Analytik Jena AlphaSC Samplerblock Thermal Cycler Lab

This Applied Biosystems Abi Prism Model 7000 PCR Sequence Detection System was removed from a univer (more)sity lab where it was surplus to requirements. This was removed from a university lab where it was surplus to requirements. The unit powers up and has passed all self-tests. It is in good working order. It comes with a Dell Optiplex PC, Keyboard & Mouse.The PC has a fresh install of Windows XP and it is running AB SDS 1.2.3. There is a 96-Well 5mm Thermal Cycler Block in it.

Techne TC-3000G PCR Thermal Cycler New equipment (never used) The world's smallest gradient cycler,  (more)the TC-3000G will hold half a 96-well plate, in a horizontal format so that it offers 8 columns for annealing temperature optimisation and 6 rows for optimising reagents such as MgCl2 and primer concentrations. Annealing temperatures can be optimised over a 15°C gradient between the temperatures of 20 and 80°C. Gradient block - A gradient of up to 15°C between the temperatures of 20 and 80°C can be set, allowing any protocol to be optimised within a single experiement. New software - Enables a gradient to be added to any temperature step of the program. Gradient calculator - The gradient calculator function displays the temperature for each of the 8 columns, ensuring easy replication of thermal conditions.

SCILOGEX EZee Mini-Centrifuge, Green Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 StripsEZee mini cen (more)trifuges are ideal for microfiltration and quick spin downs from the walls and caps of microcentrifuge tubes. The compact design takes up less than six inches of bench space. Easy open clear colored lids are available in four colors. Simply close the lid for acceleration and open the lid for deceleration, or alternatively use the on/off switch.Product Features - Available in two colors i.e., green, blue - Easy-to-use with dual start/stop function. - Maximum speed 7000rpm/2680xg - Supplied with an 8 place 1.5/2.0ml microtube rotor and 16 x PCR tube rotor & 0.2/0.5ml tube adapters. - Compact design - Whisper quiet operation, noise level ≤ 45dB - Ideal for quick spin downs of microtubes and PCR tubes - Simply close the lid for acceleration and open the lid for deceleration or use the on/off switch. - Accelerates and brakes in seconds. - Universal voltage - Rotors change without tools. Click Here to View Product Video INCLUDED: The SCILOGEX EZee Mini-Centrifuge, Green Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips includes: - Power Cord - Two Year Manufacturer's Warranty

Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump Max. Gel Dimensions (W x L) 33 x 44 cm Heater (more) Output Power 800 W Ultimate Pressure VP200 Vacuum Pump 9 mbar Features - Rapid and even gel drying with a dry-heat vacuum method - Thermostatically controlled 800W heater for consistent operation - Independent 575W pump outlet for efficient vacuum performance - Complete system includes GD2000 Gel Dryer, VP200 Vacuum Pump, and all essential accessories - Indoor operating conditions: 15-40°C with humidity up to 80% for 15-31°C, reducing to 50% at 31-40°C - Stainless steel screen and porous polyethylene cover sheet for effective gel drying - Complies with EN61010-1, UL61010A-1, CSA22.2 1010.1, and CE safety certifications The Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump provides a fast, efficient, and safe solution for drying gels through a dry-heat vacuum method. This system ensures rapid and even drying with minimal risk of gel distortion or cracking. Equipped with a powerful, thermostatically controlled 800W heater, the GD2000 maintains consistent temperature levels to achieve high-quality results. The complete system includes the VP200 Vacuum Pump, stainless steel screen, porous polyethylene cover sheet, Mylar® and cellophane sheets, and other essential accessories for effective and reliable operation. Designed for indoor use within a 15-40°C temperature range, the GD2000 is compatible with high humidity environments up to 80% (gradually decreasing to 50% at 31-40°C). Built with safety in mind, this system meets EN61010-1, UL61010A-1, CSA22.2 1010.1, and CE safety standards, making it a durable and compliant choice for precise gel drying needs. INCLUDED: The Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump includes: - Silicone Rubber Overlay Sheet - VP200 Vacuum Pump - Stainless Steel Screen - Porous Polyethylene Cover Sheet - Vacuum Tubing–3 m - Porous Cellophane–50 sheets - Mylar® Cover Sheet - Filter Paper–10 sheets - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

F1 Mass Standard - knob weights with adjustment chamber - set (1 mg - 2 kg), wooden box Number of pi (more)eces in the set: 27 Weights 1 g i 2 g – solid masses without adjusting chamber

Radwag laboratory holders have been designed to facilitate faster and more convenient weighing. They (more) ensure perfect and safe fixing of small vessels of typical and non-standard shapes. Features: Maximum weighing ergonomics Direct dosing of a sample into a vessel High efficiency, lower costs (minimized potential loss of samples during transfer) Direct dosing of samples into various vessels (test tubes, round flasks, flat flasks, plastic test-tubes, titration vessels) Laboratory holders are compatible with all Radwag analytical balances. Intended use: glass and plastic tubes - ø8, ø10 and ø12 mm

Ohaus e-A51ST040 Achiever 5000 Overhead Stirrer, 115/230V Speed Range 30 rpm to 2,000 rpm Capacity 2 (more)5 L Maximum Viscosity 25,000 mPas Features - Powerful mixing and constant speed is assured with the brushless motor and torque compensation technology - Delivers accurate, controlled stirring of viscous liquids with quiet operation. - Simplify set up with the Keyless Chuck - no tools required. - Change shafts quickly and easily with one handed operation. This unique design will save time and effort for everyone in the lab. - Designed for safety. The lock button prevents accidental speed changes and the motor’s overload sensing technology simply shuts off stirring before an overload condition occurs to protect the sample. - Compact and easy to use. - Simple knob control combined with the bright digital display allows for precise setting and monitoring. - Customize for your application with over 12 accessories. The OHAUS e-A51ST040 Achiever 5000™ Overhead Stirrer is designed for powerful, precise stirring, safety, and simplicity in your lab applications. The A51ST040is a versatile overhead stirrer ideal for various applications in laboratories across industries like food & beverage, cosmetics, paints & coatings, pharmaceuticals, and more. INCLUDED: The Ohaus e-A51ST040 Achiever 5000 Overhead Stirrer, 115/230V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex MicroPette Plus 12-Channel Autoclavable Pipettor, 0.5-10μlThe MicroPette Plus pipettes are  (more)fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Plus 12-Channel Autoclavable Pipettor, 0.5-10μl includes: - Two Year Manufacturer's Warranty

Dimensions (WxHxD): 600 x 600 x 580 mm