Beckman GS-6R Benchtop Laboratory Centrifuge with 3750rpm Rotor Lab

This Sigma 3K18 Refrigerated Laboratory Centrifuge was removed from a university lab where it was su (more)rplus to requirements. The unit powers on and is in working order. There is no rotor, but we tested it without on a low speed. It is in reasonably good cosmetic condition with minor marks from use.

This Heraeus Biofuge 22R Centrifuge was removed from a university lab where it was surplus to requir (more)ements. The unit powers up but does not run. We removed the front panel to investigate and at least two relays are sparking quite badly. It is in good cosmetic condition with marks from use. It is sold for spares/repairs.

This Beckman Coulter Avanti J-E Centrifuge was removed from a university lab where it was surplus to (more) requirements. The unit powers up but we were unable to test it further as we do not have a compatible rotor in stock. We think it requires a rotor with a magnet fitted. It is in good cosmetic condition with minor marks.

Ohaus FC5515R Frontier Micro Centrifuge The Ohaus FC5515R Frontier Micro Centrifuge is a sophisticat (more)ed, high-performing lab device designed for liquid separation applications. With a sleek, compact design that saves valuable lab space, this micro centrifuge is engineered to provide smooth and dependable high-speed operation for critical lab applications, including DNA/RNA preparation, ultra-filtration, and more.The FC5515R's easy-to-use control panel with a rotary knob allows for simple operations. This includes setting and recalling speed and g-force, as well as controlling the temperature. Its intuitive interface allows for immediate accessibility and adjustment of key parameters, making it one of the most user-friendly centrifuges on the market.Propelling high performance is a powerful brushless induction motor along with 10 acceleration and deceleration settings. Moreover, a memory function for up to 99 commonly used parameters provides convenience and helps streamline the work process.The FC5515R has been designed with multiple safety features to protect against injury. The motorized lid-locking system prevents the centrifuge from opening during operation, and the rotor imbalance sensor stops the centrifuge if the rotors become imbalanced or sudden shock occurs. This acts as a safety measure, protecting the operator from high-speed spinning rotors.Moreover, bio-containment rotors facilitate research involving hazardous samples, thereby adding an extra level of safety and versatility.The Frontier Micro Centrifuge offers flexibility for varied centrifugation needs. It has a maximum capacity of 44 × 1.5/2 mL and 12 × 5 mL tubes, and it's the only centrifuge in its class compatible with 6 rotors (7 rotors for the 5515 model), including a PCR strip tube rotor. It's the most economical centrifuge on the market to include a unique 5 mL tube rotor. The centrifuge's signature snap-on rotor and lid locking system allow for quick and easy installation of rotors with just one press of a button.In conclusion, the Ohaus FC5515R Frontier Micro Centrifuge offers exceptional performance, versatility, safety, and user-friendliness. It's an excellent choice for labs requiring high-speed, reliable centrifugation.Click Here to View Product Video INCLUDED: The Ohaus FC5515R Frontier Micro Centrifuge includes: - Power Cord - Two Year Manufacturer's Warranty

Hersteller: Thermo Scientific Modell: Sorvall Legend Micro Pico 21 Kernmerkmale: - Leichte Bedienung (more) durch intuitive Bedienelemente, leicht abzulesende Displays und schnell mit einem Klick verriegelbarem Zentrifugendeckel - Schlankes, leichtes und platzsparendes Design - Langlebig und einfach zu reinigen und zu warten - Außergewöhnliche Beschleunigung von bis zu 21,000 x g in nur 12 Sekunden - Entspricht den aktuellsten Klinik- und Sicherheitsstandards und ist In-Vitro-Diagnostics (IVD)-konform gemäß 98/79/EC. Technische Daten: Fassungsvermögen: 24 x 1.5/2 mL Max. Geschwindigkeit:14,800 rpm Max. RZB: 21,100 x g Geräuschpegel: 56 dB(A) Temperaturbereich: Ambient temperature Zertifizierung/Konformität: CSA, CE, IVD Typ: Benchtop Centrifuge Beschreibung: Sorvall Legend Micro 21 Centrifuge, Ventilated Elektrische Anforderungen: 100 V 50/60 Hz Gekühlt: No Laufzeit: 1 to 99 min. (1 min. increments); HOLD Standards: IEC 61010-1, IEC 61010-2-020 (refer to manual for more details) Abmessungen (H x B x T): 8.9 x 9.6 x 13.8 in. (22.5 x 24.3 x 35.2 cm) Nettogewicht: 23.1lb. (10.5 kg) Produktlinie: Sorvall Frequenz: 50/60 Hz Lieferumfang: - Sorvall Legend Micro Pico 21 - Bedienungsanleitung als PDF via E-Mail Bei Bedarf eines passenden Roters, helfen wir gerne! Das Gerät befindet sich in einem absoluten Top Zustand und wurde 100%  auf Funktion geprüft.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

MYA Microbalances are very precise laboratory devices. They have unmatched repeatability values, the (more)ir readability is impressively high (from 1 µg), and their maximum capacity – very small (to 52 g). It is these three features that make MYA Microbalances excellent weighing devices for very small masses, used in research laboratories, including pharmaceutical, physical, chemical, biological and medical ones. Thanks to the best weighing parameters, the microbalances of this series will prove themselves in the most advanced laboratory processes. Why Choose MYA Microbalances in Particular? MYA Microbalances have the world’s lowest reading unit [d] 1 μg and the lowest minimum weight [USP] 0.82 mg. They are equipped with an automatic, draft-proof weighing chamber and have a fully automatic levelling system. Automatic levelling is more convenient than semi-automatic and manual ones, saves time, and, above all, guarantees model position of the measuring system and gives maximally precise measurement results. We offer a large selection of MYA Microbalance models, and thus a wide spectrum of readability and maximum capacity, which translates into a variety of applications for this series of balances. Do you need a balance that not only determines weight with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The BBP300 +4ºC & -35ºC combination refrigerator / freezer offers 2x 286 liters of safe and reliable (more) storage capacity. The inner fans with forced air circulation ensure superior temperature uniformity and fast temperature recovery. The upper chamber standard comes with a double layer glass door where the bottom compartment comes with a stainless steel door. Both chambers have their own independent cooling system, controller and power. The BBP300 is the combination blood & plasma system and comes with 2 x 3 stainless steel roll-out drawers and standard 2 chart recorders. Capacity: 2x 286 l Doors: upper -1 glass door (double layer), bottom – 1 stainless steel door for both parts Air circulation: forced air circulation by inner fan Defrost: fully automatic defrost cycle Temperature range: +4ºC upper part / -35ºC lower part Temperature precision: ± 0.5ºC Temperature stability: ± 1ºC Temperature uniformity: ± 2ºC Microprocessor: adjustable set-point, high alarm, low alarm, door alarm, 2 separate and independent (audible, visual and remote alarm) Chart recorder: 2x 7- day chart recorder, factory installed in top panel Cabinet material: stainless steel inside and outside Dimensions (WxDxH): 710 x 800 x 1985 mm Internal dimensions (WxDxH): 590 x 675 x 590 mm (x 2 compartments) Drawers (WxDxH): 490 x 610 x 150 mm Weight: 190 kg

Max speed: 13500 rpm Max volume: 1000 ml Max RCF: 17310 x g Admissible density: 1.2 kg/dm3 Admissibl (more)e kinetic energy: 4000 Nm Dimensions (WxDxH): 410 x 375 x 565 mm Weight: 33 kg Equipped with: Hermle 221.08 V01 swing out rotor (max 4500 rpm) 4x Insert with 7x 50 ml Falcon tubes capacity (max 3500 ml)