G-STORM Thermal Cycler GS00482 Lab

This listing for a 1 of 2 BD Max PCR MachineBD MAX System is intended for in vitro diagnostic (IVD)  (more)use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR.The BD MAX System is capable of:Independent nucleic acid extraction and purification with built in extractor.PCR amplification using thermal cycling across 24 lanesReal time detection of products of amplificationIdentification of each Sample Buffer tube by external barcode readerWork List verification by internal barcode readerFluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysisQualitative, quantitative and melt sample analysisFeatures:Integrated and fully-automated extraction and thermocycling stepsProcesses and analyzes up to 24 specimens per runOn-board lysis and extraction with pre-filled reagent stripsReal-time PCR with two 24-lane microfluidic PCR readersDedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715Consistent results through standardized workflow and protocolsRapidly expanding menu and open-system options to help address emerging testing needsLess than one minute of hands on time per sampleElectrical Requirements100 to 240 V, 50/60 Hz, 10 A, 300 VA MaxDimensions:Weight250 lb.Depth28.5 in.Height 37 in.Width 29.7 in.

LightCycler Nano Instrument – Real-time PCR amplification and detection instrument for tube-based as (more)says of up to 32 (4 x 8) samples per run, with minimal noise, footprint and weight. Assembled from just a few building blocks, the robust LightCycler Nano System is easy to transport and install. Up to 32 samples can be run in 0.2 ml tubes connected as strips. Fast heating and cooling is done using Peltier elements. Assay performance is supported further by a heated lid. Excitation is provided by high intensity LEDs filtered to provide light at 500 nm that is capable of exciting all fluorophores commonly used in qPCR. A prism is used to generate spectra from fluorescent emissions. These spectra are imaged using a CMOS camera. The LightCycler Nano Instrument is a 32-sample real-time PCR device for gene expression and genetic variation analyses in mono and dual color mode. Due to its small size, low weight and easy handling of reaction devices and software, this exceptionally silent instrument is ideal for scientists using real-time PCR for everyday use. The LightCycler Nano Instrument is designed for life science research only and not intended for use in diagnostic procedures.

The TRobot PCR Thermal Cycler from Biometra is an automated PCR machine specifically designed for in (more)tegration in robotic environments. This robotic PCR machine uses a small amount of bench space and consists of two separate parts; the block module which can be placed in the robotic enclosure, and the controller which can be located outside of the PCR workstation for easy access. The block module features a motorized heated lid and a uniquely designed motorized plate lifter to elevate plates from the block for easy removal. In addition, the TRobot Manager Software can be directly linked to any origin robot software, allowing for quick, easy access to all thermocycler functions. Overall, the TRobot is an efficient PCR machine that delivers high sample throughput making it the perfect solution for integration in robotic systems. Block Capacity: 96 x .2ml tubes; 96 well microplates; strips of 8 tubes Block Material: Silver block with gold coating (96 well) Temperature Range: -3 to 99ºC Temperature Gradient: No Max. Heating Rate: 3.5ºC/sec Max. Cooling Rate: 2.5ºC/sec Temperature Uniformity: +/- 0.5ºC Control Accuracy: +/- 0.1ºC Lid Temperature Range: 30ºC to 99ºC Temperature Uniformity of Air Cushion: Highest homogeneity Lid Height Adjustment: Motorized lid and motorized plate lifter Program Memory: 250 average programs; unlimited on PC Auto restart after power failure: Yes Noise Emission: Very low Dimension (W x H x D): 17 x 23 x 20 cm (thermocycler) 19 x 44 x 125 cm (controller) Weight: 5.9 kg (thermocycler) 7.0 kg (controller)

The PCR Cabinet is designed for the production of PCR and other sterile samples without contaminatio (more)n. The work area has a HEPA filtered air down flow to provide minimum of CLASS 100 Air at a laminar velocity of approx. 0.4 m/sec. The cabinet is fitted with a timer controlled U.V. light for sterilising the cabinet work-surface and equipment. A safety door is supplied to cover the work area whilst cabinet is being sterilised. The work surface is manufactured from 316 grade stainless steel for ease of cleaning. Laminar flow velocity: >0.4m/sec UV lighting 254 nm at 15 watts Dimensions (WxDxH): 63 x 55 x 90 cm Work area size: 610 x 550 mm Weight: 60 kg

BioTrove OpenArray NT Cycler qPCR Instrument Model - 20001-200 & Software This was removed from (more) a university lab where it was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. Included are; BioTrove OpenArray NT Cycler:Model - 20001-200SN - 0498 Accessories: 1x BioTrove OpenArray Case Sealing Station:Model - 20253SN - CS0571The unit powers on and is in good cosmetic condition. Software CDs 1x Open Array Real-time qPCR Analysis Software CD:item no. 4435938Version 1.0.4 1x Open Array Instrument Configuration CD: Part no. 20395 1x Open Array SNP Genotyping Analysis Software CD:Part no. 20919 Version 1.0.5

Corbett Research Rotor-Gene RG-6000 Real-time PCR Analyser This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up and passes warmup sequences. It connects to the PC and communicates. It is fitted with a 100 disc with lockring. It is in very good cosmetic condition with minor marks. The system includes a Windows 7 Dell PC running Quaigen Rotor-Gene Q 2.4.3.

Working temperature range: 20 to 120°C Temperature stability: ±0.02K Pump pressure max: 0.4 bar Pump (more) flow max: 17 L/min Volume: 12 to 18 L Dimensions (WxDxH): 331 x 536 x 349 mm Bath opening (WxD): 300 x 365 mm Bath height: 150 mm Large LCD display for actual and set values, setting and display resolution of 0.1°C Easy input of set value for temperature and Vario pump via three function keys Automatic safety and warning function in case of low liquid level in the bath Overtemperature protection with automatic cut-out (safety class III, FL for operation with flammable liquids) Audible error alarm Malfunction indicator with automatic diagnosis Calibration and adjustment option

Stereomicroscope Series DZ model DZ.1100. Zoom 1:10 for enlargements total of 8x to 80x, head binoc (more)ular with gradient of 0 to 35°, eyepieces EWF 10x / 22. Objective, apochromatic 1xplan and large stand, ergonomic, illumination LED incident and transmitted. SPECIFICATIONS EYE Pair of eyepieces EWF 10x / 22 mm HEAD • Head binocular ergonomic with tilt variable between 0 and 35 ° • Diopter adjustment ± 5 in both eye • Distance inter-pupillary adjustable between 55 and 75 mm All the optics are coated with anti-fungal and anti-reflective to obtain the maximum performance of the light UNIT OF ZOOM CENTRAL 1:10 for enlargements total of 8 to 80x MAIN OBJECTIVE COMMON • Standard configurations are supplied with a main objective common apochromatic 1x plan, working distance 78 mm • Also available are other main objectives common apochromatic with magnification factors 0.5 x (working distance 126 mm) and 2x (working distance of 33 mm). SUPPORT • Great ergonomic support with a plate of ø 100 mm and two clips holding samples • Focus coaxial macro and micrometric LIGHTING • Supplied with illumination incident and transmitted LED 3 W with built-in power supply of 100-240 V. • Both illuminators can be used simultaneously, and the light intensities can be adjusted separately. PACKAGING Supplied with power cable, cover anti-dust, spare fuse and user's manual. Box of polystyrene.

Micropipettes GILSON P200 (20-200 μl). Sand supply CALIBRATED, sterilized and free of RNAsas.

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Polyscience 040300 Model 210 Heated Recirculator (Ambient to +70C), 120V, 50/60HzDesigned to provide (more) low-cost pumping and heating for closed-loop applications, it connects directly to your own tank or system and provides accurate control within a frequently used temperature range. This Recirculator is ideal for applications such as thawing plasma, tempering photographic solutions, or circulating to an external device. Features Low-cost pumping and heating for closed-loop applications Provides accurate control within a frequently used temperature range Ideal for applications such as thawing plasma, temperating photographic solutions or circulating to an external device The Polyscience 040300 Model 210 Heated Recirculator (Ambient to +70C), 120V, 50/60Hz is brand-new and ready for immediate shipment. Includes: Power Cord Operator's GuideManufacturer's Documentation Full 2 Year Parts and Labor Warranty Polyscience 040300 Model 210 Heated Recirculator (Ambient to +70C), 120V, 50/60Hz Specifications Polyscience 210 Heated Recirculator Series Specifications Working Temperature Range °F Ambient to 158° Working Temperature Range C Ambient to 70° Temperature Stability °F ±0.4° Temperature Stability C ±0.2° Pump Type Centrifugal Pump Speed Single Process Connections 1/2" barb fitting Over-Temperature Protection / Failsafe Heater Control Yes Low Liquid Level Protection Yes Maximum Ambient Temperature °F 95° Maximum Ambient Temperature C 35° Overall Dimensions (L x W x H) (inches) 8 x 9.5 x 8 in Overall Dimensions (L x W x H) (cm) 20.3 x 24.1 x 20.3 cm Shipping Weight (pounds) 12.0 Shipping Weight (kilograms) 5.4 Catalog Page Number 67 60 Hz Only Part Number 040300 Maximum Pressure (psi) 2.0 Maximum Pressure (bar) 0.13 Maximum Pressure Flow Rate (gpm) 3.00 Maximum Pressure Flow Rate (l/min) 11.4 Included Hardware Tubing and clamps Heater Wattage 750

Motic BA210S Binocular Microscope with LED Illumination This version of the Motic BA210S is a biolog (more)ical compound microscope with a binocular head and ASC PL 4x, 10x, 40x S, and 100X S-Oil objectives designed for advanced biology students, teachers, doctors, and lab technicians. Every aspect of these microscopes contributes to making your daily work easier. The ergonomic shape of the stand and the comfortability of the different heads enables fatigue-free viewing for many hours.The BA210S is designed for both educational and teaching environments from basic life sciences to medical applications. Contrast methods like Phase Contrast, Polarization and Dark field are easily performed by using optional accessories.INCLUDED: The Motic BA210S Binocular Microscope with LED Illumination includes: - 10x Eye Piece - Objectives: ASC PL 4X, 10X, 40X S, 100X S-Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty