Baxter Dade Immufuge II Centrifuge

This listing is for a D3024R Refrigerated Micro-CentrifugeFeatures:User-friendly large LCD display p (more)rovides all visual informationQuiet and stable operation benefit lab environmentBrushless motor drives quickly and effortlessly accelerates the rotor to set speedFully autoclavable Bio-safe rotorDual door interlock design, more safeGently braking at low speed, better separationSpecifications:Max. Speed: 15000rpm (200-15000rpm), increment: 10rpmMax. RCF: 21380—g, increment: 10—gRotor: 1.5/2mlx24 (included), 0.2/0.5mlx36 (supplied separately), 5ml round bottom x18 (supplied separately), 5ml eppendorf x12 (supplied separately), PCR8x4 serial tubes (supplied separately)Run Time: 30sec~99min~HOLD (Continuous operation)Driving Motor: Brushless motorAdditional Features: Speed/Acceleration switch; Short-time run function; sound-alert functionSafety Devices: Dual door interlock, Over-speed detector, Over-temperature detectorAutomatic internal diagnosisTemperature Range (D3024R): -20 °C to +40 °C

Centrifuge IEC CL30 THERMO THERMO ELECTRON CL 30 benchtop centrifuge Max. Speed: 6500rpm with fixed  (more)rotor and 4100rpm with bucket rotor Max. capacity: 6 x 50ml with fixed rotor and 4 x 280ml with bucket rotor Non-refrigerated Voltage: 230V / 50/60Hz Net weight: 60kg Dimensions: 50 x 40 x 37cm With T41 swing bucket rotor Attention, only 2 buckets and no adapters (see photos) Year of manufacture: 2006

Hermle Z216 M Centrifuge w/ 44 Place RotorFeatures - Brushless induction drive - Microprocessor cont (more)rol - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ 44 Place Rotor includes: - 44 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Compact Centrifuge with Combination RotorFeatures - Microprocessor with large LCD display - E (more)lectrical lid lock - Quick access to samples - Active imbalance identifi cation and cut-off - Air Cooling System - Quick Acceleration and Deceleration - Noise level < 60 dBA, at max. speed - Easy removal of rotor, without tools - Manufactured in accordance to International - Safety Regulations, i.e. IEC 61010 The Z207-A-CMB includes a convenient combination rotor that holds 4 x 15 ml and 4 x 50 ml tubes in the same rotor. With the combination rotor there's no longer a need switch rotors, or use adapters to centrifuge 15 ml and 50 ml tubes for tissue culture. You can even process them simultaneously! Along with the unique combination rotor, the Z207-A-CMB features the unique EZ-Scroll™ touch pad which gives you ease of control and a modern feel. An advanced microprocessor control allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust accel/decel rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally the Z207-A-CMB features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily. INCLUDED: The Hermle Compact Centrifuge with Combination Rotor includes: - Combination Rotor - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Wherever high readability and precision are important. Wherever good repeatability in harsh industri (more)al conditions matters. Waterproof steel platforms are the ideal solution for any type of industry. Use the potential Our platforms can work with one of four weighing terminals to choose from: PUE 7.1, PUE HX7, PUE HY10, PUE 5. They have four load cells, which means that no matter where you put the goods on the pan, the measurement result will always be the same. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. It is not intimidated by contact with moist objects or accidental splashes. The entire construction made of stainless steel translates into a high degree of protection for these platforms: IP 68.

Eppendorf 4 x 7 Vacutainer Adapters, Cat. # 022639242 New in box Eppendorf 4 x 7 Vacutainer Adapters (more), Cat. # 022639242 for the A-4-38 rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 4 x 7 Vacutainer Adapters, Cat. # 022637242 are used in the Eppendorf 5702/R Centrifuge. INCLUDED: The Eppendorf 4 x 7 Vacutainer Adapters, Cat. # 022639242 includes: - Full 6 Month Parts and Labor Warranty

Can be operated with one hand Internal Buffer Detection Automatic/Manual Temperature Compensation In (more) Autolock mode, stable readings are held on the display mV – accuracy: ±0.1% ±1 digit mV – resolution: 1 pH – calibration: 1, 2 or 3 points pH – Accuracy: ±0.1% ±2 Digit Temperature Accuracy (°C): ±0.3 ±2 digits Temperature resolution (°C): 0.1 Memory – Logging Function: No