Hermle Adapter pack for 1.5/2.0ml tubes in Z207-A rotors, 2/pk.

The Frontier™ 5000 Multi Series centrifuges are multifunctional, compact, low speed centrifuges and  (more)ideal for general laboratory applications. The included rotor standard options can process both round and conical bottom tubes (including common blood tubes) and can be easily retrofitted with accessories to process smaller tubes. Included in the FC5706-K model you will have the angular rotor with a maximum capacity of 12 x 15 ml. Features: Maximum relative centrifugal force (x g) at 4.427 g; maximum speed 6,000 rpm; tube diameter without adapter 18 mm / 15 ml; outer/inner radius 110 mm; angle 32°. HOW DOES A LABORATORY CENTRIFUGE WORK? A careful explanation with the Ohaus FC5706 model. Video presentation of the Frontier 5000 Multi centrifuges. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. COMFORT Designed for comfortable use, Frontier™ Multi centrifuges feature convenient control on an intuitive interface, allowing for responsive operation even when wearing gloves. VERSATILE Frontier™ Multi centrifuges can accommodate standard 50 and 15 mL tubes, including common blood tubes. When used with accessories, the rotors can be adapted for sizes up to 1.5ml. SAVE SPACE Frontier™ Multi centrifuges save valuable bench space by integrating all of their functionality into a small footprint. TECHNICAL FEATURES Speed ​​range: 200 rpm – 6.000 rpm. Maximum relative centrifugal force: 4.427 g. Program memories: 99. Acceleration gear: 10. Deceleration gear: 10. Lid lock: by motor. Noise level: ≤60 ± 2 dB (A). Rotor Compatibility: Angled 12 x 15ml; Angled 6 x 50ml; Oscillating rotor 6 x 5 ml. Rotor recognition method: manual. Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous. Safety certification: CE; FCC.

Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up but shows error 21 - wiring fault. It is sold for spares/repairs. A 4600rpm rotor is included.

Beckman Centrifuge Rotor SW-28 28,000rpm This was removed from a university lab where it was surplu (more)s to requirements. It is in good cosmetic condition with minor marks. Beckman SW-28 28,000 rpm Serial No. 05U 10874Six Beckman swing buckets SW 28 38.5ml

Eppendorf A-4-81 Swing Bucket Rotor with Buckets for 5810/R, Cat # 022638602 Eppendorf A-4-81 Swing  (more)Bucket Rotor with Buckets for 5810/R, Cat # 022638602, never used in box. The Eppendorf A-4-81 Swing Bucket Rotor with Buckets (not including adapters), Cat # 022638602 is used in the Eppendorf 5810 and 5810R Benchtop Centrifuges. INCLUDED: The Eppendorf A-4-81 Swing Bucket Rotor with Buckets for 5810/R, Cat # 022638602 includes: - 4 Rectangular Buckets - Full 1 Year Parts and Labor Warranty Eppendorf A-4-81 Rotor SpecificationsMax Speed5,000 RPMMax RCF4,500 x gMax Capacity4 x 750mL 28 x 50mL 56 x 15mL

CABINET CS 120 BASIC - CHEMISAFE - Made entirely of electro-galvanized steel sheet (Skin passat) FE  (more)P01, thickness 10/10 mm, cold pressed and painted, after degreasing treatment, with a first application of epoxy primer and with 2 subsequent applications of thermosetting powders and subsequent passage in a thermal tunnel at 200°C - “Monolithic” type constructions with feet at the base for leveling the cabinets - Double-paneled and reversible doors made of the same materials, complete with handles with safety locks and locks - Activated charcoal filter (optional) mounted on top, suitable for acid substances, with prefilter. Easy replacement of the filter behind a hinged panel with key lock - Handles with lock and key - Tray-shaped steel shelves with a thickness of 10/10 mm for the eventual containment of liquids in case of breakage or spread from the containers. Height adjustable - 110° opening that allows the shelves to be extracted without having to tilt them - Multilingual safety signs indicate the presence of dangerous and toxic products to highlight the contents and storage limits - Standardized pictograms according to ISO 3864 standards - Closure with safety lock and key - Compliant with EN61010-1 standards; EN16121 and CEI 66-5 Supplied: - 3 plasticized shelves (max load 80 Kg evenly distributed) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

Waters Source Ion Guide A Part Number 700004952 This was removed from a university lab where it was  (more)surplus to requirements. The unit is boxed but not sealed. We are unsure if it has been used. It comes boxed with a Certificate of Conformity

Huber Pilot One Ministat 230 Refrigerated Heating Bath Circulator This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

PUE-7-36 wall-mounting kit has been designed to facilitate installation of PUE 7.1 and PUE C32 termi (more)nals on a vertical surface. The kit enables adjustment of the terminal tilt. Intended use: Easy installation of PUE 7.1 terminal on a vertical and horizontal surface, adjustable tilt angle, Easy installation of PUE C32 terminal on a vertical and horizontal surface, adjustable tilt angle.

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW