Beckman Optima L-90K Ultracentrifuge Lab

Centrifuge PROTEAL OMNIGRAFTER 3.0 With UV Year of manufacture: 2016 Reference P1-1120 In excellent  (more)condition

Manufacturer: Beckman Coulter Model: L-100XP Ultracentrifuge Description: Whether your research invo (more)lves proteomics, cytomics or genomics, the Optima L-XP Series Ultracentrifuge plays a key role in the research process. The Beckman Coulter Optima L-100XP Preparative Ultracentrifuge features an on-board computer, powerful Optima eXPert software and an easy-to-use touchscreen. The Beckman Optima L-100XP and beyond Optima L-XP series offer superior functionality, optimized user efficiency and faster turnaround times than any other ultracentrifuge. Core features: - Up to 100,000 revolutions per minute - to push the boundaries of research. - 10 Acceleration profiles-9 slow rates or maximum acceleration from 0 to the set rate - 11 deceleration profiles-9 slow rates, coast to a stop without braking, or dynamic full braking   from the set speed - Low noise system <53 dBa Technical data: Maximum speed: 100,000 rpm Maximum heat output to the room under steady state conditions: 1.0kW/hr (3400 BTU/hr) Noise level 1 meter in front of the centrifuge: <53 dBa Ambient temperature range: 10 to 40°C ambient temperature Dimensions H x W x D: 125.7 x 94 x 67.3 cm Weight: 465 kg Scope of delivery: - L-100XP ultracentrifuge without rotor - Instruction manual as PDF via e-mail If you need a suitable rotor, we can help you! The device is in absolute top condition and has been 100% tested for function.

Max speed: 16400 rpm Temperature range: -9°C to 40°C Max centrifugal force: 25000 rcf Max kinetic en (more)ergy: 6100 Nm Max density of samples: 1.2 g/ml Dimensions (HxWxD): 250 x 310 x 597 mm Weight: 34.8 kg Equipped with: 1x Eppendorf FA-45-30-11 Aerosol-tight lid 1x Eppendorf FA-45-30-11 fixed angle rotor (max 14000 rpm; 30x 1.5 mL/2.0 mL micro tube capacity)

Sanyo MSE Mistral 2000R Benchtop Refrigerated 4500rpm Centrifuge This was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and is in full working order up to 4500rpm. It refrigerated well. It is in good cosmetic condition with minor marks from use. (Digital thermometer not included.) The buckets have 2 x (6 x 15 mil) &amp; 2 x (1 x 50 mil) adapters.

Hermle Z446-K Refrigerated Centrifuge w/ Microplate Rotor The Z446 K universal centrifuge series off (more)ers the highest capacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446-K Refrigerated Centrifuge w/ Microplate Rotor includes: - Z446-750-AC 4 x 750ml Swing Out Rotor - Z446-750-MP Microplate Carriers (Set of 4) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

MARSHALL Select MS-RE80A Tube Rotator Mixer, 0-80 RPM Speed Range 10 to 80 RPM Motor Type DC Motor O (more)perating Mode Continuous or Timing Features - Provides easy monitoring of speed and time settings - Made from stainless steel with an oxidation coating for longevity - Available in both plastic and stainless steel to suit various needs - Supports tubes of 1.5ml, 15ml, and 50ml for flexible use - Offers flexibility with continuous or timed modes up to 1199 minutes - Ensures reliable and consistent performance The MARSHALL Select MS-RE80A Tube Rotator Mixer is a highly adaptable and efficient solution for laboratory applications that require precise sample agitation. Offering an adjustable speed range from 0 to 80 RPM, this mixer provides fine-tuned control to meet diverse experimental requirements. The easy-to-read LCD display allows for accurate monitoring of speed settings, ensuring consistent and reliable mixing. Built with durable materials, the tube holder is crafted from stainless steel with an oxidation coating, and the clips come in both plastic and stainless steel options to accommodate tube sizes of 1.5ml, 15ml, and 50ml. The mixer can operate in continuous or timed modes, providing flexibility for various protocols. Equipped with a dependable DC motor and consuming just 40W of power, the MS-RE80A is both energy-efficient and highly effective. Its compact design, along with standard accessories such as a tube holder and stainless steel clips, makes it a valuable addition to any laboratory setup, with external dimensions of 20.1 x 8.7 x 10.2 inches and a gross weight of 3kg. INCLUDED: The MARSHALL Select MS-RE80A Tube Rotator Mixer, 0-80 RPM includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

F1 Mass Standard - knob weights with adjustment chamber. Nominal value - 1 kg.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Thermo 75003614 Buckets for TX-750 Rotor The Thermo 75003614 Buckets are rectangular-shaped buckets  (more)designed to be used with the TX-750 Swing Bucket Rotor. They can hold up to 4 x 250ml tubes and are capable of a maximum speed of 4,500 RPM and a maximum RCF of 4,415 x g. These buckets are made from durable materials that are capable of withstanding high-speed centrifugation, making them suitable for high-throughput applications. Whether you're working in a research or clinical laboratory, these buckets are a reliable choice for your centrifugation needs. INCLUDED: The Thermo 75003614 Buckets for TX-750 Rotor includes: - Set of 4 Buckets - Full 6 Month Parts and Labor Warranty Thermo 75003614 Buckets for TX-750 Rotor SpecificationsMaximum Speed4,500 RPMMaximum RCF4,415 x gMaximum Capacity4 x 250mlMaximum Radius19.5 cmRotor CompatibilityTX-750 Swing Bucket RotorDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Polyscience AD15H200-A11B 15L Heated Circulator, Advanced Digital (Ambient +10 to 200C), 120V, 60Hz3 (more)D Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AD15H200-A11B 15L Heated Circulator is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Intuitive 3.75” (9.5 cm) display with touch-pad control 4 languages: French, German, Spanish, English Swivel 180™ Rotating Controller On-board connectivity: USB-A &amp; B, Ethernet, RS-232/RS-485 and external temperature probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AD15H200-A11B 15L Heated Circulator, Advanced Digital (Ambient +10 to 200C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Overhead Stirrer Visco Jet Impeller inoJET-80mm Particularly in the case of applications wi (more)th very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers! The particular shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. You can find out more about this here. The VISCO JET® 80 is ideal for vessels with the following characteristics: - ideal vessel diameter: 133- 200 mm - ideal ground clearance: 24 mm - ideal filling level: 133- 200 mm - ideal volume: 1,900 - 6,300 ml The VISCO JET® 80 is made of stainless steel. A stirrer shaft with a diameter of 10 mm is included in the scope of delivery. INCLUDED: The Heidolph Overhead Stirrer Visco Jet Impeller inoJET-80mm includes: - Operator's Guide - Full 3 Year Manufacturer's Warranty