Kendro Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor Lab Spares/Repair NOTE - THIS IS A SPARES/REPAIRS ITEM

The Frontier™ 5000 Series FC5707-K Kit is a reliable, compact, low-speed multifunction centrifuge id (more)eal for general laboratory applications. The included rotor standard options can process both round and conical bottom tubes (including common blood tubes) and can be easily retrofitted with accessories to process smaller tubes. Included in the FC5707-K model you will have the angular rotor with a maximum capacity of 8 x 15 ml. Features: Maximum relative centrifugal force (x g) at 4.445 g; maximum speed 6,800 rpm; tube diameter without adapter 18mm / 15ml, 1.5ml; outer/inner radius 86 mm; angle 32°. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. ELEGANT AND PRACTICAL DESIGN Compact design saves bench space: By packing all of its functionality into a small footprint, the FC5707 saves bench space in the laboratory. STRUCTURE AND FUNCTIONALITY Modern touch-wheel control and elegant waterproof interface: Designed for ease of use, the FC5707 features a convenient control on a waterproof user interface, which allows effective operation, even when gloves are worn. Simple and flexible operation for a wide range of applications: 8 x 15 mL angular rotor accommodates round bottom tubes or conical bottom tubes (only 4 conical bottom), including common blood tubes. Additionally, it can also be easily adapted with accessories to accommodate smaller tubes such as 7.5 and 1.5/2ml. TECHNICAL FEATURES Speed ​​range: 200 rpm – 6.800 rpm Maximum relative centrifugal force: 4.445 g Maximum flow rate (rotor): 8 x 15 ml Program memories: 99 Rotor Packaging: Angled Rotor: Rotore Angolare 8 x 15ml Acceleration gear: 10 Deceleration gear: 10 Lid lock: mechanical Noise level: ≤60 ± 2 dB (A) Rotor Compatibility: Angled 8 x 15 ml Rotor recognition method: manual Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous Safety certification: CE; FCC

Heraeus Sorvall 75006444 5650rpm 2x500g Swinging Bucket Centrifuge Rotor Lab This was removed from a (more) university lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. No buckets are supplied. Maximum RPM: 5650. Maximum Load: 2 x 500g.

4 adapters 3x15ml for SIGMA 13104 / 13117 buckets For SIGMA laboratory centrifuge with rotor 11133 F (more)or 4 x 3 Falcon tubes of 15ml

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-37666 Perkin Elmer AutoSystem XL GC ITEM-37678 Pulsar Extreme 3000 Mge Ups SystemsITEM-37681 Pulsar Extreme 3000 Mge Ups Systems ITEM-37675 Edwards Plate Degasser PD3ITEM-37699 482 CO-OximeterITEM-37740 Biotage Flashmaster Personal Chromatography Stand System ITEM-37741 Barnstead STEM Cat No. RS 10 PSU ITEM-37742 Matrix Technologies Memowell ITEM-37746 Type R1 Water bath without top unit ITEM-37749 Olympus Tokyo 200481 MicroscopeITEM-37751 BERTHOLD TECHNOLOGIES - CentroPRO LB 962 ITEM-37752 Shimadzu Sipper Unit 160L Type L ITEM-37754 TTI 1604 40,000 count digital Multimeter ITEM-37757 Bio Rad CriterionITEM-37758 Farnell Instruments Stabilised Power Supply ITEM-37759 DaRo UV systems ITEM-37761 Sartius Tandem Model 1082 ITEM-37762 Rodwell Revotherm Hotplate Magnetic Stirrer ITEM-37763 Gallenkamp Ultraviolet LampITEM-37765 IKA RCT Classic ITEM-38559 Wessington Cryogenics DF Series Dewar ITEM-37598 Alcatel 2008A Rotary Vane Vacuum Pump ITEM-37785 CTC analytics CTD-A200S AutosamplerITEM-37786 Finnigan Mat GCQ Used Spare Parts

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unparalleled functionality in a line of high performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Animal / Dynamic Weighing, Filling, Totalization / Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC, Statistics Screen 5.7 '' (145 mm) color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232 / Ethernet (accessories sold separately). GLP / GMP data output with real time clock. Construction Metal base, ABS top housing, stainless steel deck, front illuminated level indicator, weigh below hook, safety bracket , calibration lock, 4 touchless sensors, coverage in use Characteristics of the project Selectable environmental filters, auto tare, user selectable range calibration points, software lock and reset menu, user selectable communication settings and data print options, user definable project and user ID, standby automatic, up to 14 operating languages For further information and technical characteristics, download the attached data sheet.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

Character communication protocol is designed for communication between RADWAG balance and external d (more)evice via RS232, Ethernet or Wi-Fi* interfaces. The protocol consists of commands sent from the external device to the balance and responses sent from the balance to the device. Responses are sent from the balance each time a command is received as a response to the command. The commands that make up the communication protocol allow you to obtain information about the status of the balance and ways to influence its operation, for example, they allow you to receive weighing results from the balance, control the display, etc.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

Edwards E2M18 Vacuum Pump, Cat. #: A36324904 The EM range of oil‑sealed rotary pumps – renowned for  (more)their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor. Please Note: THIS PUMP WILL NOT OPERATE AT 120V or 230V AND IS USUALLY HARDWIRED TO A MASS SPECTROMETER SYSTEM. This pump operates at 100-110V/200-220V and 50/60Hz.Click Here to View Product Video INCLUDED: The Edwards E2M18 Vacuum Pump, Cat. #: A36324904 includes: - 1 Liter of Edwards Ultragrade 19 Oil - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty