IKA KS 3000ic Incubator Shaker

This Thermo Scientific MaxQ 6000 Incubator Shaker Model - 4360 was removed from a university la (more)b where it was surplus to requirements. The unit has a power board fault. It is in reasonably good cosmetic condition with some marks from use. The door also does not close properly. Internal dimensions - D52 x W55 x H67cm1 Shelf - 52 x 54cmShaker Plate - 45 x 45cm It is sold for spares or repairs due to the electrical fault.

This New Brunswick Innova 4330 Incubator Shaker was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but does not shake. The heating and cooling functions work. It is in reasonably good cosmetic condition with minor marks.

Thermo Scientific MaxQ 4000 Analog Incubator Shaker This was removed from a university lab where it (more) was surplus to requirements. The unit would not power up and tripped the electrics during testing. We believe the motor controller is faulty. The gas struts for the lid have also failed. It is in otherwise good cosmetic condition with marks from use.

Sanyo MIR-553 Incubator This was removed from a university lab where it was surplus to requirements. (more) The unit powers up but the power relay is short circuited so it runs overtemp. It is sold for spares/repairs.

Memmert IF30plus Forced Circulation Incubator 32L, 115V Working Temperature Range Min. 10°C above a (more)mbient up to +80°C Convection Type Forced Air Chamber Volume 32 L (1.1 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 32 L (1.1 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF30plus Forced Circulation Incubator 32L, 115V is a reliable solution for precise temperature control in laboratory environments. With a setting temperature range from +20°C to +80°C and an impressive accuracy of 0.1°C, this incubator ensures consistent and uniform heating for sensitive applications. Its 32L (1.1 cu.ft.) capacity, combined with a reinforced stainless steel interior, provides ample space for diverse sample types while maintaining easy-to-clean surfaces. The advanced ControlCOCKPIT twin display system offers an intuitive interface with dual high-definition TFT-color interfaces, enabling seamless control over critical parameters such as temperature, fan speed, and air flap position. The forced air circulation system, adjustable in 10% steps, ensures optimal airflow and uniform heating. Safety is at the core of the Memmert IF30plus design, featuring AutoSAFETY systems with integrated over- and undertemperature monitors to protect samples and equipment. The incubator is equipped with dual Pt100 sensors for mutual temperature monitoring and performance assurance, while the adjustable overtemperature monitor and mechanical temperature limiter (TB) comply with DIN 12880 standards. Additional features include a sterilization program for the chamber, function SetpointWAIT to ensure the process only begins once the target temperature is reached, and built-in audible and visual alarms to enhance operational safety. The durable stainless steel construction ensures long-term reliability, making this incubator ideal for a wide range of lab applications. INCLUDED: The Memmert IF30plus Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Fusion UV DRSE 120 UV Coating System Lab This system was removed from a university where it was surp (more)lus to requirement. All units are in good cosmetic condition and powered on, however the Conveyor belt motor runs independently but not when connected to the main unit. The UV lights are not working and the power supply is showing error codes related to interlock and RF detector issues. Due to the faults stated above, this system is listed as Spares/Repair. This system comprises the following: - Fusion UV DRSE 120 UV Coating System - Fusion Systems Power Supply P150 - Fusion Systems Model I250B - Fusion Systems Blower K523/2 - 2 x Fusion UV Magnetron 554172 (New in Original Packaging) - Fusion UV Variable Power Supply

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and both the incubation and CO2 function have been tested. It is in good working order (Temp & CO2 sensor not included). It is in reasonable cosmetic condition but has seen some heavy use on the inside. It is purely cosmetic though.

IKA Pette Vario 1 - 10ml Pipette Features - Improved ergonomics as a result of replaceable handles  (more)ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 1 - 10ml Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 1 - 10ml Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range1 - 10mlIncrements10 µlAccuracy (Nominal Volume µl / %) ± 60 µl / 0.6%Precision (Nominal Volume µl / %)± 15 µl / 0.15%Accuracy (50% of Nominal Volume µl / %)± 40 µl / 0.8%Precision (50% of Nominal Volume µl / %)± 10 µl / 0.2%Accuracy (10% of Nominal Volume µl / %)± 30 µl / 3%Precision (10% of Nominal Volume µl / %)± 6 µl / 0.6%

Zoom ratio 8.5:1 Focussing range 50 mm Headpiece 45° inclined, interpupillary distance 50 – 76 mm Di (more)stortion free objective, 1X: N.A. 0.084, W.D. 81 mm Widefield eyepiece, high eyepoint, F.N. 24, diopter lock mechanism, build in double cross line Transparent stage plate Illumination mode: high contrast, low contrast and oblique illumination Illumination area Ø 40 mm

The uScopeMXII digital microscope produces high-quality images while allowing you to scan a region o (more)f interest. This digital workhorse offers unprecedented capability in a form factor ideal for desktop PC users. A little larger than an external hard drive, the uScopeMXII delivers high-resolution digital images from standard glass slides. Illumination: LED (White) Camera Resolution: 960×540 Field Image Format: JPEG, PNG (lossless) Scanned Image Capture: Single Field, Tiled Fields, Overlapped Fields, Underlapped Fields Viewing Formats: Single Field, Tiled Fields, Deep Zoom Image Export Formats: JPG, BMP, PNG, TIFF

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).