Piramoon Technologies FiberLite F15-6x100 15,000rpm 24,700g Centrifuge Rotor Lab

This item has just arrived in our stock. Please enquire for further details.

Brandnew. Excellent condition - Excellent price. 12 months warranty. Delivery Scope: - 100x Base pla (more)tform - 100x Microscope slide - 100x Filter card 9,5 mm - 100x Filter card 12,5 mm - 100 x Insert - 100x 2.2ml PP tube with a lid Tested suspension types: - Natural biological fluids such as cerebrospinal fluid, body cavity fluids, synovial fluid, discharges, pus, etc. - Suspensions in isotonic smear solutions, tissue puncture specimen, expectorations, bronchial washings, etc. Features and benefits: - Obtaining of an equal cellular preparate and supernatant from the same sample of tested biological suspension. - Obtaining of specimen (cytospin) by way of filtering the supernatant onto a filtering paper. - Rapid placement of cells on a microscope slide by centrifugal metod with permeation of supernatant onto a filtering paper. - Possibility of supernatant recover on a microscope slide by automatic drain off into a test tube. - Prevention of aerosoling by securing fluid escape into the centrifugal chamber. - Avoidance of infections by application of single-use inserts.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This item has just arrived in our stock. Please enquire for further details.

Benchmark BSH5001-1B myBlock l- digital dry bath with 1 Quick-Flip blocks (BSWCMB) for tubes (0.2 to (more) 2.0ml, PCR strips and PCR plates, 115VBenchmark’s myBlock series is a “next generation” product line that introduces several major advantages over traditional dry baths. They are the first digital dry baths to include advanced microprocessor controls, timed or continuous operation and a removable hinged lid. In addition, an optional external temperature feedback probe can be positioned directly inside a sample tube, providing real-time control and monitoring of actual sample temperature.The myBlock’s transparent lid helps to promote better uniformity and minimize temperature stratification in the block by maintaining a warm air jacket layer. It also helps to reduce energy consumption by minimizing heat loss to the environment. The hinged lid can be flipped open (to the rear), or easily removed (lifted off). Both the single and dual block models can be ordered in a configuration that includes our unique Quick-Flip™ blocks. These universal blocks accept tubes from 0.5 to 2.0ml and, with just a quick flip to the other side, accomodate 0.2ml tubes, PCR strips or (in the dual block model only) a PCR plate. Other blocks are available for tubes up to 50ml. Click Here to View Product Video INCLUDED: The Benchmark BSH5001-1B myBlock l- digital dry bath with 1 Quick-Flip blocks (BSWCMB) for tubes (0.2 to 2.0ml, PCR strips and PCR plates, 115V includes: - BSH5001 myBlock l Dry Bath - BSWCMB Quick-Flip Block for 0.2 to 2.0ml tubes, PCR strips, and PCR plates - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards T-Station 85H Dry Turbo Station - ISO63 200-240V Ultimate Pressure <5 x 10-8 mbar Inlet C (more)onnection DN 63 ISO-K Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines the nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1. The T-Station 85 comes with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. This is combined with the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, making the T-Station 85 is ideal for general laboratory needs.INCLUDED: The Edwards T-Station 85H Dry Turbo Station - ISO63 200-240V includes: - Power Cord - One Year Manufacturer's Warranty

Hermle Z216 M Centrifuge w/ 44 Place RotorFeatures - Brushless induction drive - Microprocessor cont (more)rol - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ 44 Place Rotor includes: - 44 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

F2 Mass Standard - knob weights with adjustment chamber - set (1 mg - 200 g), plastic box Number of  (more)pieces in the set: 23 Weights 1 g i 2 g – solid masses without adjusting chamber