Applied Biosystems 7900HT Fast Real Time PCR System Part no. 4330966 Lab

This Applied Biosystems 7900HT Fast Real Time PCR System was removed from a university lab where it  (more)was surplus to requirements. The system powers up and is in good cosmetic condition with only minor usage marks. We have been able to connect the unit to the PC, but unable to test it further. It will likely require servicing before it is used. PC Equipment:-Dell Optiplex GX280 with Dell Monitor, keyboard and mousePSC QS6000 Plus Barcode Scanner PC has the following software:-Applied Biosystems 7900HT Version 2.3 Sequence Detection Systems (SDS)Applied Biosystems RQ Manager Version 1.2 External dimensions -D85 W54 H76cm

Accuris PR2120-N-1000 qMAX Green One-Step RT-qPCR Kit, No Rox, 1000 Reactions The qMAX Green One-Ste (more)p RT-qPCR Kit is aready-to-use 2x master mix and companionthermostable reverse transcriptase for usein highly sensitive real-time RT-PCR assaysin which intercalating dye-based detectionprovides the option of a post amplificationmelt profile. The mix is powered by HSTaq DNA Polymerase, qMAX MMLV derivedReverse Transcriptase, and an optimized bufferchemistry for robust first-strand cDNA synthesisand real-time PCR in a single tube. The mixdelivers earlier quantification cycle values(Ct) and broad range detection for increasedsensitivity, speed, reliability and reproducibility.The qMAX Green One-Step RT-qPCR Kit canbe used to quantify a specific target RNA fromeither total RNA or mRNA while reducing thenumber of pipetting steps and time to result. All Accuris One-Step Kits are compatible with standard and fast cycling protocols and provide increased sensitivity, speed and reproducibility for a broad range of samples and targets. The polymerase mix is available with different levels of ROX reference dye for compatibility with all qPCR instruments. INCLUDED: The Accuris PR2120-N-1000 qMAX Green One-Step RT-qPCR Kit, No Rox, 1000 Reactions includes: - Accuris PR2120-N-1000 qMAX Green One-Step RT-qPCR Kit - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA DB 6.2 Individual PCR Tubes Dry Block (0.2 ml tubes)

SCILOGEX EZee Mini-Centrifuge, Blue Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips Max. Speed 7 (more),000 RPM Max. Capacity 8 x 1.5/2.0ml micro-tubes Driving Motor DC Features - Available in two colors i.e., green, blue - Easy-to-use with dual start/stop function. - Maximum speed 7000rpm/2680xg - Supplied with an 8 place 1.5/2.0ml microtube rotor and 16 x PCR tube rotor & 0.2/0.5ml tube adapters. - Compact design - Whisper quiet operation, noise level ≤ 45dB - Ideal for quick spin downs of microtubes and PCR tubes - Simply close the lid for acceleration and open the lid for deceleration or use the on/off switch. - Accelerates and brakes in seconds. - Universal voltage - Rotors change without tools. EZee mini centrifuges are ideal for microfiltration and quick spin downs from the walls and caps of microcentrifuge tubes. The compact design takes up less than six inches of bench space. Easy open clear colored lids are available in four colors. Simply close the lid for acceleration and open the lid for deceleration, or alternatively use the on/off switch. Click Here to View Product Video INCLUDED: The SCILOGEX EZee Mini-Centrifuge, Blue Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips includes: - 8 Place 1.5/2.0ml Microtube Rotor - 16 x PCR Tube Rotor - 0.2/0.5ml Tube Adapters - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The Alpha Cycler 4 (AC-4) is the only true fully independently controllable four block thermal cycle (more)r available today. The system can be specified in any combination of 96 and 384 well formats across its four bays. Alpha Cycler software allows the user to quickly access their most commonly used protocols without the need to navigate through folders to find it, individual user logins; with protected protocols aswell-as allowing users’ access to temperature logs after each run to monitor the state of the system. • Compact – Small labspace footprint, condenses four truly independent blocks into one unit with no network/connectivity issues. • Active Sample cooling – For sharper amplification and minimal non-specific amplification. • Program Wizard – Generate a protocol specific to your sequence, template source and amplicon length in seconds . • Report generated on run conditions and state following completion of protocol. • USB connectivity and login/out function – Login and out to any system with it automatically configured to your defaults. • Android driven 10” tablet interface – HD screen with excellent response Block temperature range: 10°C to 100°C (4°C final hold) Temperature set point adjustment: 0.1°C Block uniformity (at 55°C): ±0.3°C Temperature accuracy (at 55°C): ±0.25°C Gradient availability: Between 10°C and 100°C Maximum gradient: 29°C Minimum gradient: 1°C Maximum heating rate: 3.4°C/s Minimum heating rate: 0.1°C/s Maximum cooling rate: 1.0°C/s Minimum cooling rate: 0.1°C/s Selectable heated lid temperature: 35°C to 115°C or off Lid uniformity: ±5°C Pre-heat lid: Yes Warm up time (from ambient): < 2 min Dimensions (HxWxD): 330 x 535 x 700 mm Weight: 47 kg

This item has just arrived in our stock. Please enquire for further details.

Boekel Scientific 1493 Concentric Ring Bath, 4 place, 115VThe Boekel Scientific 1493 Concentric Ring (more) Bath, 4 place, 115V, features adjustable water bath openings and heavy-duty 3" legs permanently attached to the body. It has removable concentric rings to suit most laboratory containers and analog temperature control with high and low power modes. The bath offers two power settings: one for rapid heat-up and another for reduced power consumption. It requires no wiring or assembly, is fabricated from stainless steel for a long service life, and comes supplied with a water level regulator and ring sets. The bath is complete and ready to use—just add water and plug in. Applications include solvent extraction, melting solids, evaporating liquids, analysis of total dissolved solids, KD concentration, drying of wastewater sludge, chemical reactions like saponification, QC departments, melting bases in crucibles, and solids testing.INCLUDED: The Boekel Scientific 1493 Concentric Ring Bath, 4 place, 115V includes: - Ring Sets - Water Level Regulator - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic PA53MET-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite Ob (more)jectives S-APO 5X, 10X, 20X, 50X Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Achieve precise 3D measurements with advanced Z-axis profiling and Motic’s Analysis Software. - Enjoy crystal-clear images with advanced Semi-Apochromatic objectives. - Wide field of view with 25mm WF10X eyepieces, leading the industry standard. - Work with ease using a 20° inclined trinocular head. - Color Corrected Infinity Optical System (CCIS®) for superior clarity. - Versatile magnification options with 5X, 10X, 20X, and 50X objectives. - Advanced ergonomic design, compact size, carefully sourced high-quality materials, and versatile digital capabilities ensure minimal operator fatigue during extended periods of operation. The Motic PA53MET-3D is an advanced trinocular metallurgical microscope designed for bright field observation with a 100W halogen lamp and a sophisticated reflected frame for 3D profiling. It features a motorized Z-axis, a 3D control box, and a control pad, along with widefield eyepieces offering 10X magnification and a 25mm field of view. The coded quintuple revolving nosepiece supports bright field observation and includes a slot for Differential Interference Contrast (DIC). Plan S-APO objectives are available in magnifications of 5X, 10X, 20X, and 50X. INCLUDED: The Motic PA53MET-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite includes: - S-APO Objectives: 5X, 10X, 20X, &amp; 50X - 10x/25mm Widefield Eyepiece - Moticam S6 - 0.5X X C-Mount Adapter - Motic Analysis Professional Software - ND6, ND25, and LB filters - 4x4 in. Stage - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Euromex MicroBlue MB.1051-LCD digital microscope with 5.6 inch fixed LED display. Achromatic objecti (more)ves 4/10 / S40x DIN 35 mm, mechanical stage and LED lighting. The modern MicroBlue are high-quality entry-level microscopes, especially suitable for beginners or education, capable of withstanding intensive use and manipulation by non-expert users. 5.6 inch LCD screen with 640 x 480 pixels with built-in SD card for saving of images in jpeg format. Video resolution of 640 x 480 pixels, saving in AVI format. Nosepiece for 4 objectives. Ball-bearing mechanism and click-stops Achromatic 4x N.A. 0.10, 10x N.A. 0.25 and S40x N.A. 0.65 DIN 35 mm parfocal objectives. The S40x objective is spring-mounted. Square stage 115 x 100 mm with 55 x 22 mm X-Y translation stage. Coaxial coarse and fine adjustments with 200 graduations. Precision 15 μm, 3 mm per rotation. Total travel approximately 15 mm. Friction adjustment. Friction of focus control can be adjusted. N.A. 1.25 condenser with iris diaphragm and filter holder. 1 W LED illumination with intensity control, rechargeable batteries with external power supply/charger. Supplied with USB-2 cable, manual and dust cover in styrofoam case.