Bio-Rad MyIQ Single Colour Real-Time PCR Detection System iCycler & SoftwareLab

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)when we tried to connect it to a PC with software we had some issues. (Software not included). We installed software on a test PC and it did seem to connect to the RG3000, but it is stating that there is a Fatal Hardware Malfunction. The machine can't be used until the distributor has service it. After starting it again we got another error: Thermistor is Open. We have removed the casing to check inside the unit and cannot find any obvious issues. There is an LCD panel inside that is showing 'TEMP OVER 140/127.5/2.1/152.0'. This displays as soon as the unit is switched on, so it looks like there is some sort of temperature error happening. There are 4 x PTC EPCOS C810 Thermistors in the power supply section of the unit. It's possible that there is a fault with at least one of those. It is in otherwise reasonable cosmetic condition with marks from use, but is sold for spares/repairs The item holds up to 72 x 0.1ml strip tubes.

Ohaus 30400170 Modular Heat Block, 64 x 0.2 mL PCR Tubes The Ohaus 30400170 Modular Heat Block, 64 x (more) 0.2 mL PCR Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400170 Modular Heat Block, 64 x 0.2 mL PCR Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Perkin Elmer 9600 Gene Amp PCR système Model : N801-0002 Dimensions Width: 52 cm (20 in.) Depth: 61 (more) cm (24 in.) Height: 30.5 cm (12 in.) Weight: 40.5 kg (90 lb)

All-in-one PCR plate centrifuge/vortex mixer that allows for the simultaneous sample preparation of  (more)multiple samples at one time. Versatile through being able to hold non, semi and fully skirted PCR plates with no additional accessories required. The CVP-2 offers three devices in one. • Centrifuge with vortex mixing • PCR plate centrifuge • PCR plate mixer Dimensions (hxdxw): 190 x 350 x 285 mm Centrifuge mixing speed control range: 300 to 1500 rpm Vortex mixing speed control range: 300 to 1200 rpm Speed control increment: 100 rpm G-force/RCF: 245 Centrifuge timer with sound alarm: 0 to 30 minutes Vortex timer with sound alarm: 0 to 60 seconds Centrifuge/vortex cycles: 1 to 999 Capacity: 2 non-, semi or fully skirted microplates External power supply: Input AC 120-230V, 50/60Hz, Output DC 24V Power consumption 18 W (0.75A) Input voltage: 24V DC Weight: 6.15 kg

Real Time PCR Cycler Corbett Rotor Gene 3000. Fully equipped for real-time amplification, endpoint a (more)nalysis, autocall genotyping, and nucleic acid concentration measurement. Rotor for  72 0.1 ml strip tubes. Excitation source 470nm, 530nm, 585nm, 625nm high power LEDs. 510nm, 555nm, 610nm and 660nm, 580nm, 610nm high pass and bandpass detection filters. Detected fluorophores Sybr-Green I, Fam, Tet, Joe, Vic, Max, Rox, Tamra, Cy3, Cy5, Cy5.5, Tex Red. Temperature range 25 - 99 ° C. Heating / cooling range 2.5 ° C / sec (tube temperature); uniformity +/- 0.01 ° C. Includes PC and software. User manual. Real Time PCR Cycler Corbett Rotor Gene 3000. The Rotor-Gene multi-filter system can detect all available real-time chemistries including Sybr-Green, dual-labelled and MGB probes, FRET and Molecular Beacons.Most DNA amplification enzymes/ buffers can be used on the system to generate Quantitation/Melt data. It is not necessary to use expensive kits that are specific to the instrument. Additionally, Rotor-Gene offers the most user-friendly real-time analysis software system currently available. Using an experiment Wizard, a new real-time protocol can be setup within a matter of minutes in a few easy to follow steps.

Ohaus Scout STX2201 portable scale, with plate 170x140mm These balances are ideal for laboratory and (more) industrial applications. They feature an easy-to-navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They are also equipped with excellent overload protection and advanced connection options. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Dynamic / Animal Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3'' (109 mm) touchscreen display with VGA color graphics resolution and user-controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Structure ABS housing, stainless steel deck, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, safety slot, stabilizing feet, level indicator front illuminated Construction features Stability indicator, stackable design with storage cover included (except 1mg models), mechanical and software protection against overload and underload, battery life indicator, automatic shutdown, automatic tare, calibration mass provided on models with capacity higher than 620 gr. Integrated applications: - Weighing: determines the weight of the objects on the pan in the selected unit of measurement. - Piece Counting: Counts the number of pieces on the pan using a uniform weight. - Percent Weighing: Measures the weight of a sample displayed as a percentage of a preset weight reference. - Weight check: compares the weight of a sample with respect to the target limits. - Dynamic Weighing: Weighs an unstable sample load. The scale takes an average of weights over a period of time. - Totalization: measures the cumulative weight of multiple objects. The cumulative total can exceed the capacity of the balance. - Density determination: determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for objects that cannot be easily placed on the weighing pan. - Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. - Mole Weighing: Measures the weight of a sample and  calculate it into Moles automatically New generation of Ohaus portable scales These balances are ideal for laboratory and industrial applications. They feature an easy to navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They also feature excellent overload protection and advanced connection options. - Fast and efficient navigation thanks to the color touchscreen display - High weighing speed and high resolution display of repeatable and reliable results - Excellent overload protection - Different application modes and operation in various languages ​​for simplified weighing The OHAUS Scout scale can be equipped with various connectivity options: RS232, USB, USB device, Ethernet or Bluetooth®. These options guarantee a modern and smart experience, increase the versatility of data collection and transfer functions. Other standard features and equipment Transport lock, stainless steel weighing pan, menu and setting lock switch, adjustable and non-slip feet, bubble level, software and mechanical overload/underload protection, stability indicator, automatic tare, level indicator low battery, auto power off, user selectable print options and communication settings. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Check Weighing: Compares the weight of a sample against target limits. Dynamic Weighing: Weigh an unstable sample load. The balance takes an average of weights over a period of time. Totalization: Measures the cumulative weight of multiple items. Cumulative total may exceed balance capacity. Density Determination: Determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for items that cannot easily be placed on the weighing pan. Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. Mole Weighing: Measures the weight of a sample and automatically calculates it into the mole. MODELS AVAILABLE: Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Animal/Dynamic Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3' (109mm) touchscreen display with color VGA graphics resolution and user controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery level indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Framework ABS housing, stainless steel pan, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, security slot, stabilizing feet, level indicator illuminated front Construction features Stability indicator, stackable design with included storage cover (except 1mg models), mechanical and software overload and underload protection, battery life indicator, auto power off, auto tare, calibration weight provided in models with capacity greater than 620 gr. THE TOUCHSCREEN DISPLAY Using portable scales has never been easier! The color touchscreen display allows you to explore the interface and icon menu, open and close application modes, change units of measure with a single touch of the screen. In seconds, an unmatched level of portable weighing efficiency and functionality. In addition, GLP/GMP traceability makes it easier to monitor and report data.

HP HPLC System 1100 Series This was removed from a university lab where it was surplus to requiremen (more)ts. The lab confirmed the system was working prior to removal. Included are; 1x Vacuum DegasserPr No. G1322AThe unit powers up and is in good cosmetic condition. 1x Quat PumpPr No. G1311AThe unit powers up and is in good cosmetic condition. 1x ALSPr No. G1313AThe unit powers up and is in good cosmetic condition.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-37170 Brady BP-1344 ITEM-37171 Grant Water BathITEM-37172 Electrothermal Heating Mantle ITEM-37173 Boc Regulators ITEM-41531 2 x Pneuchange units ITEM-41532 Grant Water BathITEM-41533 Cylinder change over unitITEM-41534 Grant Water BathITEM-41535 Grant Bio PV-1 ITEM-41536 Corning PH Meter 240 ITEM-41537 Fisherbrand Hydrus 500 ITEM-41538 Optoma Projector ITEM-41539 Stuart SB162ITEM-41540 Stuart CB161 ITEM-41541 Mettler AJ50 ITEM-41542 Box of pipettes ITEM-41543 UVP Transilluminator ITEM-41544 Light box ITEM-41545 PumpITEM-41546 Thermo Espresso Centrifuge ITEM-41547 Sanyo Micro Centaur ITEM-41548 Sauter Scales ITEM-41549 2 x Micro centaurs ITEM-26100 Grant Bio Mini Shaker PMS-1000iITEM-26104 Eppendorf 5415 D ITEM-26106 WhirliMixer ITEM-11686 AdvanSys ASB 3940UA Ultra SCSI Storage Controller IT Equipment ITEM-26094 Freezer racking ITEM-26103 Pharmacia Biotech Electrophoresis Power SupplyITEM-30161 Harvard 6012 stimulator ITEM-26027 CORIOscan Connect +ITEM-26099 Freezer rack sample holders ITEM-30113 Needles, mixed makes/typesITEM-26102 APC Smart-UPS 100 ITEM-26101 Lucent Technologies RM200 Power Supply ITEM-27923 Vickers Instruments Microscope ITEM-27922 Vickers Instruments MicroscopeITEM-27921 Vickers Instruments Microscope ITEM-26107 accujet ProITEM-27919 Vickers Instruments Microscope ITEM-27920 Vickers Instruments Microscope ITEM-27918 Vickers Instruments MicroscopeITEM-27917 Vickers Instruments MicroscopeITEM-27915 Vickers Instruments MicroscopeITEM-27916 Vickers Instruments Microscope ITEM-27914 Vickers Instruments MIO A MicroscopeITEM-27906 Vickers Instruments MicroscopeITEM-26108 MicrocentrifugeITEM-26097 Bio Rad Trans-Blot SD CellITEM-26096 Techne MCS-104S

Beckman Coulter Bucket Covers for GH 3.8 Buckets, Cat. #: 360585The Beckman Coulter Bucket Covers, C (more)at. #: 360585, are designed for use with the Beckman Coulter GH 3.8 Swing Bucket Rotor and crafted from durable, high-impact plastic. Each cover incorporates an ethylene propylene O-ring that fits snugly onto a ledge inside the bucket, ensuring a secure seal. The covers feature built-in latches for easy attachment and secure closure. While these covers are not intended to contain aerosols potentially released from tube breakage, they are effective at retaining most liquids and broken tube particles. This capability significantly minimizes the need for centrifuge chamber cleaning and enhances safety by allowing for controlled access after incidents involving tube breakage. INCLUDED: The Beckman Coulter Bucket Covers for GH 3.8 Buckets, Cat. #: 360585 includes: - Set of 2 Bucket Covers - Full 6 Month Parts and Labor Warranty Beckman Coulter Bucket Covers for GH 3.8 Buckets, Cat. #: 360585Rotor CompatibilityBeckman Coulter GH 3.8 Swing Bucket Rotor

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

ZWIEBEL calibration weight 100g class F1 INOX Stainless steel laboratory calibration weight Brand: Z (more)WIEBEL Weight: 100 g Type / class: F1 maximum permissible error: ± 0.5mg Weight checked on a precision balance at 0.01g (10mg) - see photo In its plastic box uncalibrated weight