Beckman Coulter Optima Max-XP Ultracentrifuge with MLS 50 Rotor Lab

Biosafe Sepax S-100 Lab This item was removed from a university where it was surplus to requirement. (more) It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

This listing is for an Eppendorf 5415D Centrifuge The Centrifuge 5415 D is a non-refrigerated bench (more)-top centrifuge and is used in research and routine laboratories in the biosciences, industry, clinics and chemistry.With their space-saving design and user-friendly operating concept, these centrifuges are ideal for everyday routine tasks.The basic functions can be selected using the "SHORT" key and the "TIME" and "SPEED" dial. The values appear in the display in digital form.Power supply: 230 V / 50 – 60 Hz 120 V / 50 – 60 Hz see identification plate Power requirement: 180 W Max. rotational speed: 13,200 rpm Max. centrifugal force: 16,110 rcf Max. load: 24 x 2.0 ml Safe-Lock Micro Test Tubes or 36 x 0.5 ml tubes Max. kinetic energy: 3,100 Nm Max. density of material to be centrifuged: 1.2 g/ml Ambient temperature: 2 °C – 35 °C Max. relative humidity: 75 % Dimensions: Height:230 mm Depth: 310 mm Width: 230 mm Weight (without rotor): 8.5 kg Acceleration time (230 V): < 13 sec. Deceleration time: < 11 sec. Acceleration time (100 / 120 V): < 15 sec. Deceleration time: < 13 sec.

Hermle Z326K refrigerated centrifuge. Adjustable temperature from -20 ºC to 40 ºC with pre-cooling.  (more)Maximum speed (depending on rotor) 18,000 rpm/23542 xg. Maximum capacity 4*100 mL. Storage up to 99 programs. Timer up to 99 h 59 min or continuous. Low noise level <63 dB. Imbalance alarms and overspeed protection. Includes angular rotor with maximum speed of 6,000 rpm and capacity for 6 50 mL falcon-type tubes and adapters for 15 mL tubes. Dimensions: 400*700*360 mm; 60 kg. User manual. The Hermle Z326 K centrifuge is high-quality laboratory equipment with exceptional performance. This centrifuge is ideal for a wide range of sample separation and purification applications. In addition, it has an advanced cooling system that allows for quiet and efficient operation.

SCILOGEX EZee Mini-Centrifuge, Blue Lid, for 0.2/0.5/1.5/2.0mL Tubes &amp; PCR8 Strips Max. Speed 7 (more),000 RPM Max. Capacity 8 x 1.5/2.0ml micro-tubes Driving Motor DC Features - Available in two colors i.e., green, blue - Easy-to-use with dual start/stop function. - Maximum speed 7000rpm/2680xg - Supplied with an 8 place 1.5/2.0ml microtube rotor and 16 x PCR tube rotor &amp; 0.2/0.5ml tube adapters. - Compact design - Whisper quiet operation, noise level ≤ 45dB - Ideal for quick spin downs of microtubes and PCR tubes - Simply close the lid for acceleration and open the lid for deceleration or use the on/off switch. - Accelerates and brakes in seconds. - Universal voltage - Rotors change without tools. EZee mini centrifuges are ideal for microfiltration and quick spin downs from the walls and caps of microcentrifuge tubes. The compact design takes up less than six inches of bench space. Easy open clear colored lids are available in four colors. Simply close the lid for acceleration and open the lid for deceleration, or alternatively use the on/off switch. Click Here to View Product Video INCLUDED: The SCILOGEX EZee Mini-Centrifuge, Blue Lid, for 0.2/0.5/1.5/2.0mL Tubes &amp; PCR8 Strips includes: - 8 Place 1.5/2.0ml Microtube Rotor - 16 x PCR Tube Rotor - 0.2/0.5ml Tube Adapters - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z216 MK Refrigerated CentrifugeFeatures - Brushless induction drive - Microprocessor control  (more)- Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40°C) - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Max capacity: 6x 50 ml Allowed density: 1.2 kg/dm³ Speed: 18000 rpm Force: 25718 rcf Kinetic energy: (more) 8100 Nm Dimensions (WxDxH): 275 x 330 x 247 mm Weight: 11 kg Equipped with: 1x Hettich 1114 swing out rotor (max 5000 rpm) 8x Hettich 1122 bucket (tube capacity (ØxL): 17.5 x 53 mm)

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab This item was removed from  (more)a university where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).It has been professionally serviced, the report is available on request. It is in very good cosmetic condition internally and externally. This item includes the following: 3 x Shelves: 47 x 45 cm 1 x Humidity Water Tray: 44 x 25 x 7 cm

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315&rsquo;s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. Set Includes: 8 mass standards, 2 pairs of tweezers, 1 brush and 1 pair of gloves.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Ohaus PX84 Pioneer Analytical BalanceThe OhausPX84 Pioneer PX Analytical Balance combines essential  (more)weighing functionalitywith competitive performance, offering high accuracy and repeatability forapplications in laboratory, industrial and education settings with internalcalibration. The PX84 weighing plate has a maximum capacity of 82 gramswith a readability of 0.0001 grams and a weight stabilization time of 3 seconds.The PX84 is affordably priced, intuitively designed for intelligent operationwith a second line display for additional information, and USB and RS-232connectivity for easy communication. 82 gram weight capacity Readability (grams): 0.0001 Pan size (diameter): 90 mm Stabilization Time: 3 seconds Internal Calibration Model The PX offers high accuracy and repeatability for essential weighing applications in laboratory, industrial and education settings at an economical price point Featuring a cast metal lower housing, sub-pan and stainless steel weighing pan, the PX is durably constructed for versatile, long-term use The PX features a second line display for additional information or guidance Static removal bar for convenient grounding USB and RS-232 connectivity for easy communication Click Here to View Product Video INCLUDED: The Ohaus PX84 Pioneer Analytical Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Branson M2800H Mechanical Heated Ultrasonic CleanerFeatures - Sweep frequency eliminates standing wa (more)ves and creates consistent cavitation throughout the tank - 40 kHz rugged industrial transducers - Mechanical control located above and behind the cleaning tank in an easily accessible control tower panel and raised to avoid damage from cleaning solutions - Convenient built-in pour drains are featured on 0.5 and 0.75 gallon models, with tank drain valves incorporated on models 1.5 gallons and larger - Plastic body, chemical-resistant Easy to use mechanical timer for setting up to 60 minutes of operation, continous operation, as well as heating at 69°C/156.2°F Completely removes flux and contaminants from precision parts such as PC boards, SMDs, quartz crystals, capacitors, and many others Can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids Bransonic M and MH Series cleaners are known for offering a level of precision and reliability you have come to expect from Branson. M Series includes 60-minute mechanical timer and continuous operation. MH Series includes 60-minute mechanical timer and continuous operation with heating capability. Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change.Click Here to View Product Video INCLUDED: The Branson M2800H Mechanical Heated Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty