Benchmark C5000-6H-PT Sprint 6H Portable Clinical Centrifuge

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Scilogex DM0412 LCD Digital Clinical Centrifuge The DM0412 Clinical Centrifuge is ideal for the sepa (more)ration of serum, plasma, urea, blood samples, PRF and routine applications in hospital and research laboratories. The DM0412 conforms to international safety standards and regulations. SCILOGEX clinical centrifuges are certified with CE, cTUVus and FCC. MCA test according to IEC/EN61010-2-20 including explosion-proof and bio-safe tests. Passed EN61010-2-101:2002 requirements for invitro diagnostic (IVD) medical equipment. DM0412 Clinical Centrifuge Features: - High accuracy of speed, excellent performance - CPU controls all operating parameters including speed and time - RPM or G-force can be set and displayed - Operation can be timed from 30 seconds to 99 minutes or continuous running - Timer commences once the set speed is reached, so the separation time is more accurate - Gentle braking at low speeds with efficient separation - Parameters can be modified after the set speed is reached - Quick spins are possible by pressing and holding PULSE key - Interlock automatic door lock - Easy-to-read backlit LCD processing display and sound alert - High strength plastic rotor and excellent balance technology for quiet and stable operation - Brushless DC motor drive quickly and effortlessly accelerates the rotor to set speed - Comes with adapters and plugs for all tubes listed below - cTUVus approved for UL and CSA INCLUDED: The Scilogex DM0412 LCD Digital Clinical Centrifuge includes: - 10200316 Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z446-K Refrigerated Centrifuge w/ Microplate Rotor The Z446 K universal centrifuge series off (more)ers the highest capacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446-K Refrigerated Centrifuge w/ Microplate Rotor includes: - Z446-750-AC 4 x 750ml Swing Out Rotor - Z446-750-MP Microplate Carriers (Set of 4) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z216 MK Refrigerated Centrifuge w/ 44 Place RotorFeatures - Brushless induction drive - Micro (more)processor control - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40°C) - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge w/ 44 Place Rotor includes: - 44 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z206-A Centrifuge Max Capacity 6 x 50 ml Max. RPM/RCF 6,000 | 4,427 x g Running Time 59 min  (more)50s / 10s increments Five Year Warranty Five Year Warranty Five Year Warranty Five Year Warranty -->Features - Microprocessor control - Active imbalance detection and cut-off - One-hand closing - Emergency lid lock - Air cooling - autoclavable rotors - Diagnostic program - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion The Z206-A Compact Centrifuge is suitable for a variety of applications inside both the clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2ml to 50ml. A unique 6 x 5ml swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes. The advanced microprocessor controls feature an ergonomic turn knob that controls all settings (time, speed, accel/decel levels, etc.). The speed can be adjusted from 200 rpm up to a maximum speed of 6,000 rpm (corresponding to 4,427 xg) in the popular 50ml and 15ml rotors. The centrifuge lid features and automatic lid-lock that prevents it from being opened while the rotor is still in motion. In addition, a unique imbalance detection system is designed to automatically power down the motor in the event of improper loading of the rotor or any tube breakage. Compact, quiet, and versatile are just a few of the features found in the Z206-A centrifuge. Add to this, the proven safety features, and the result is the ideal centrifuge for a variety of clinical and molecular biology applications. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z206-A Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Equipped with: 1x MSE Mistral swing out rotor

Magnetic stirrer AREC.X 7 Precise and accurate thermoregulation for better reproducibility AREC.X 7  (more)is equipped with state-of-the-art heating plate technology, designed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. The AREC.X 7 can be connected to the external Pt100 probe or to the VTF for precise thermoregulation of the fluid. The probe guarantees thermoregulation up to 250°C, with an accuracy of ± 1.0°C, while the VTF guarantees excellent thermoregulation performance up to 300°C and an accuracy of ± 0.5°C. The VTF is equipped with a timer, for unsupervised operation and increased productivity. Powerful stirring for your lab reactions You can rely on the AREC.X 7 for demanding laboratory reactions, as it agitates volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. Absolute safety and ease of use for laboratory operators The AREC.X 7 hotplate stirrer guarantees a superior level of safety and protection for laboratory operators, since it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic soleplate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. Save time with the new control panel Thanks to the digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. AUTOMATIC FIRE EXTINGUISHER The automatic fire extinguishing system works by detecting the presence of fire and controlling the discharge of extinguishing media so that the damage caused by the fire is minimized. The automatic extinguishing system includes a fire detection system, an extinguishing control unit and condensed aerosol generators. Information on the front panel display facilitates programming and simplified use. The possibility of programming the delayed activation of the sirens, or the time and duration of the extinguishing system make the unit very efficient and flexible. HOW DOES IT WORK? In the event of a lithium battery fire, the automatic fire extinguisher suppresses the fire and neutralizes the decomposition products of the electrolyte such as Hydrogen fluoride (HF), forming stable products such as KF and KHF2. The neutralizing action prevents the formation of highly flammable gases, such as hydrogen (H2), bringing the internal temperature down below the threshold necessary for a new fire to break out. Constituent parts of the fire fighting system: - LPCB certified according to EN 12094-1 and EN54.2 and 4 - Fire detection and automatic extinguishing - Graphic display 128 x 64 pixels - Fire extinguisher button on front of unit - Key switch for switching off mode selection: manual only or manual and automatic - 3 siren outputs - Power supply with 3A - Low absorption at rest: only 40mA - Inputs and outputs for remote function control - Extinguishment stop button and extinguishing cancel button - Storing of data events - RS-485 for remote connection In the image, the focus on the internal FBN fire extinguisher, in the double door model. Recommended accessories: - Charging points: 4x6 sockets. Contact us for more information.

Yamato GLD202BB Rotary Vane Vacuum Pump with Rubber Hose, 115V Ultimate Pressure 6.7 x 10-3 mbar A (more)ctual Pumping Speed 200 L/min (50Hz) 240 L/min (60Hz) Weight 31 kg Features - High performance while maintaining low vibration and noise levels - Oil-back flow prevention mechanism - Large sized oil level gauge to ensure accuracy in monitoring vacuum processes - Multi voltage motor - Compatible with a variety of applications Introducing the GLD Series Rotary Vane Pump, a high-performance and low-noise vacuum pump designed to excel in various applications. This pump boasts an array of impressive features, including a gas ballast valve, oil-back-flow prevention mechanism, and a generously sized oil level gauge. With its multi-voltage motor and adherence to international standards, it ensures versatility and compatibility across different setups. Perfectly suited for applications in the fields of chemistry, scientific experimentation, analyzers, and laser systems, this pump also excels as a backing pump for electronic microscopes, semiconductor equipment, sputtering and vacuum evaporation equipment, as well as vacuum and freeze dryers. Plus, with a noise level of just 57 db(A) or less, it ensures a quiet and efficient operation. Experience superior performance and reliability with the GLD Series Rotary Vane Pump, your ideal choice for vacuum solutions.INCLUDED: The Yamato GLD202BB Rotary Vane Vacuum Pump with Rubber Hose, 115V includes: - Hose Clamp - NW25 Centering O-Ring - Rubber Hose ID 21mm / 1500mm - Oil Mist Trap - Power Cord - One Year Manufacturer's Warranty

Solvent delivery method: Parallel-type double plunger Plunger capacity: 10µL Maximum discharge press (more)ure: 40MPa Flow-rate setting range: 0.0001 to 10.0000 mL/min Flow-rate accuracy: No more than 1% or 0.5µL/min, whichever is greater (0.01 to 2 mL/min.) Flow-rate precision: No more than 0.06% RSD or 0.02 min SD, whichever is greater Pulsation: 0.1 MPa (for water at 1.0 mL/min. and 7MPa) Constant-pressure solvent delivery: Supported Plunger rinsing mechanism: Manual rinsing or automatic rinsing using optional product Safety measures: Liquid-leakage sensor, high-pressure/low-pressure limits Gradient type: Low-pressure mixing Number of mixed solvents: 4 max Dimensions (WxHxD): 260 x 140 x 420 mm Weight: 10 kg