Digtor 22

MSE Mistral 3000i Benchtop Centrifuge This was removed from a university lab where it was surplus to (more) requirements. Although the unit is in good cosmetic condition and powers on, it is unable to run a cycle or reduce temperature. Additionally included: 1 x MSE RotorModel BS4402 7 x Swinging Buckets:Volume: 250ml Bucket Adaptors: 6 x BlueHolds: 12x 5ml Vials 7 x GreyHolds: 4 x 12ml Vials 8 x MSE BrownHolds: 1 x 100ml VIals 1 x Hex Key Locking Bar

This Sanyo MSE Mistral 2000R Refrigerated Benchtop Centrifuge was removed from a university lab wher (more)e it was surplus to requirements. The unit has been tested and is in working order. The RPM could be set up to 6500 but the rotor would only run up to 4500rpm. It was tested with a digital thermometer (not included).When the temperature was set to 4˚c, the thermometer read 5˚cWhen the temperature was set to -4˚c (minimum) the thermometer read -5˚c There is a Rotor inside with 4 x Buckets and 2 x Yellow 50ml Adaptors. It is in reasonably good cosmetic condition but has some minor marks from use.

This Sigma 1-15K Refrigerated Benchtop Centrifuge was removed from a university lab where it was sur (more)plus to requirements. The unit has been recertified by a service engineer. It is in full working order. It has had a new gas strut fitted, but the lid can get stuck. Once it is opened it will repeatedly open, but when left for an amount of time it can get stuck again. It is in excellent cosmetic condition with some minor marks from use.

Sorvall Legend T Benchtop Centrifuge with 4600rpm Rotor This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition with marks from use. Included are; 1x Sorvall RotorP/N: 75006445S/N: 002518 4x Sorvall swinging bucket Heraeus AdaptorsP/N: 75006449

MARSHALL Select MS-CE4000 Benchtop Centrifuge, 4,000 RPM Maximum Speed 4,000 RPM Maximum RCF 2,250  (more)x g Maximum Capacity 6 x 50ml Features - Steel body construction with a plastic-sprayed surface for durability and aesthetic appeal - Low noise operation at less than 65 dB(A) ensures a quiet laboratory environment - Features a low temperature rise during use, preserving sample integrity - Equipped with a maintenance-free DC brushless motor for reliable and smooth operation - Microprocessor control with door cover protection enhances safety - Alarm monitoring function for real-time tracking of lock and motor status - User-friendly interface facilitates intuitive setup and operation - Real-time display of centrifugal force and operational parameters - Push-button programming and digital tube display for easy operation and monitoring - Supports various fixed-angle rotors to accommodate different testing needs - Compact dimensions make this centrifuge ideal for benchtop use The MARSHALL Select MS-CE4000 Benchtop Centrifuge is designed for optimal performance and durability, achieving a maximum speed of 4,000 RPM and an RCF of 2,250 x g. Its capacity to handle up to 6 x 50 ml tubes makes it suitable for a range of laboratory applications, from biochemistry to pharmacy. The centrifuge features a robust steel body with a plastic-sprayed surface, combining strength with an aesthetically pleasing appearance. It operates quietly with a noise level below 65 dB(A) and maintains a low temperature rise during operation, ensuring sample integrity. Equipped with a maintenance-free DC brushless motor and microprocessor control, the MS-CE4000 ensures smooth and reliable operation. The unit's safety is enhanced with door cover protection and an alarm monitoring system that keeps track of the lock and motor status. Its user-friendly interface includes push-button programming, a digital tube display for real-time parameter monitoring, and the ability to set and view centrifugal speed and time. The centrifuge is versatile, supporting various fixed-angle rotors to meet different experimental needs. With its compact dimensions (17.7 x 14.6 x 11 inches), this centrifuge is an excellent choice for laboratories seeking a reliable, multi-functional device. INCLUDED: The MARSHALL Select MS-CE4000 Benchtop Centrifuge, 4,000 RPM includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

BRIX REFRACTOMETER - For food and beverages Ideal for fast and automatic sugar determination of almo (more)st all food and beverage samples. It can be used both in laboratories, for quality control, and on agricultural fields, vineyards, orchards or near the production line. Designed with a full Brix range (0.0 to 95.0°Brix). Fields of use MyBrix can be used to determine the optimal harvest time of fruits and vegetables, to carry out incoming goods controls, or for quality control in juice, wine, soft drinks and food production. Measurements in seconds and accurate MyBrix measures the refractive index and sugar content instantly and precisely: the results are processed in just 2 seconds in the desired scale. Results are subject to automatic temperature compensation and are converted to up to 3 of 10 built-in sugar content scales, including Brix, Oechsle, Baumé and more. Extremely compact The MyBrix pocket refractometer is compact, lightweight and designed to fit comfortably in the hand and withstand rain and humid environments. Resistant and solid With its weather resistant design (IP65 rating) and rubber covered keyboard, MyBrix is ​​ideal for measurements in the field and close to the production line. TECHNICAL FEATURES

Temperature Range: Ambient +5°C to 105°C Temperature Stability: ±0.1°C Temperature Uniformity: ±0.6° (more)C Timer: weekly/real time/hour Capacity: 178 L Convection Technology: Dual convection No. of Shelves: 2 supplied/19 max. Interior Dimensions (DxWxH): 543 x 464 x 708 mm Dimensions (LxWxH): 738 x 640 x 920 mm Weight: 70 kg

Dolomite Mitos P-Pump System With Remote Chamber 400 + Flow Rate Sensor This was removed from a univ (more)ersity lab where it was surplus plus to requirements. All units power up but have not been tested further. It is in reasonably good cosmetic condition with minor marks from use. Included are; Includes: -Dolomite Mitos P-Pump-Dolomite Mitos Remote Chamber 400-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor-P-Pump user manual-Remote chamber 400 manual-Sensor manual P-Pump model number- 3200016_4P-Pump serial number- 1600680 Chamber serial number- 490174u7 Sensor serial number- 4903648

Shaker microplate MX100-4A. Ideal for agitation of plates in ELISA. Agitation for 4 microplates. Va (more)riable speed from 200 to 1500 rpm. Timer from 1 min to 99h59min. Resolution: increments of 10 rpm. Brushless Motor. Orbit 3 mm optional Rack for 20 tubes of 1.5 or 0.5 mL.

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.