Bio-Rad MyCycler Thermal Cycler System 1709703

BioTrove OpenArray NT Cycler qPCR Instrument Model - 20001-200 & Software This was removed from (more) a university lab where it was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. Included are; BioTrove OpenArray NT Cycler:Model - 20001-200SN - 0498 Accessories: 1x BioTrove OpenArray Case Sealing Station:Model - 20253SN - CS0571The unit powers on and is in good cosmetic condition. Software CDs 1x Open Array Real-time qPCR Analysis Software CD:item no. 4435938Version 1.0.4 1x Open Array Instrument Configuration CD: Part no. 20395 1x Open Array SNP Genotyping Analysis Software CD:Part no. 20919 Version 1.0.5

BIO-RAD iCycler Thermal Cycler with iQ5 PCR Detection System Lab The unit powers up and is in good w (more)orking order. It is in good cosmetic condition with minor marks.

Corbett Research Rotor-Gene RG-3000 with PC & Software This was removed from a university lab w (more)here it was surplus to requirements. The unit powers up and has been tested with the software. It was programmed to run and worked well in testing. It is supplied with a Windows 7 PC with RotoGene 6.1 installed. Rotor holds 36 x 0.2ml Comes with:-PC Cable2 x Spare rotor parts2 x Operators ManualsRotor Gene Back Up Floppy DiskRotor Gene Data Floppy DiskThe Rotor Gene Set up Files v4.2Rotor-Gene Software Version 4.6Rotor-gene 3000 Operating Software V4.6.94RotorGene 36/72 Maintenance Pack 1.0/1.1There are 4 more copied discs of the same

Block: Gold anodized 96 well block Max Heating Rate: 3.5°C/sec Max Cooling Rate: 2.5°C/sec Avg Heati (more)ng Rate: 3.0°C/sec Avg Cooling Rate: 2.0°C/sec Temperature Uniformity 55°C: ± 0.20°C within 15 sec Temperature Uniformity 70°C: ± 0.30°C within 15 sec Temperature Uniformity 95°C: ± 0.60°C within 15 sec Block Temperature Range: 3°C to 99°C Gradient Temperature Range 20 to 99 °C Control Accuracy +/- 0.1 °C Block Format: 96 well (70µl) Memory: 350 typical programs in up to 30 user directories (password protected) Auto restart after power failure: Yes Lid Temperature Range: 30 to 99°C Dimensions (WxDxH): 280 x 380 x 240 mm Weight: 13.0 kg

Accuris PR2122-N-25BLK qMAX Multiplex One-Step RT-qPCR Kit, No ROX, 2500 Reactions (1x25ml, 2x1.25ml (more)) qMAX Probe One Step Multiplex kits are specifically developed and optimized for efficient probe-based detection of multiple targets in a single reaction well. The Multiplex formulation is comprised of a 20x reverse transcriptase and 2x PCR Mix preparation ideally suited for complex RNA samples including low-copy number viral RNA commonly used in the clinical and research laboratory. qMAX Probe One Step Multiplex kits have been designed to overcome the many challenges of multiplex RT-PCR, by addressing important factors such as the balance between magnesium chloride and deoxynucleotide concentrations, the relative Taq Polymerase and reverse transcriptase concentration, and the ionic conditions of the core reaction buffer. All Accuris One-Step Kits are compatible with standard and fast cycling protocols and provide increased sensitivity, speed and reproducibility for a broad range of samples and targets. The polymerase mix is available with different levels of ROX reference dye for compatibility with all qPCR instruments. INCLUDED: The Accuris PR1001-HS-1000 Hot Start Taq Master Mix, 2X Conc., 1000 Reactions includes: - Accuris PR2122-N-25BLK qMAX Multiplex One-Step RT-qPCR Kit - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

qPCR Laboratory Workstation consisting of: Myra Liquid Handling System Mic qPCR Cycler Myra Liquid H (more)andling System: Position control: Closed loop, 100 μm resolution Calibration: High precision camera Pipetting volume range: 1 – 50 μL Liquid level detection: Pressure sensing Tips per rack: 384 Dispense modes: Single Precision: 1 μL; < 10% CV, 5 – 50 μL; < 1% CV Accuracy: 1 μL; < 10%, 5 – 50 μL; < 1% Tip disposal type: Internal enclosed waste container HEPA filter: 99.98% at 0.3 μm UV lamp: High intensity 70 mW 280 nm UV LED Dimensions (HxWxL): 310 x 350 x 460 mm Weight: 9kg Mic qPCR Cycler: Temperature Accuracy: ±0.25°C Temperature Uniformity: ±0.10°C Ramp Rates: Heating 5°C/s, Cooling 4°C/s Temperature Input Range: 35 to 99°C Detectors: Photodiode per channel Channels: 2 Excitation Sources: High power LED for each channel Channels: Green – Ex 465nm – Em 510nm, Yellow – Ex 540nm – Em 570nm, Orange – Ex 585nm – Em 618nm, Red – Ex 635nm – Em 675nm Samples per Instrument: 48 Reaction Volume Range: 5 to 30 µL Acquisition Time: 1 second Dimensions (WxDxH): 150 x 150 x 130 mm Weight: 2 kg

RMC MT-7 Microtome with Accessories Set This was removed from a university lab where it was surplus  (more)to requirements. The unit powers up and is mechanically in good working order. It is in good cosmetic condition with minor marks. It also includes various unnamed accessories. These include bracket fixings, allen keys, screws, fuses, safety guards, eyepieces and other items we are unable to identify. Also included is a dust cover and operational manuals x 3.

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

Muffle furnace Selecta SELECT HORN. Chamber capacity 9 L. Adjustable temperature up to 1150 °C. Accu (more)racy ±1 °C. Resolution: 1 digit. Digital electronic temperature and time controller that allows programming a ramp of up to 8 segments or two of 4 segments. Heating elements evenly distributed. Fiber-ceramic insulation. Up-and-over door with disconnection of operation in opening. It has some flaws in the paint that do not prevent its operation. Dimensions: inside 15*20*30 cm, outside 58*59*65 cm; 70KG. 3000 W. User manual. The Selecta SELECT HORN muffle furnace is high-quality equipment designed to carry out calcination, heat treatment and other processes at high temperatures in a precise and controlled manner. With a heavy-duty heating chamber and a digital control system, this oven guarantees uniform heat distribution and a constant temperature throughout its interior. With a capacity of up to 1150°C, the Selecta SELECT HORN muffle furnace is ideal for research laboratories, chemical and metallurgical industries, as well as applications in the field of ceramics and jewelry. Its compact design and robust construction make it easy to use and maintain, ensuring reliable, long-lasting performance in every work cycle. In addition, the Selecta SELECT HORN muffle furnace has a safety system that protects both the equipment and the user, avoiding possible accidents during its operation. With an intuitive interface and programmable functions, this oven offers versatility and precision in each process, making it an indispensable tool for any laboratory or industry that requires high controlled temperatures.

F1 class standard: knob weight Nominal value: 2 g Material: stainless steel Knob weight is exception (more)al measuring tool that represent the pinnacle of precision in the field of metrology. Classified as F1 metrology class, it is perfect for advanced applications where every detail of measurement is of paramount importance.

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module&rsquo;s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).