Eppendorf 5341 Mastercycler epGradient Thermal Cycler with 5340 Control Panel

This UVP Sterilaire UV PCR Workstation was removed from a university lab where it was surplus to req (more)uirements. The unit powers up but only the white light works. We couldn't get the UV lights to work. There is one large crack in particular on the right-hand side at the front. The item is in a reasonable used cosmetic condition but the perspex has a lot of cracks. Internal dimensions - D55 W71 H68cm

Agilent Technologies Stratagene Mx3005P PCR System This was removed from a working lab where it was  (more)surplus to requirements. The unit powers up and has been tested with the PC. It communicates and operates well. The lab confirmed it was fully operational prior to removal. It is supplied with a Dell PC with MxPro 4.10 software installed. The system is in excellent cosmetic condition with minor marks. The MX3005P has the following filters installed: - CY5 - CY5 Filter Set - Excitation Wavelength(NM) 635 - Emission Wavelength(NM) 665. - CY3 - CY3 Filter Set - Excitation Wavelength(NM) 545 - Emission Wavelength(NM) 568. - ROX - ROX Filter Set - Excitation Wavelength(NM) 585 - Emission Wavelength(NM) 610 - HEX - HEX-JOE Filter Set - Excitation Wavelength(NM) 535 - Emission Wavelength(NM) 555 - FAM - FAM Filter Set - Excitation Wavelength(NM) 492 - Emission Wavelength(NM) 516 The total lamp hours are: 277:12.The timer was last reset: 28/09/2011. Includes: -Stratagene MxPro QPCR Software V4.10d-Software Certificate And Registration Packet-Agilent Data System Recovery Kit-Mx3005P Setup And User's Guide-Keyboard and mouse-Monitor +PC

KingFisher FLEX Particle Processor Type 711 This was removed from a working lab where it was surplus (more) to requirements. The unit powers up and the lab confirmed that it was in full working order prior to removal. It is in excellent cosmetic condition with minor marks from use. It has a 96-well head fitted. The system is supplied with a Dell Optiplex 7010 unning Windows 7.Monitor, mouse, keyboard & USB cable included.Thermo BindIT 4.1 installed.Kingfisher Flex connects to the PC.

Real Time PCR Cycler Corbett Rotor Gene 3000. Fully equipped for real-time amplification, endpoint a (more)nalysis, autocall genotyping, and nucleic acid concentration measurement. Rotor for  72 0.1 ml strip tubes. Excitation source 470nm, 530nm, 585nm, 625nm high power LEDs. 510nm, 555nm, 610nm and 660nm, 580nm, 610nm high pass and bandpass detection filters. Detected fluorophores Sybr-Green I, Fam, Tet, Joe, Vic, Max, Rox, Tamra, Cy3, Cy5, Cy5.5, Tex Red. Temperature range 25 - 99 ° C. Heating / cooling range 2.5 ° C / sec (tube temperature); uniformity +/- 0.01 ° C. Includes PC and software. User manual. Real Time PCR Cycler Corbett Rotor Gene 3000. The Rotor-Gene multi-filter system can detect all available real-time chemistries including Sybr-Green, dual-labelled and MGB probes, FRET and Molecular Beacons.Most DNA amplification enzymes/ buffers can be used on the system to generate Quantitation/Melt data. It is not necessary to use expensive kits that are specific to the instrument. Additionally, Rotor-Gene offers the most user-friendly real-time analysis software system currently available. Using an experiment Wizard, a new real-time protocol can be setup within a matter of minutes in a few easy to follow steps.

Hermle 4 x pcr rotor The Hermle 4 x PCR rotor is designed to provide efficient and reliable sample p (more)rocessing in PCR applications. This rotor is compatible with the Hermle Z32-HK, Z327, and Z446 series centrifuges, making it an excellent addition to any laboratory using these centrifuges. The rotor has a maximum speed of 15,000 RPM and a maximum relative centrifugal force (RCF) of 15,343 x g, allowing for fast and efficient sample processing. The rotor has a 45° angle, which ensures the samples are held securely in place and can be easily accessed. This rotor can hold up to 4 x 8-Place PCR strips, providing a total capacity of 32 samples per run. This makes it ideal for laboratories that require a high throughput of samples in PCR applications. The rotor is made from high-quality materials, ensuring its durability and longevity even with repeated use. Its design allows for easy and quick loading and unloading of samples, increasing the efficiency of the centrifugation process. INCLUDED: The Hermle 4 x pcr rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris PR2000-H-1000 qMAX Green, with Blue Tracking Dye, High Rox qPCR Mix, 1000 Reactions Supplied (more) as a ready-to-use 2X master mix, qMax Green has been engineered for high sensitivity, fact cycling and excellent reproducibility. Accuris Hot Start Polymerase provides accurate PCR of a variety of templates including low copy number and difficult sequences, while the proprietary qMax Green intercalating dye exhibits higher fluorescence and lower PCR inhibition than other popular green dyes.These two components are supported by a specially formulated buffer with an exacting combination of salts, PCR enhancers, stabilizers and pH that results in earlier Ct values and a high specificity across a broad dynamic range. An inert blue dye is also mixed into the qMAX Green to allow easy visualization during pipetting. INCLUDED: The Accuris PR1001-HS-1000 Hot Start Taq Master Mix, 2X Conc., 1000 Reactions includes: - Accuris PR2000-H-1000 qMAX Green - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This listing is for a Labcold RSBG1030MD Blood Bank RefrigeratorLabcold RSBG1030MD Blood Bank Refrig (more)eratorThe RSBG1030MD Blood Bank refrigerator is the smallest in the Labcold range, this stainless steel lined blood bank is ideal for storing small quantities of red blood cells safely and securely.Adjustable shelves behind clear inner doors ensure stable storage temperatures during door openings, whilst allowing rapid checking of stocks through glass door. Supplied with a key pad lockable door.Although the most compact unit in the Labcold Blood Bank range, this model is a certified Medical Device in accordance with Directive 93/42/EEC and is compliant with BS4376: Part 1:1991.LABCOLD’S UNIQUE ALARM AND CONTROL SYSTEM is fitted providing a constant check of all important performance parameters with clear symbol displays of normal operation or alarm status.A touch panel display constantly shows both chamber and liquid load simulator temperatures. A mutable, audible alarm is standard and remote alarm contacts are provided to integrate with compatible external systems.Features:• Benchtop style.• Stainless steel interior.• 2 Adjustable shelves.• Labcold Alarm and Control System.• 7-day chart recorder.• Dual temperature display with load simulator.• Blood audit interface.• Core temperature action alarm.• Certified Medical Device in accordance with EU Directive 93/42/EEC and is compliant with BS4376: Part 1:1991.Specifications:• Operating temperaute: +4°C.• Capacity (ltr): 88ltr.• Capacity (250ml bags): 30 (approx).• Interior construction: Stainless steel.• Exterior construction: Powder coated steel.• Shelves: 2.• Weight: 42kg.

Working temperature range: 20 to 120°C Temperature stability: ±0.02K Pump pressure max: 0.4 bar Pump (more) flow max: 17 L/min Volume: 9 to 12 L Dimensions (WxDxH): 331 x 360 x 349 mm Bath opening (WxD): 300 x 190 mm Bath height: 150 mm Large LCD display for actual and set values, setting and display resolution of 0.1°C Easy input of set value for temperature and Vario pump via three function keys Automatic safety and warning function in case of low liquid level in the bath Overtemperature protection with automatic cut-out (safety class III, FL for operation with flammable liquids) Audible error alarm Malfunction indicator with automatic diagnosis Calibration and adjustment option Weight: 9 kg

If you buy a WLY series balance by July 31, 2024, you will receive each of these products along with (more) a FREE lifetime license for the Workflow Module. Precision Balance WLY Fast and accurate weight determination thanks to the duo: the WLY multifunction balance and the PUE7 weighing terminal. Ease of operation and maximum automation of the weighing process. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations and differential weighing. The power of WLY’s working mods. Use the potential Barcode scanners, receipt printers, label printers, RFID readers, PC equipment or an additional weighing platform – thanks to multipurpose software, WLY balance can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. DIY with WLY With WLY you will Do It Yourself: You will program on-screen keys and functional keys You will program infrared proximity sensors You will design printouts You will design text data that is displayed in an indicator display. This balance is the result of a combination of our experience and true precision. Want to generate labels? You can. With Label Editor software, you will generate: Standard labels for single products C labels for cumulative containers CC labels for containers with cumulative containers. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW