Angular rotor for Hettich 1015 centrifuge

Magfuge HEATHROW Centrifuge / Magnetic Stirrer - Gray / Purple New equipment in its original packagi (more)ng 3L centrifuge and magnetic stirrer in one device Part Number: 120581 Dimensions: 23.5 x 18.5 x 12 cm Ambient conditions: Use temperature: 2 to 40°C Weight: 1.85 kg Color: Gray / Purple Stirrer detail: ø plate: 130 mm Stirring capacity: 3 l Speed: 50-999 rpm (increment of 1); 1000-2500 rpm (increment of 5) Timer: Stirring mode -> 30 seconds to 60 minutes or continuous (5 second increment) Oscillation mode -> 1 second to 60 minutes or continuous Oscillation mode -> 30 seconds to 15 minutes Centrifuge detail: Rotor 12 tubes 1.5/2ml or rotor 6 tubes 5ml Speed: 500-999 rpm(increment of 1); 1000-5000 rpm (increment of 5); 5000-12500 rpm (increment of 25) Timer: 30 seconds to 30 minutes (5 second increment) Delivered with : a rotor for magnetic stirring 1 rotor for 12 tubes of 1.5/2 ml 1 rotor for 6 tubes of 5 ml 12 adapters for 0.2 ml tubes 12 adapters for 0.5 ml tubes 2 PTFE magnetic bars 40 x 12 mm 2 silicone mats suitable for the magnetic stirring lid AC adapter

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and runs well to 6000rpm. It also cools and incubates as it should. It is in good cosmetic condition with minor marks. It is supplied with;MSE Rotor 43124-141SN - 7962Max RPM - 6000 4 x Buckets4 x Beige Adaptors hold 1 x 50ml tube each

Sorvall Discovery 90 SE Floor-Standing Centrifuge Lab This item was removed from a university where  (more)it was surplus to requirement. It is in good cosmetic condition and powers on, it has been tested at 70,000rpm using a Beckman 70.1Ti rotor. The rotor is not included.

Eppendorf 5427R Refrigerated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor The Eppendorf 5427R Refrige (more)rated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor stands out when it comes to meeting the demand for high sample throughput, unlike many other centrifuges that struggle with capacity limitations. This centrifuge boasts increased workloads, delivering rapid run times with unwavering reliability. What sets this centrifuge apart is its user-friendly design and intuitive interface, ensuring a comfortable and straightforward user experience allowing easy adjustments within the speed range of 100 to 16,220 RPM. Consequently, the 5427R emerges as the perfect solution for advanced research needs. Moreover, it incorporates innovative compressor technology that takes ecological considerations into account. This technology allows for precise temperature control from Ambient -11°C to +40°C, safeguarding sensitive samples and ensuring their optimal preparation for analysis. The 5427R also offers a wide range of high-quality aluminum rotors tailored to specific applications. In addition to established rotor types, it introduces specially designed models to cater to diverse research requirements.The included FA-45-30-11 Fixed Angle Rotor reaches a maximum speed of 14,000 RPM and maximum RCF of 20,817 x g. INCLUDED: The Eppendorf 5427R Refrigerated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor includes: - FA-45-30-11 Fixed Angle Rotor with Aerosol Lid - Rotor Wrench - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5427R Refrigerated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor SpecificationsMaximum Speed16,220 RPM (14,000 RPM with included rotor)Minimum Speed100 RPMMaximum RCF25,001 x g (20,817 x with included rotor)Maximum Capacity48 x 1.5/2.0 ml (30 x 1.5/2.0ml with included rotor)Temperature Range-11°C to +40°CTimer10 seconds to 9:59 hours, with continuous runAcceleration Time22 secondsDeceleration Time19 secondsNoise Level< 56 dB(A)Dimensions (W x D x H)12.6 x 21.3 x 10 in. (31.9 x 54 x 25.4 cm)Weight66.1 lb. (30 kg)Electrical Requirements120V, 50/60Hz, 4.6A, 550WComparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

This listing is for a Infors HT Minitron Shaking Incubator.The unit is in full working condition and (more) is ready for immediate release.The Infors HT Minitron is a versatile incubator shaker that excels in various cell cultivation applications, making it an excellent option for laboratories with limited space. Let’s dive into its features, applications, and benefits:Key Features:Compact Dimensions: With sizes of 800 x 625 x 700 mm for a single unit and 800 x 625 x 1,490 mm for a double-stacked unit, the Minitron is designed for tight lab spaces without sacrificing functionality.Shaking Throw: It offers a choice of 25 mm or 50 mm shaking throws, catering to diverse flask sizes and ensuring optimal mixing conditions for different applications.High Shaking Speeds: Capable of reaching speeds up to 400 rpm, it provides efficient agitation, which is essential for uniform cell suspension and optimal growth conditions.Precise CO2 Control: The incubator can maintain CO2 levels up to 20%, crucial for cultivating mammalian and insect cells that require specific atmospheric conditions.Humidity Control: With humidity levels adjustable up to 80%, it supports the needs of sensitive cell types by preventing evaporation during incubation.User-Friendly Design: The Minitron features an easy-to-clean design and simple controls, making it accessible for all users while minimizing maintenance effort.Applications:The Infors HT Minitron is suitable for a range of applications, including:Cell Culture and Microbial Fermentation: Ideal for both standard microorganisms and more complex cell systems.Bio-process Development: Facilitates optimization processes for various biological systems.Research and Development: Supports a wide array of life sciences and biotechnology projects, enhancing experimental accuracy and efficiency.Benefits:Space-Efficient: The compact design makes it perfect for small labs, allowing researchers to maximize their workspace without compromising equipment capabilities.High Performance: The combination of high shaking speeds and precise environmental control enables rigorous experimental conditions tailored to specific cell culture needs.Operational Ease: The user-friendly features and easy-to-clean design ensure that the incubator remains a practical choice for daily lab operations.

Assorted Pipette Tips Storage Boxes Lab This item was removed from a university lab where it was sur (more)plus to requirements. All items vary in condition with minor surface damage and pen marks present.

Cepa Z-41 High Speed Centrifuge This was removed from a university lab where it was surplus to requi (more)rements. The unit powers up and is in working order. It runs on a timer delay so takes a few moments to start working. It is in good cosmetic condition.

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).