Thermo Scientific Heracell 240i CO2 Incubator Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

The Innova CO-170 CO₂ incubator is designed to provide stable and homogeneous atmosphere required fo (more)r cell culture by controlling temperature, carbon dioxide and optionally oxygen for cultivating samples and cells from biological laboratories. The fan-less design offers more usable space and eliminates the fan, reducing contamination. A six-sided direct heating system provides a uniform incubated environment to gently bathe cells, and the deep-drawn, stainless-steel chamber eliminates seams or welds and allows easy cleaning. Temperature range: Ambient +4°C to 50°C Temperature control increments: 0.1°C Temperature stability (at 37°C): ± 0.1°C Required gas pressure: 0.05 MPa (0.5 bar/7.2 psi) Humidity control (at 37°C): 95% Reservoir capacity: 2.5 Liters Volume: 170 L Dimensions: (WxHxD): 686 x 846 x 701 mm Interior dimensions: (WxHxD): 538 x 691 x 445 mm Weight: 83 kg

This system measures the growth of micro-organisms. This system features a unique incubator incorpor (more)ating a liquid circulation heat exchanger which provides constant temperatures to all wells, a linear shaker to assure good mixing in each well, a sensitive reader that measures turbidity, a technique more sensitive than a spectrophotometer. Additionally, the system is equipped with 8 filters to measure specific wavelengths, two covered honeycomb plates may be run at one time that makes it possible to run 200 samples simultaneously. Linear range: 0.0 – 2.0 A (max deviation <2%) Noise: max 0.002 A at 0.0 A Drift: max 0.003 A Resolution: 0.001 A Warm-up time: 30 min Light source: Quartz-Halogen lamp 8V/50W Filters: 405, 420, 450, 492, 540, 580, 600 nm and wide band filter 420 – 580 nm Half band with: 3 – 10 nm Detector: Silicon photocell Microplate type: Honeycomb 2 microplate, 100 wells per plate Capacity: 1 – 2 microplates Maximum volume: 400 µL/well Incubating temperature: 1.0 – 60.0°C, selectable with steps of 0.1°C. (Depends on the ambient temperatue. Bioscreen can go 6°C below or 30°C above ambient temperature up to a max of 60°C) Temperature uniformity: ± 0.1°C Heating time from 20°C to 30°C: 30 min Heat transfer fluid required: Mixture of ethylene glycol and water 1:1 Dimensions (WxDxH): 620 x 380 x 230 mm Weight: 22 kg

PHCBI Cooled Incubator MIR-154 Lab This item was removed from a university where it was surplus to r (more)equirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally.

Yamato IN-604-115V Refrigerated Incubator Programmable 143L, 115V Refrigerant R134A Operating Temp (more)erature Range Ambient +10-50°C Temperature Accuracy ±0.3°C Features - High accuracy temperature control and temperature distribution - Inner glass door keeps temperature stable during sample observation - Made of Stainless steel (exterior) and Chrome free electronic galvanized plated steel plate chemical proof baking finish (interior) - Includes Self diagnostic function - Comes with 1 Year Manufacturer's Warranty

Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V Temperature Range 0°C (at  (more)least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 749L (26.5 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP750eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP750eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP750eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP1400eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP1400eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP1400eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V includes: - 4 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Water and gas connections Dimensions (WxDxH): 1250 x 765 x 960 mm

ASTEC Sensair BFC-10 Fume Hood with Cabinet This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and is in good working order, but an alarm sounds as it's overdue a service. It is in good cosmetic condition with minor marks.

F2 Mass Standard - slotted weights. Nominal value - 5 g.

Ohaus FC5718 Frontier Multi-Pro Centrifuge w/ Selectable Rotor Speed Range 200 to 18,000 RPM Maximum (more) Capacity 4 x 100ml Warranty 2 Year Manufacturer's Features - Automatic rotor identification makes switching between applications extremely easy - Simple one-hand operation enabled by the selection button/rotary knob combination—even with gloves on - Large backlit LCD display shows centrifugation settings and real-time parameters on one interface - Program storage up to 99 runs including parameter settings and rotor types - Maintenance-free induction drive - Thread-free rotor locking mechanism - Optimized airflow system to keep samples cool (non-refrigerated models) - Chemical and corrosion-resistant stainless-steel housing ensures durability in lab environments - Self-diagnostic program to record usage and error history for easy maintenance and to minimize downtime - Over-speed protection, immediately upon rotor insertion - Active imbalance-detection with individual imbalance tolerances set for each rotor - Motorized lid-locking system to protect operators from accidental injuries - Sealed and bio-containment rotors to safeguard operators from harmful aerosols Click Here to View Product Video The Ohaus Frontier 5000 Series Multi-Pro Centrifuges are designed for universal use in multiple applications in research, industrial, and clinical laboratories and can be combined with a range of rotors and accessories for customized use. These centrifuges are available in 7 models with capacities from 0.2ml to 4 × 750 ml - and feature high speed performance at maximum volume, automatic rotor identification and safety features. These multi-purpose centrifuges offer a high-speed centrifugation platform which can be customized to fit workflow needs using a wide variety of rotors and accessories. The intuitive design of the centrifuges &amp; accessories enables easy access to parameter settings, and quick rotation between applications. The performance of these centrifuges is propelled by German engineering, and high-quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use. The Frontier 5000 Series is equipped with protective features, including automatic overspeed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5718 Frontier Multi-Pro Centrifuge w/ Selectable Rotor includes: - FC5718 Frontier Multi-Pro Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA RT 5 Multiposition Magnetic Hotplate Stirrer Stirring Positions 5 Positions Speed Range 0 to 1, (more)000 RPM Heating Temp. Range Room Temp. to 120°C Features - Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer. - Safety circuit limits max. temp. independently of set point. - Heating function switches off if temp. limit exceeded. - Set safety temp. of heating plate remains available. - Hotplate temp. displayed on RCT. - Contact thermometer display can be placed at eye level. The IKA RT 5 Multiposition Magnetic Hotplate Stirrer is a 5-position digital stirrer designed for synchronous heating and stirring. It combines the RCT basic magnetic stirrer with the ETS-D5 contact thermometer, featuring a safety circuit to limit maximum temperature independently of the set point. The heating function switches off if the temperature limit is exceeded, ensuring safety. With magnetic coil technology, it provides noiseless and consistent stirring up to 1000 rpm, and its surface temperature is adjustable up to 120 °C. It supports a maximum stirring quantity of 0.4 liters per position (H2O). The stirrer has a durable aluminum alloy set-up plate measuring 110 x 495 mm, and the unit measures 120 x 60 x 610 mm, weighing 4 kg. Suitable for continuous operation, it includes an adjustable safety circuit (50 - 150 °C), operates within 5 - 40 °C, and has an IP 40 protection class.