Benchmark R2020-PCR Tube holder, 96 x 0.2ml, 12 x PCR strips or one PCR plate (R2024 and H2024 Only)

This listing is for a Qiagen Qiagility PCR Prep System.The unit is in full working condition and is  (more)ready for immidate realese.The Qiagen QIAgility Automated PCR Prep System provides users with a fully automated PCR setup, responsive software, and increased productivity. This compact, benchtop liquid handling robot eliminates the need for manual pipetting steps, with high precision and reproducibility. The Qiagen QIAgility uses Qiagen PCR kits and step-by-step guided software to automatically calculate all mixes and worktable set up so you won’t need to program pipetting steps. This PCR prep system uses a single-channel pipetting head with dynamic liquid level sensing and supports almost any kind of thermal cycler and labware.HEPA filter: Preinstalled dual-cartridge 3M Air-Mate HEPA (High-Efficiency Particulate Air) filter system provides positive pressure clean air within the closed hood.Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips.Pipetting head: Single-channelPrecision: CV <1%, 5–200 µl (dry-well transfer) CV <5%, 2–5 µl (wet-well transfer) CV <10%, 1 µlTable capacity:6 x SBS positions (127.76 x 85.48 mm) for adapters and Tip Rack Holders 1 x Master Mix Block 1 x Reagent BlockTip disposal:All used tips ejected externally — no waste accumulation on the worktableTip volume:1–200 µlUV lamp Preinstalled UV lamp for worktable decontaminationDeck Dimensions 19.5×14”Dimensions 21x25x18″Electrical 100–240 V AC, 250 VA, 50–60 HzWeight 90.2 lbEnvironmental Tolerances Operating temperature, 15–30 °C (59–86°F), Operating humidity: 40–70%

Block: Gold anodized 96 well block Maximum Heating Rate: 3.5°C/sec Maximum Cooling Rate: 2.5°C/sec A (more)vg Heating Rate: 3.0°C/sec Avg Cooling Rate: 2.0°C/sec Temperature Uniformity at 55°C: ± 0.2°C within 15 sec Temperature Uniformity at 70 °C: ± 0.3°C within 15 sec Temperature Uniformity at 95 °C: ± 0.6°C within 15 sec Block Temperature Range: 3°C to 99°C Gradient Temperature Range: 20 to 99°C Control Accuracy: ± 0.1°C Programming: Easy spreadsheet programming Memory: 350 typical programs in up to 30 user directories (password protected) Auto restart after power failure: Yes Heated Lid: High Performance Smart Lid (HPSL) Lid Temperature Range: 30 to 99°C Dimensions (WxDxH): 280 x 380 x 240 mm Weight: 13 kg

Benchmark C2417-RCMB COMBI-rotor for 24 x 1.5/2.0ml and 2 x PCR Strips (16 x 0.2ml) The Benchmark C2 (more)417-RCMB COMBI-rotor for 24 x 1.5/2.0ml and 2 x PCR Strips (16 x 0.2ml) is for use with Benchmark MC-24 and MC-24R centrifuges. This rotor has a maximum speed of 13,500 RPM, and a maximum capacity of 24 x 1.5/2.0ml or 2 x PCR strips. INCLUDED: The Benchmark C2417-RCMB COMBI-rotor for 24 x 1.5/2.0ml and 2 x PCR Strips (16 x 0.2ml) includes: - Benchmark C2417-RCMB COMBI-rotor - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The StepOnePlus Real-Time PCR System is a 96-well Real-Time PCR instrument perfect for both first-ti (more)me and experienced users. The StepOnePlus Real-Time PCR System can be setup in a variety of configurations and comes ready to use, out of the box, with intuitive data analysis and instrument control software. Utilizing robust LED based 4-color optical recording, the StepOnePlus Real-Time PCR System is designed to deliver precise, quantitative Real-Time PCR results for a variety of genomic research applications. Advanced software and instrumentation for performing a wide array of genomic assays Sensitive 4-color optical LED recording system Intuitive and robust software perfect for both first-time and advanced users Simple and flexible instrument set-up and usage New StepOne Software The StepOne Software included with the StepOnePlus Real-Time PCR System runs on the Windows XP operating system and provides instrument control, data collection, and data analysis capabilities (analysis software is also compatible with Windows 7). This latest version includes capabilities to collect melt curve data for High Resolution Melt (HRM) applications and the option to export in Real-Time PCR Data Markup Language (RDML) for compatibility with MIQE guidelines. Rapid and Simple Assay Set-Up This remarkably simple Real-Time PCR system is designed with an LCD touchscreen and a user-friendly interface that brings the power of genetic studies to researchers new to Real-Time PCR. The intuitive software and protocol wizards help guide new users through their Real-Time PCR experiments. The StepOnePlus Real-Time PCR System also includes a quick-start setup so that you start a run immediately and enter plate information at a later time. Sensitive LED-Based 4 Color Fluorescence Reading The StepOnePlus Real-Time PCR System utilizes a long-life LED-based optical system that can record fluorescence from FAM/SYBR Green, VIC/JOE, NED/TAMRA, and ROX dyes. This cost-effective, 4-color, 96-well system delivers precise, quantitative Real-Time PCR results and saves data from all filters in every run without depending on a computer or plate setup. It can discriminate between 2 populations of 5,000 and 10,000 template copies of a TaqMan assay with 99.7% confidence. Compatible with Many Genomic Analysis Techniques Perform a variety of standard and demanding genetic analysis research techniques on one instrument using the user friendly StepOnePlus Real-Time PCR System and StepOne Software. The StepOnePlus System supports many Real-Time PCR applications, including the following: SNP Genotyping Gene Expression Analysis MicroRNA Expression Protein Expression Translocation Analysis Gene Detection Viral Load Analysis The included StepOne Software supports a variety of analysis methods , including the following: Standard Curve (absolute quantitation) Relative Standard Curve Comparative Ct (ΔΔCt) (relative quantitation) Genotyping and Presence/Absence Melt Curve Analysis (as a standalone application) High Resolution Melting (as a standalone applications)

qPCR Laboratory Workstation consisting of: Myra Liquid Handling System Mic qPCR Cycler Myra Liquid H (more)andling System: Position control: Closed loop, 100 μm resolution Calibration: High precision camera Pipetting volume range: 1 – 50 μL Liquid level detection: Pressure sensing Tips per rack: 384 Dispense modes: Single Precision: 1 μL; < 10% CV, 5 – 50 μL; < 1% CV Accuracy: 1 μL; < 10%, 5 – 50 μL; < 1% Tip disposal type: Internal enclosed waste container HEPA filter: 99.98% at 0.3 μm UV lamp: High intensity 70 mW 280 nm UV LED Dimensions (HxWxL): 310 x 350 x 460 mm Weight: 9kg Mic qPCR Cycler: Temperature Accuracy: ±0.25°C Temperature Uniformity: ±0.10°C Ramp Rates: Heating 5°C/s, Cooling 4°C/s Temperature Input Range: 35 to 99°C Detectors: Photodiode per channel Channels: 2 Excitation Sources: High power LED for each channel Channels: Green – Ex 465nm – Em 510nm, Yellow – Ex 540nm – Em 570nm, Orange – Ex 585nm – Em 618nm, Red – Ex 635nm – Em 675nm Samples per Instrument: 48 Reaction Volume Range: 5 to 30 µL Acquisition Time: 1 second Dimensions (WxDxH): 150 x 150 x 130 mm Weight: 2 kg

F1 Mass Standard - knob weights without adjustment chamber - set (1 mg - 200 g), plastic box Number  (more)of pieces in the set: 23

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Key Features: Highest class of accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Plastic packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. Set Includes: 8 mass standards, 2 pairs of tweezers, 1 brush and 1 pair of gloves. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA RW 28 Digital Mechanical Overhead Stirrer Speed Range 60 to 1,400 RPM Viscosity Max. 50,000 mPas (more) Stirring Quantity Max. 80 l Features - Digital speed display - Infinitely adjustable speed from 60 to 1400 rpm in twospeed ranges - Push-through agitator shafts - Overload protection - Error code display - Robust, ergonomic design - Quiet operation - With constant power-drive Powerful, mechanically controlled laboratory stirrerdesigned for highly viscous applications for quantities up to 80 l (H2O). It issuitable for intensive mixing for use in laboratories and pilot plants. Thestirrer comes equipped with a protection for overheating of the motor by meansof self-locking temperature limiter. Additionally, to secure bowls, a stirringshaft protection and clamping fixture are optionally available.