Applied Biosystems StepOne Plus PCR System

Applied Biosystems ABI Prism 7900HT This was removed from a university lab where it was surplus to  (more)requirements. The unit powers up but has the following issues. The 7900 did connect to the PC at first but there appears to be a fault with the plate loader. The door will not open when instructed. If you try to run a program you get a 3003 error. 'unable to load the plate, Tray not at up position'.There was a loud humming noise coming from the unit which appeared to get louder the longer it was switched on. Then would no longer connect to the PC. We have removed the side panels but cannot see any obvious issues. It is sold for spares/repairs. The PC is included. Dell Optiplex PCDell 17" MonitorKeyboard & MouseUSB CableDVI Cable All parts power on and work, the pc has ABI 7900HT Sequence Detection Systems Version 2.4.1 Software.

ITEM-36232

Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System This was removed f (more)rom a university lab where it was surplus to requirements. The system powers up and connects to the included Robotics 4 software. It has been tested to home the tip loader. The UV and fan functions also work. It is in good cosmetic condition with marks from use. The system consists of: 1 x CAS1200 RobotSN - A080821 1 x Dell Optiplex 380 with Monitor, Keyboard & Mouse.Has a fresh copy of Windows XP installed and Corbett Robotics 4 software.All leads needed are included.

Ohaus 30314841 4 x 8 w/ PCR Strip Fixed Angle Rotor The Ohaus 30314841 4 x 8 w/ PCR Strip Fixed Angl (more)e Rotor accommodates a capacity of up to 4 x 8-w PCR Strip. This rotor is designed for use with Ohaus FC5718, FC5718R, FC5916, and FC5916R series centrifuges, and reaches speeds up to 15,000 RPM with a maximum RCF of 15,343 x g. INCLUDED: The Ohaus 30314841 4 x 8 w/ PCR Strip Fixed Angle Rotor includes: - Ohaus 30314841 4 x 8 w/ PCR Strip Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Accuris PR2120-L-1000 qMAX Green One-Step RT-qPCR Kit, Low Rox, 1000 Reactions The qMAX Green One-St (more)ep RT-qPCR Kit is aready-to-use 2x master mix and companionthermostable reverse transcriptase for usein highly sensitive real-time RT-PCR assaysin which intercalating dye-based detectionprovides the option of a post amplificationmelt profile. The mix is powered by HSTaq DNA Polymerase, qMAX MMLV derivedReverse Transcriptase, and an optimized bufferchemistry for robust first-strand cDNA synthesisand real-time PCR in a single tube. The mixdelivers earlier quantification cycle values(Ct) and broad range detection for increasedsensitivity, speed, reliability and reproducibility.The qMAX Green One-Step RT-qPCR Kit canbe used to quantify a specific target RNA fromeither total RNA or mRNA while reducing thenumber of pipetting steps and time to result. All Accuris One-Step Kits are compatible with standard and fast cycling protocols and provide increased sensitivity, speed and reproducibility for a broad range of samples and targets. The polymerase mix is available with different levels of ROX reference dye for compatibility with all qPCR instruments. INCLUDED: The Accuris PR2120-L-1000 qMAX Green One-Step RT-qPCR Kit, Low Rox, 1000 Reactions includes: - 10x1ml reaction mix, 10x100µl RTase - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This Hewlett Packard / Agilent 1100 Series HPLC G1313A Autosampler was removed from a university lab (more) where it was surplus to requirements. The item is in good cosmetic condition and powered up. When powered up, the item ran a start-up self-test that displayed the motor in good working order, we are unable to test this item further at our facility.

Are you overwhelmed by the number of production processes? What about having them all under control? (more) To be able to analyse and correct them in real time? After all, it is the key to increasing the efficiency of the production line! Our clients, the factory owners, were the ones who told us about their problems and needs. Our answer is simple: the E2R System. This software is designed to make your work easier. The E2R System consists of six independent modules: 1. E2R Weighing, 2. E2R Weighing Records, 3. E2R Formulations, 4. E2R PGC, 5. E2R Checkweigher, 6. E2R Moisture Analyzer. Choose the best module for your company. Need more information? With the E2R Moisture Analyzer module, you can: read moisture analyzer data and store it in the MS SQL database; due to the possibility of online operation, monitor the parameters of currently running drying processes from a computer; display information about current measurements as well as the status and outcome of the drying process in real time; generate online graphs in relation to drying time; have access to the reports generated by moisture analyzers; operate and monitor up to 16 moisture analyzers; automatically start the connection of the moisture analyzers with the database after the computer is switched on (operation in system service mode); connect the moisture analyzers to the Ethernet network using an RS232 multiport card and an Ethernet/RS232 converter; filter dates and records, as well as group and sort orders and individual measurements; generate archived reports and graphs; define the permission levels for specific operators; select the language of each of the system components; customize the program’s graphical interface and modify reports and graphs; work over an Ethernet network.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Eppendorf 3 x 2.6/7ml Adapters for F-34-6-38, Cat. # 022637279 New in torn packaging Eppendorf 3 x t (more)ubes 2.6 - 7 ml / 75 mm Adapters for fixed angle rotor F-34-6-38, Cat. # 022637279. For use with 5804/R and 5810/R centrifuges. This is a two piece set, and the adapters are new in torn packaging. INCLUDED: The Eppendorf 3 x 2.6/7ml Adapters for F-34-6-38, Cat. # 022637279 includes: - Full 6 Month Parts and Labor Warranty

0