Agilent Technologies DNA MicroArray Scanner G2539A Lab

Illumina BeadArray Reader PN 11182031 This was removed from a university lab where it was surplus to (more) requirements. The unit powers up but we were unable to test it further. Model: BeadArray ReaderSerial#: S387Part#: 11182031Date: 2007-01

Axon Instruments Genepix Personal 4100A Microarray Scanner This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up but has not been tested further. It is in great cosmetic condition with only minor marks.

This Irori AccuTag 100 Scanning Station  Model: At-100-CS-CE was removed from a university lab  (more)where it was surplus to requirements. The item is in reasonable cosmetic condition. There are scratches/dents on the surface, along with stains. The accessories have been used and thus have broken seals. The item was plugged in, but there wasn't any clear indication it had powered on. We were unable to test it further without a PC connection. Also included are the following:1x AccuTag Synthesis Manager Version 1.01x AccuTag Synthesis Manager Version 2.2612x Irori Radio Frequency Tag1x PSU1x DE-9 cable

Packard Biochip Technologies ScanArray Lite Micro Array This was removed from a university lab where (more) it was surplus to requirements. The unit powers up but has not been tested further. The lab confirmed it was working prior to removal. It is in great cosmetic condition with only minor marks. The power lead is included.

This Ciphergen ProteinChip System Series 4000 was removed from a university lab where it was surplus (more) to requirements. This item is in good cosmetic condition and powers up, unable to test further at our facility. Accessories included: The Unit comes with a lot of new ProteinChip Arrays however they are Out Of Date from 2006-2008 CM10 ProteinChip Array 12 Pack (27-09-07) - 12 Boxes and 1 in the Plastic sleeve + 1 Bio Rad 12 PackCat No. - C573-0075 Q10 ProteinChip Array 12 Pack (08-09-07) - 12 Boxes + 1 Bio Rad 12 PackCat No. - C573-0080 IMAC30 ProteinChip Array 12 Pack (01-12-06) - 19 Boxes and 6 in the Plastic sleeve + 1 Bio Rad 12 PackCat No. - C573-0078 NP20 ProteinChip Array 12 Pack (06-09-07) - 4 BoxesCat No. - C573-0043 H50 ProteinChip Array 12 Pack (27-09-07) - 2 Boxes and 3 in the Plastic sleeve + 1 Bio Rad 12 PackCat No. - C573-0065 1 X Ciphergen Energy Absorbing Molecules (EAM)(31-07-06)Cat No. - C300-0001 1 X Ciphergen 96 Well Reservoir Cassette CompatibleCat No. - C503-0012 4 X Ciphergen Sample Holders  1 X Bio Rad Sample Holders 4 X Blank Sample Holders

This listing is for a Perkin Elmer Lambda 35 Spectrophotometer.The unit is in full working condition (more) and is ready for immediate release. The PerkinElmer Lambda 35 UV/Vis Spectrophotometer offers the best solution for measurement on solids, pastes and powders. It supports Double-Beam Operation. Variable bandwidth is from 0.5 nm to 4 nm. LAMBDA systems are easy to operate and deliver results that you can trust,with minimal training for operators. Using LAMBDA system, it’s easy to develop simple, robust methods and make sure you follow them without making mistakes. And, no matter what LAMBDA system you choose, your daily UV/Vis analysis will be faster, simpler, and more reliable than ever. Wavelength range: 190-1100 nm Weight: 25 kg (57 lbs.) Wavelength absorbance range: 3 to 4 A Wavelength accuracy: ±0.1 nm Stray light: <0.01% at 220 nm Bandwidth: 1 nm, fixed for Model 25, 0.5û4 nm, variable for Model 35 Photometric accuracy: ±0.001 A Dimensions: 65W x 56D x 23.3H cm (25 x 22 x 9″)

The MJ Research PTC-100 Thermal Cyler is a robust thermocycler that operates with 96-well microplate (more)s. This thermocycler is reliable and easy-to-use, while also offering various temperature configurations from 0°C to 105°C with temp accuracy of ± 0.3°C. The PTC-100 has a heated lid for oil-free operation, which allows for convenient pressure and height adjustment via a thumbwheel. Crafted to withstand repeated cycling, the PTC-100 thermocycler can follow any temperature sequence up to 10,000 times and can store material indefinitely at any temperature, allowing for highly accurate incubation rates. The MJ Research PTC-100 can store approximately 320 programs and comes with 14 pre-programmed protocols. Due to the PTC’s power-failure protection feature, data is safe after power interruption for up to twelve hours. Thermal Range: 0°C – 105°C Accuracy: ±0.5°C of programmed target at 60°C Thermal Uniformity: ±0.4°C well-to-well within 30 sec of arrival at 60°C Ramping rate: up to 1.2°C/sec Sample Capacity: 96 x 0.2 ml tubes or one 96-well plate

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315&rsquo;s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean &ndash; operator does not touch moisture analyzer&rsquo;s housing. Removing any shocks caused by manual closing of the chamber &ndash; the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and &ndash; thanks to databases &ndash; particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5&rdquo; capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M &ndash; the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D &ndash; the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R &ndash; the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g &ndash; the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.