Piramoon Technologies F15-6x100 FiberLite 15,000rpm 24,700g Centrifuge Rotor Lab

Sorvall TH-641 Swinging Bucket Rotor 41,000 Max RPM with 4 x Buckets Lab This item was removed from  (more)a university where it was surplus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility. This item features 4 Sorvall buckets, therefore it is missing 2 of the required buckets.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Eppendorf A-2-DWP-AT Microplate Rotor & Buckets The Eppendorf A-2-DWP-AT Microplate Rotor &  (more)Buckets features two deepwell-plate buckets, which can each hold up to two plates for simultaneous processing of up to 192 samples. Reaches speeds of 4,500 RPM with a max RCF of 3,486 x g. This rotor can accommodate MTP, DWP, or filtration plate kits. The A-2-DWP-AT can only be used with Eppendorf centrifuge models 5810, or 5810R. INCLUDED: The Eppendorf Swing Bucket A-4-38 Rotor includes: - 2 Deep Well Plate Buckets - Full 1 Year Parts and Labor Warranty Eppendorf A-2-DWP-AT Microplate Rotor & Buckets SpecificationsMax Rotational Speed4,500 rpmMax RCF3,486 x gMax Capacity2 x 6 MTP; 2 x 2 DWP; 2 x 1 filtration plate kitsAutoclavable121°C for 20 minutesCompatibilityEppendorf 5810, and 5810R

Technical features Flow rate 0.2-1.3 l / min Suction (max.) 3 mWg Operating pressure (max.) 4 bar (r (more)el.) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 8 mm internal diameter tube. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

F1 Mass Standard - knob weights. Nominal value - 50 kg.

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Scilogex MicroPette Plus Autoclavable Pipettor, 0.5-10ul Volume Range 0.5-10uL Adjustable or Fixed V (more)olume Adjustable Volume Accuracy (±%) 1.00/1.50/2.50 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 0.5-10ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Temperature range: 2°C to 15°C Capacitiy: 104 L Dimensions (WxDxH): 595 x 640 x 1001 mm Weight: 43 k (more)g Explosion proof