenance-free for worry-free operation. Safety Features: The automatic imbalance detector will cut out the drive if the rotor is out of balance to protect components and your work. There is also rotor over speed protection to help reduce wear on components. The steel jacket system and durable construction help the system to comply with IEC 1010. The Labofuge 400R uses a highly effective cooling environmentally friendly technology, using standstill cooling, and R134A refrigerant.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hermle Z216 MK Refrigerated CentrifugeFeatures - Brushless induction drive - Microprocessor control  (more)- Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40°C) - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Max capacity: 4x 400 mL Max density: 1.2 kg/dm³ Max speed: 11000 RPM Max force: 13800 RCF Max kineti (more)c energy: 35000 Nm Dimensions (WxDxH): 580 x 690 x 410 mm Weight: 55 kg Equipped with: 1x Hettich 4394 Swing out rotor (max 4000 RPM) 4x Hettich 5051 bucket 4x Hettich 5268 insert (Capacity: 5 mL, Dimensions (ØxL): 12 x 81 mm)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

FIRLABO BC240 forced convection oven/incubator 100°C FROILABO / FIRLABO incubator Model: BC 240 Capa (more)city: 223 / 240 liters Temperature range: Ambient + 5°C to 100°C Interior dimensions: (L) x (D) x (H): 50 x 45 x 98cm External dimensions: (L) x (D) x (H): 63 x 64 x 123 cm 3 perforated stainless steel shelves, non-tilting 230 V / 50/60 Hz 1500W Weight: 82 kg Year of manufacture: 1998 Tested at 37°C

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. Under-Pan Weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Heidolph Hei-VAP Expert Control HL/G5B Coated Hand Lift w/ G5 Dry Ice CondenserThe Hei-VAP Series of (more) rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Hei-VAP Expert Control and Ultimate Control allow to centrally control all process parameters: vacuum, cooling temperature, rotation and heating bath temperature. Promising intuitive operation as all settings are configured centrally on the operating panel. In combination with the Control-Box, the panel can even be used as the central control unit to regulate the vacuum and the Hei-CHILL recirculation chiller as well. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Features: - 5" touch display - Clear display of all values (Basic/Advanced modes) - Timer - Max. temperature limitation - Multilingual menu with text alerts - Optional display of vapor temperature - USB and Micro SD plus LAN/RS 232 interfaces (Lab 4.0ready) - Control of any vacuum sources and Heidolph recirculation chillers - Solvent library - Favorites memory - Dynamic AUTOaccurate (DAA) - Ramp programming Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Expert Control HL/G5B Coated Hand Lift w/ G5 Dry Ice Condenser includes: - Heating Bath - G5 Dry Ice Condenser - Control Panel - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Vacuum Valve - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

The iBlot 2 Dry Blotting System was designed to deliver a high degree of convenience. The iBlot 2 Dr (more)y Blotting System is a true self-contained, plug-and-play system, with an integrated power supply, pre-packaged ready-to-use transfer stacks. Setup, teardown, and cleanup only takes minutes compared to the much more cumbersome and hands-on steps required for wet-tank transfer. The iBlot 2 Dry Blotting System has a simple touchscreen interface and pre-programmed optimized transfer programs, with the option to customize programs to suit your needs. In addition to ease of use and convenience, the iBlot 2 Dry Blotting System offers high-efficiency protein transfers for high downstream detection sensitivity—in many cases, higher than wet and semi-dry transfer methods. In the end, it helps you achieve more accurate detection using less sample. Transfer proteins in 7 minutes and move on quickly to the rest of your western blot processing. The iBlot 2 Dry Blotting System is designed to work with multiple polyacrylamide gel sizes, including the midi size (8 x 13 cm), E-PAGE 48 and 96 gels (13.5 x 10.8 cm), and mini gels (8 x 8 cm). The system is also compatible with all protein gel chemistries (tris-gylcine, bis-tris, tris-acetate, and tricine). Capacity: 1 – 2 mini, or 1 midi, or 1 E-PAGE gel Compatibility: 1.0 – 1.5 mm thick gels Transfer time: 6 – 10 min Transfer buffer: No buffer required Programs: Pre-programmed with six methods for transfer of proteins from various gel types or create custom programs Power supply: Internal (no additional power supply needed) Dimensions: 370 x 200 x 110 mm Weight: 2.3 kg