Skatron SkanWASHER 300 Microplate Washer

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Titertek Microplate Washer S8/12  Cat no. 78-402-00 was removed from a university lab wher (more)e it was surplus to requirements. The item powers on but we were unable to test it further It is in a reasonable, used cosmetic condition with marks from use and age.

Agilent BioTek EL406 Microplate Washer Dispenser with BioStack 3 Stacker This system was removed fro (more)m a university laboratory where it was surplus to requirements. All included units are in good cosmetic condition and power on, we are unable to conduct further testing at our facility. The lab confirmed it had been serviced prior to them purchasing, but they never used it. EL406 Microplate Washer: - Powers on. - Version: 1.71. - Fair cosmetic condition. Pump (Model: Vacuubrand 8): - Powers on and is fully functional. - Fair cosmetic condition. - Serial No.: 42962805. BioStack 3 Stacker: - Powers on. - Arm and automatic tray operate as expected when powered. - Further testing not possible. - Fair cosmetic condition. - Serial No.: 17072111. Includes: - 5x Empty bottles. - Plugs and cables. - Silicone tubes for bottles. - Liquid handling control software. - 2x Boxes of Dispense Cassettes. - Pump instruction manual.

Microplate type: 96-well Onboard Software: Create, edit and run multiple protocols Soaking: Programm (more)able up to 60 minutes Volume range: 50 to 3000 microliter increments Wash cycles: 1 – 10 Dispense precision: ≤3% CV: 300 µL/well Residual volume: <2 µL/well Wash speed: 96-wells, 300 µL/well, 3 cycles: <30 seconds Vacuum filtration: 5 to 999 seconds Including vacuum pump

This Dynex Technologies Wave 100 &nbsp;Microtiter Plate Washer was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up (PSU not included) but we were unable to test it further. It is in good cosmetic condition with marks from use.

This Biotrak ll Plate Washer 4 was removed from a university lab where it was surplus to requirement (more)s. The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

CLIMATE CHAMBERS KK SMART PRO POL-EKO KK - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed witho (more)ut compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 60°C and thanks to an ultrasonic humidifier, they regulate humidity from 30% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm - Available with FIT: phytosystem – day and night simulation with intensity control. To find out more, download our informative pdf: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. NOTE: the temperature range that can be used with FIT active is +10°C... +50°C. KK SMART PRO SERIES POL-EKO offers 9 climatic chamber models with capacities from 109 to 1485 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). ULTRASONIC HUMIDIFIER Climatic chambers with ultrasonic humidifier are professional and reliable tools to guarantee stable and precise conditions. The maximum temperature of 60°C allows it to be used for seed germination, mushroom and plant cultivation or for food testing. The perfect climatic conditions allow stability testing of pharmaceutical and cosmetic products, as well as packaging and electronics. NOTE: For the KK series, deionized water (1 μS/cm) must be used. Feed water source: deionized water tank; deionizer; internal deionized water network. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System.. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Phitotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory.

Panasonic AW-HE50 CCTV Cameras This item was removed from a university lab where it was surplus to r (more)equirements. It is in good cosmetic condition and powers on. The previous client has stated it was in full working order prior to removal. This item was tested with an in-house power supply cable. (not included.)

Sigma 4K10 Refrigerated Centrifuge This item was removed from a university where it was surplus to r (more)equirement. It is in good cosmetic condition internally and externally. It powers on and is in good working order when set to low temperatures, it did however remain at 26˚c when set to 37ºc. The Unit comes with 3 Different Rotors No. 1: Sigma Rotor Swing-out rotor Nr. 11140-G=960 g-5500/min-4 x 284 Bucket-12 x sample holders (3 sets of 4 ) No. 2: Sigma Rotor Nr. 12167-13000/min-G=86g No. 3: Sigma Angle Rotor 12166-No info.

Memmert IN450plus Natural Convection Incubator 449L, 115V Setting Temperature Range +20 to +80°C Co (more)nvection Type Natural Convection Chamber Volume 449 L (15.9 cu.ft.) Features - Setting temperature range from +20 to +80°C with a working range at least 5°C above ambient - Internal volume of 449 L (15.9 cu.ft.) for large capacity applications - Precise temperature control with 0.1°C setting resolution using 2 Pt100 sensors DIN Class A in a 4-wire circuit - ControlCOCKPIT with TwinDISPLAY offers advanced PID-microprocessor control and two high-definition TFT-color displays - Natural convection with adjustable pre-heated fresh air admixture through electronically controlled air flap - Digital timer with backwards counting, adjustable from 1 minute to 99 days - Two stainless steel, electropolished grids, with a max chamber load of 661 lbs (300 kg) - AtmoCONTROL software for data logging and program management via USB or Ethernet interface The Memmert IN450plus Natural Convection Incubator 449L, 115V is engineered for precise temperature control and optimal efficiency, making it an ideal choice for various laboratory applications. With an internal volume of 449 liters (15.9 cubic feet), this large-capacity incubator provides ample space for accommodating multiple samples and materials. The ControlCOCKPIT TwinDISPLAY system features an adaptive digital PID-microprocessor controller with dual high-definition TFT-color displays, enabling users to precisely set and monitor temperatures. The incubator's temperature range of +20 to +80°C, combined with a 0.1°C resolution, ensures highly accurate thermal conditions. Dual Pt100 sensors in a 4-wire circuit provide additional temperature monitoring, automatically taking over if an error is detected. Designed for flexibility and safety, the IN450plus offers advanced features like the HeatBALANCE function, which allows adjustments to the heating distribution between the upper and lower circuits from -50% to +50%, ensuring consistent temperature uniformity. Natural convection, combined with electronically controlled air flap adjustments, facilitates an even admixture of pre-heated fresh air. The unit is equipped with comprehensive safety measures such as AutoSAFETY and adjustable overtemperature monitors. Additionally, the AtmoCONTROL software offers intuitive programming and data logging capabilities via USB or Ethernet, making it simple to store and manage programs even in the event of a power failure. Built with a robust stainless steel interior and reinforced with deep-drawn ribbing, this incubator is both durable and easy to clean, making it a reliable choice for rigorous laboratory environments. INCLUDED: TheMemmert IN450plus Natural Convection Incubator 449L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty