Applied Biosystems GeneAmp 9700 PCR System

Applied Biosystems OpenArray Accufill Instrument Model 3072 PCR System This was removed from a unive (more)rsity lab where it was surplus to requirements. The powers up but has not been tested further at our facility. The lab confirmed that it was in working order before it was put into storage. It is in excellent cosmetic condition with marks from use.

This Techne Flexigene FFG02FSD Bench-Top Thermal Cycler was removed from a laboratory where it was s (more)urplus to requirements. The unit is in good condition but is showing signs of wear. It powers on, and a basic program was run to test the lid and the sample tray heater, which is working. It has not been tested further.

QIAGEN’s real-time PCR cycler, the Rotor-Gene Q, combines multiple optimized design features to prov (more)ide the outstanding performance and reliable results that your research demands. Together with optimized QIAGEN kits for real-time PCR, the Rotor-Gene Q enables streamlined analysis for a wide range of applications. Q-Rex Software is the new operating and analysis software for life science qPCR applications, with a plug-in concept that lets you add new functionality without affecting established workflows. A range of QIAGEN kits for the Rotor-Gene Q enables reliable quantification in all your real-time PCR applications without the need for optimization of reaction and cycling conditions. Kits for real-time PCR and HRM applications are available for: Gene expression analysis Pathogen detection DNA methylation analysis Genotyping and gene scanning miRNA research Channel: Blue Excitation: 365 ± 20 nm Detection: 460 ± 20 nm Examples of fluorophores detected: Marina Blue, Edans, Bothell Blue, Alexa Fluor 350, AMCA-X Channel: Green Excitation: 470 ± 10 nm Detection: 510 ± 5 nm Examples of fluorophores detected: FAM, SYBR Green I, Fluorescein, EvaGreen, Alexa Fluor 488 Channel: Yellow Excitation: 530 ± 5 nm Detection: 557 ± 5 nm Examples of fluorophores detected: JOE, VIC, HEX, TET, MAX, CAL Fluor Gold 540, Yakima Yellow Channel: Orange Excitation: 585 ± 5 nm Detection: 610 ± 5 nm Examples of fluorophores detected: ROX, CAL Fluor Red 610, Cy 3.5, Texas Red, Alexa Fluor 568 Channel: Red Excitation: 625 ± 5 nm Detection: 660 ± 10 nm Examples of fluorophores detected: Cy5, Quasar 670, LightCycler Red640, Alexa Fluor 633 Channel: Crimson Excitation: 680 ± 5 nm Detection: 712 high pass nm Examples of fluorophores detected: Quasar 705, LightCycler Red705, Alexa Fluor 680 Channel: HRM Excitation: 460 ± 20 nm Detection: 510 ± 5 nm Examples of fluorophores detected: SYBR Green I, SYTO9, LC Green, LC Green Plus+, EvaGreen Operating software is available. Analysis software must be purchased.

FURTHER DETAILS TO FOLLOW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Alpha Cycler 4 (AC-4) is the only true fully independently controllable four block thermal cycle (more)r available today. The system can be specified in any combination of 96 and 384 well formats across its four bays. Alpha Cycler software allows the user to quickly access their most commonly used protocols without the need to navigate through folders to find it, individual user logins; with protected protocols aswell-as allowing users’ access to temperature logs after each run to monitor the state of the system. • Compact – Small labspace footprint, condenses four truly independent blocks into one unit with no network/connectivity issues. • Active Sample cooling – For sharper amplification and minimal non-specific amplification. • Program Wizard – Generate a protocol specific to your sequence, template source and amplicon length in seconds . • Report generated on run conditions and state following completion of protocol. • USB connectivity and login/out function – Login and out to any system with it automatically configured to your defaults. • Android driven 10” tablet interface – HD screen with excellent response Block temperature range: 10°C to 100°C (4°C final hold) Temperature set point adjustment: 0.1°C Block uniformity (at 55°C): ±0.3°C Temperature accuracy (at 55°C): ±0.25°C Gradient availability: Between 10°C and 100°C Maximum gradient: 29°C Minimum gradient: 1°C Maximum heating rate: 3.4°C/s Minimum heating rate: 0.1°C/s Maximum cooling rate: 1.0°C/s Minimum cooling rate: 0.1°C/s Selectable heated lid temperature: 35°C to 115°C or off Lid uniformity: ±5°C Pre-heat lid: Yes Warm up time (from ambient): < 2 min Dimensions (HxWxD): 330 x 535 x 700 mm Weight: 47 kg

Marzhauser Wetzlar Scan 8 Slides Microscope Stage + Controller Lab These items were removed from a  (more)university where they were surplus to requirement. All items are in good cosmetic condition, we are unable to test them at our facility. Includes the following: - 1 x Scan 8 Slides Microscope Stage S/N-08110333 - 1 x Marzhauser Wetzlar Joystick 3-Axis Controller S/N-0837093031 - 1 x Ariol 3.3 Software Disc + USB Stick - All relevant cables

Benchmark IPS7101-50 HCS-50 High Capacity Magnetic Stirrer, 50L The Benchmark Industrial HCS Series  (more)of high-capacity stirrers provide reliable performance and safe operation for high throughput lab use. These stirrers feature a durable, chemically resistant white ceramic top plate, which protects the internals of the stirrer from leaks and spills. The powerful motor drive system ensures efficient and thorough mixing in large vessels and viscous samples. Ideal for large-scale stirring applications, the HCS Series offers 50-liter and 150-liter maximum capacity models, as HCS-50L and HCS-150L respectively. Mixing speed can be viewed on the large digital display, and speed is adjustable from 50 rpm to 1500 rpm (HCS-50L) or 1200 rpm (HCS-150L). The built-in timer settings range from 1 second to 9 hours and include a continuous operation setting. INCLUDED: The Benchmark IPS7101-50 HCS-50 High Capacity Magnetic Stirrer, 50L includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson MINIPULS 3 Peristaltic Pump Head, R8 Eight Channel The Gilson MINIPULS 3 Peristaltic Pump Hea (more)d, R8 Eight Channel is a versatile pump head with a maximum flow rate of 40 ml/min and a minimum flow rate of 0.3 ul/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R8 Eight Channel includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Frame intended for 4-load-cell powder-coated scales C9, that are to be embedded in the ground.

Turbomolecular vacuum pump Edwards EXT255H 24V. Pumping speed: 220 lit/sec. Inlet flange: ISO100. Ba (more)cking connection: KF25 Minimum size backing pump: 10CMH. Cooling: Water or Air. Edwards EXC 100 or EXC 120 Turbo Pump Controller is needed to operate the pump (excluded).