Beckman Allegra X-15R Refrigerated Centrifuge Gekühlte Zentrifuge 4x750ml (2015)

Heraeus Sorvall 75006444 5650rpm 2x500g Swinging Bucket Centrifuge Rotor Lab This was removed from a (more) university lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. No buckets are supplied. Maximum RPM: 5650. Maximum Load: 2 x 500g.

Hermle Z206-A Centrifuge w/ 6 x 50ml RotorFeatures - Microprocessor control - Active imbalance detec (more)tion and cut-off - One-hand closing - Emergency lid lock - Air cooling - autoclavable rotors - Diagnostic program - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion The Z206-A Compact Centrifuge is suitable for a variety of applications inside both the clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2ml to 50ml. A unique 6 x 50ml swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes. The advanced microprocessor controls feature an ergonomic turn knob that controls all settings (time, speed, accel/decel levels, etc.). The speed can be adjusted from 200 rpm up to a maximum speed of 6,000 rpm (corresponding to 4,427 xg) in the popular 50ml and 15ml rotors. The centrifuge lid features and automatic lid-lock that prevents it from being opened while the rotor is still in motion. In addition, a unique imbalance detection system is designed to automatically power down the motor in the event of improper loading of the rotor or any tube breakage. Compact, quiet, and versatile are just a few of the features found in the Z206-A centrifuge. Add to this, the proven safety features, and the result is the ideal centrifuge for a variety of clinical and molecular biology applications. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z206-A Centrifuge w/ 6 x 50ml Rotor includes: - 6 x 50ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Ohaus FC5917RF Frontier Multi-Pro Refrigerated Underbench Centrifuge w/ Selectable Rotor Speed Range (more) 200 to 16,010 RPM Maximum Capacity 4 x 1000ml Temperature Range -20°C to 40°C (-4°F to 104°F) Features - Automatic rotor identification makes switching between applications extremely easy - Simple one-hand operation enabled by the selection button/rotary knob combination—even with gloves on - Large backlit LCD display shows centrifugation settings and real-time parameters on one interface - Program storage up to 99 runs including parameter settings and rotor types - Maintenance-free induction drive - Thread-free rotor locking mechanism - Optimized airflow system to keep samples cool (non-refrigerated models) - Chemical and corrosion-resistant stainless-steel housing ensures durability in lab environments - Self-diagnostic program to record usage and error history for easy maintenance and to minimize downtime - Over-speed protection, immediately upon rotor insertion - Active imbalance-detection with individual imbalance tolerances set for each rotor - Motorized lid-locking system to protect operators from accidental injuries - Sealed and bio-containment rotors to safeguard operators from harmful aerosols Ohaus Frontier Multi-Pro centrifuges offer a high-speed centrifugation platform which can be tailored to fit your needs. The intuitive design of the centrifuges and accessories enables easy access to parameter settings and quick rotation between applications. The performance of these centrifuges is propelled by German engineering and high quality components for reliable use. Frontier 5000 Multi-Pro Centrifuges are designed for universal use in multiple applications in research, industrial, and clinical laboratories and can be combined with our range of rotors and accessories for customized use. Available in 11 models with capacities from 0.2 ml to 4 × 1000 ml - and feature high-speed performance at maximum volume, automatic rotor identification and safety features. The intuitive design of the centrifuges & accessories enable easy access to parameter settings, and quick rotation between applications. Features include automatic rotor recognition and backlit LCD. The performance of these centrifuges is propelled by German engineering, and high quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use. The Frontier 5000 Series is equipped with protective features, including automatic overspeed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety. Click Here to View Product Video INCLUDED: The Ohaus FC5917RF Frontier Multi-Pro Refrigerated Underbench Centrifuge w/ Selectable Rotor includes: - Selected Rotor - Power Cord - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

QUALITY LABORATORY CENTRIFUGES - OHAUS Ohaus designed this instrument to cover virtually all applica (more)tions in research, industrial and clinical laboratories. The bestselling FC5718, like the entire Frontier™ 5000 range, offers high speed performance for maximum volume, automatic rotor identification and next generation safety features. The best versatility - Large variety of compatible rotors and accessories (19 optional rotors and 121 accessories) - Microliter to 4x100ml capacities (including PCR strips and microliter plates) - High-speed centrifugation for tubes from 0.2ml up to 85ml - Available in the version with refrigeration system and variable temperature from -20°C to 40°C The best usability - Automatic recognition of the rotor in seconds - No risk of damaging the centrifuge even if used by less experienced personnel - Easy-to-read LCD control panel; two-line display and real-time information - Ergonomic adjustment knob for easy parameter setting - Ability to set and view the speed in both rpm and RCF - 99 sets of storable parameters More security - Double imbalance sensor: two separate sensors designed to detect high and low vibrations, caused by imbalances; computerized detection system with dedicated unbalance parameters for each rotor - Motorized locking system for the centrifuge lid - Overspeed protection automatically activated upon rotor installation - Better protection for both equipment and personnel You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. Applications Separation, sample preparation, cell pelletization, protein separation, nucleic acid separation, cell concentration, chemical separation, diagnostics, environmental sample preparation, blood sample processing Screen Backlit Liquid Crystal Display (LCD) Materials Corrosion resistant stainless steel chamber with polycarbonate / ABS plastic lid Additional features Ten speeds of acceleration and deceleration, selection of run time from 10s to 99h 59min or continuous, CFC-free refrigeration system (refrigerated models), sample temperature (refrigerated models), lid lock system, overspeed protection, detection double imbalance TECHNICAL FEATURES - Speed ​​range from 200 rpm to 18,000 rpm - Maximum relative centrifugal force (xg) 23,542 g - Maximum capacity (rotor) 4 x 100 ml - Program memories 99 - Acceleration gear 10 - Deceleration gear 10 COMPATIBLE ROTORS: Angle 4 x 85ml ID RB Hi. Angle 12 x 15ml RB / FA ID. Angle 24 x 1.5 / 2.0ml ID Sealable. Angle 6 x 50ml RB ID Hi. Swing out 4 x 100ml ID. Angle 12 x 1.5 / 2.0ml ID. 4 x 8W PCR Strip ID Corner. Angle 44 x 1.5 / 2.0ml ID. Swing out 4 x 100ml ID sealable. Angle 6 x 85ml ID RB. Angle 24 x 1.5 / 2.0ml ID. Angle 6 x 85ml RB ID Hi. Angle 30 x 15 ml RB / FA ID. Angle 30 x 1.5 / 2.0ml ID Sealable. Angle 10 x 50 ml FA ID. Angle 64 x 0.5ml ID. Angle 20 x 10ml ID RB Hi. Angle 6 x 50ml RB / FA ID. Swing out 2 x 3MTP ID.

SL-180 Rotor for AWEL Industries Centrifuge AWEL SL-180 Swinging Bucket Rotor 4 x 180ml Maximum spee (more)d: 4500 rpm With 4 N-200 buckets With 4 adapters for 7 x 5/7ml tubes reference 30000020

This Boxer 200/100 L Laboratory Autoclave was removed from a university lab where it was surplus to  (more)requirements. The client had informed us that the unit is in 100% working order and has had little use. It has now been professionally serviced and has been confirmed to be in full working order. It has passed all safety checks. Full report available on request. The internal chamber is 39cm (L)x 59cm (W)x 39cm (H). The unit is in very good condition with very few marks.

Jeol JEM-1200 EX Pump and Pressure Tank This was removed from a university lab where it was surplus  (more)to requirements. The unit has not been tested. It is in good cosmetic condition with marks from use.

Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul Volume Range 100-1000ul Adjustable or Fixed (more) Volume Adjustable Volume Accuracy (±%) 0.60/0.70/2.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. Set Includes: 13 mass standards, 2 pairs of tweezers, 2 brushes and 1 pair of gloves.

Capacity: 520 g Repeatability: 0.001 g Linearity: 0.002 g Weighing pan: ∅ 120 mm Dimensions (DxWxH): (more) 290 x 193 x 331 mm Weight: 4 kg Balance has a small glass chip in the draft door (see photo), this is however purely cosmetic and does not influence the operation.