Tecan LS Reloaded Microarray Scanner 2..40 μm 48 Slides (2014) + Software V1.7 Laser Green 532nm

Agilent Technologies DNA MicroArray Scanner Lab This item was removed from a university where it was (more) surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item also includes the following: - 1 x Box of Qty. 5 Slide Holders - 2 x G2539A Hybridisation Chamber

This Axon Instruments GenePix 4000A Microarray Scanner was removed from a university lab where it wa (more)s surplus to requirements. We were unable to test the item as it requires a specific power supply which we don't have. It is in a reasonable used cosmetic condition with marks from use.

Packard Biochip Technologies ScanArray Lite Micro Array This was removed from a university lab where (more) it was surplus to requirements. The unit powers up but has not been tested further. The lab confirmed it was working prior to removal. It is in great cosmetic condition with only minor marks. The power lead is included.

GenePix 4300A MicroArray Scanners Lab This item was removed from a university where it was surplus t (more)o requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

This Ciphergen ProteinChip System Series 4000 was removed from a university lab where it was surplus (more) to requirements. This item is in good cosmetic condition and powers up, unable to test further at our facility. Accessories included: The Unit comes with a lot of new ProteinChip Arrays however they are Out Of Date from 2006-2008 CM10 ProteinChip Array 12 Pack (27-09-07) - 12 Boxes and 1 in the Plastic sleeve + 1 Bio Rad 12 PackCat No. - C573-0075 Q10 ProteinChip Array 12 Pack (08-09-07) - 12 Boxes + 1 Bio Rad 12 PackCat No. - C573-0080 IMAC30 ProteinChip Array 12 Pack (01-12-06) - 19 Boxes and 6 in the Plastic sleeve + 1 Bio Rad 12 PackCat No. - C573-0078 NP20 ProteinChip Array 12 Pack (06-09-07) - 4 BoxesCat No. - C573-0043 H50 ProteinChip Array 12 Pack (27-09-07) - 2 Boxes and 3 in the Plastic sleeve + 1 Bio Rad 12 PackCat No. - C573-0065 1 X Ciphergen Energy Absorbing Molecules (EAM)(31-07-06)Cat No. - C300-0001 1 X Ciphergen 96 Well Reservoir Cassette CompatibleCat No. - C503-0012 4 X Ciphergen Sample Holders  1 X Bio Rad Sample Holders 4 X Blank Sample Holders

This Sanyo Laboratory Incubator Model - MIR-154 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. Inside dimensions - L33 x W62 x H50cm2 Shelves 60 x 31cm Everything is in reasonably good cosmetic condition with marks from use.

VACUUBRAND MD 4C NT +AK SYNCHRO+EK Chemistry Vacuum System Ultimate Vacuum 1.5 mbar Max. pumping s (more)peed at 60 Hz 2.2 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Simultaneous operation of two independent vacuum applications, with reliable check valves to prevent interference between systems - Excellent environmental friendliness due to efficient solvent recovery This chemistry vacuum system provides the simultaneous operation of two processes with only one pump. Typical applications are rotary evaporators, vacuum concentrators and vacuum drying ovens. Each vacuum connection is provided with a manual valve to regulate the effective flow at each port. The MD 4C NT pump offers more than sufficient pumping speed also for the parallel operation of two challenging applications. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment.INCLUDED: The VACUUBRAND MD 4C NT +AK SYNCHRO+EK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

Eppendorf 27 x 5ml & 15ml Adapters, Cat. #: 5920716000 The Eppendorf 27 x 5ml & 15ml Adapter (more)s, Cat. #: 5920716000 are for use with the Eppendorf S-4x1000 Rotors. These adapters feature a capacity for 27 x 5 & 15ml conical tubes each with the maximum tube dimensions (Diameter x Height) of 17mm x 121mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 7 x 50ml Adapters, Cat. #: 5825733002 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 27 x 5ml & 15ml Adapters, Cat. #: 5920716000Bottom ShapeConicalRotor CompatibilityS-4x1000 Swing Bucket Rotor

Accuris myGel Mini Electrophoresis System The myGel mini gel box attaches directly to the power supp (more)ly for a secure connection everytime. Selectable parameters include 3 preset voltages – 35V, 50V or 100V – and a 99 minute timer. All are set using the memberane keypad. The safety lid is vented to help dissipate heat generated during electrophoresis, and features a viewing area above the gel. Current will only run through the system when the lid is properly in place on top of the gel box. Trays and casting stands for both 10.5 x 6cm and 5 x 6cm gels are included with the myGel Mini system, as are double-sided combs. The smaller tooth combs are compatible with multichannel pipettes. Casting is quick and easy – just place the tray in the casting stand and pour. The trays feature a dark contrast strip to help visualize wells while loading and lines that fluoresce under UV and blue light to track progress of the run.INCLUDED: The Accuris myGel Mini Electrophoresis System includes: - Gel Tank - Power Supply - Two Casting Sets for 10.5 x 6cm and 5 x 6cm - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty