Heidolph Incubator 1000 Heating Module

Memmert IF55plus Forced Circulation Incubator 53L, 115V Working Temperature Range Min. 10°C above a (more)mbient up to +80°C Convection Type Forced Air Chamber Volume 53 L (1.9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 53 L (1.9 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF55plus Forced Circulation Incubator 53L, 115V provides precise temperature control with a working temperature range from Min. 10°C above ambient up to +80°C and 0.1°C accuracy, ensuring reliable performance for various lab applications. Its 53 L (1.1 cu.ft.) stainless steel interior is easy to clean and reinforced for durability, while the TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with two high-definition TFT-color displays offers clear and intuitive control. The incubator features forced air circulation, adjustable in 10% steps, and pre-heated fresh air admixture to maintain uniform temperature throughout the chamber. Safety is prioritized with the inclusion of AutoSAFETY, which integrates over- and undertemperature monitoring, along with a mechanical temperature limiter (TB) for added protection. The Function SetpointWAIT ensures processes only begin once the set temperature is reached, enhancing experimental accuracy. Other key features include a fixed sterilization program for the chamber, autodiagnostic system for fault detection, and a fully insulated stainless steel door with 2-point locking, making it a dependable choice for sensitive laboratory processes. INCLUDED: The Memmert IF55plus Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF450 Forced Circulation Incubator 449L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 449 L (15.9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 449 L (15.9 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF450 Forced Circulation Incubator 449L, 115V offers precise temperature control with a setting range from +20°C to +80°C and a working range starting at Min. 10°C above ambient. Its large 449 L (15.9 cu.ft.) stainless steel interior, reinforced with deep drawn ribbing, ensures durability and easy cleaning, making it ideal for large-scale applications. The advanced ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display allows users to adjust various parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time, providing optimal control over the incubation process. This incubator features quiet forced air circulation with a turbine, adjustable in 10% increments, ensuring even temperature distribution and pre-heated fresh air admixture. Safety is ensured through an adjustable overtemperature monitor and mechanical temperature limiter TB, meeting DIN 12880 standards. Additional features include AtmoCONTROL software for advanced programming and data management, with support for up to 8 shelves and a maximum chamber load of 661 lbs. The IF450 combines high capacity, safety, and precision, making it suitable for demanding laboratory environments. INCLUDED: The Memmert IF450 Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA INC 125 FS SP25 Digital Incubator Shaker Temperature Range Ambient +8°C to 80°C Speed Range 10  (more)to 300 RPM Chamber Volume 125L Features - Shaking stroke: 25 mm for optimum oxygen input - The shaker platform can be pulled out halfway (with line indicator) for comfortable and tilt-proof loading - The threaded grid on the platform allows the mounting of fixing clips or STICKMAX adhesive mat for different vessels and sizes - When the door is opened, the shaking function stops automatically - Shaking and temperature control function can be used independently of each other - Simple cleaning of the interior thanks to rounded corners and flat surfaces made of corrosion-resistant material AISI 304 - Decontamination mode for disinfection and reduction of cross-contamination (100/120°C) - Excellent temperature management and optimized energy consumption thanks to very good insulation of the inner chamber and triple-glazed door with window - Internal air circulation can be influenced by electronically adjustable fan speed (0-100%) - Very large LCD display for easy reading - Large viewing window and switchable interior lighting for observation of samples - Counter, timer, and timer auto (temperature-controlled) function to ensure reproducible test conditions The IKA INC 125 FS SP25 Digital Incubator Shaker is the first incubator shaker with a patented removable shaker platform. Without the platform, the unit can be used like a normal incubator. The large inner chamber with a volume of 125 liters offers space for up to 6 grid shelves (without shaker platform). Thanks to high temperature stability and a uniform shaking motion that improves oxygenation, the incubator shaker is the perfect solution for cell cultivation and other microbiological applications. Click Here to View Product Video INCLUDED: The IKA INC 125 FS SP25 Digital Incubator Shaker includes: - Shaker Platform SP25 - IO T 2.10 Wire grid tray, chrome plated (2 pcs.) - Tilt Protection (2 pcs.) - USB A-B Cable - Calibration Certificate at 37°C - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Corning ACI oven / incubator

Temperature range: Ambient + 5°C to 80°C Temperatuur accuracy (at 37°C): ±0.1°C Indication: 0.1°C in (more)crements Alarm signal with temperature deviation: ±1°C Speed setting: 25 – 500 rpm Speed accuracy: ±1 rpm Stroke: 25 mm Indication: 1 rpm increments Alarm signal with speed deviation: ±5 rpm Dimensions (WxDxH): 559 x 762 x 610 mm Platform size: 460 x 460 mm Weight: 79.4 kg

Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V Setting Temperature Ran (more)ge Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 384 L (13.6 cu. ft.) Features - 384 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V is a high-capacity, energy-efficient incubator designed for precision temperature control in demanding laboratory environments. With a spacious 384-liter volume and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, it offers flexibility for a wide range of incubation applications. The Peltier heating and cooling system, featuring individually controlled upper and lower elements, ensures uniform and reliable temperature distribution. Enhanced control is provided by the ControlCOCKPIT with TwinDISPLAY, which includes a multifunctional PID-microprocessor controller with dual high-definition TFT-color displays. For precise timing, the SetpointWAIT function ensures that the process only begins once the set temperature is achieved. This incubator prioritizes safety and durability with an AutoSAFETY system, which includes over- and undertemperature monitors and visual and acoustic alarms. Constructed with a stainless steel interior and a textured stainless steel exterior, it is resistant to corrosion and easy to clean. Supporting up to 14 shelves and a maximum chamber load of 440 lbs, the IPP410ecoplus provides ample space for various sample sizes and types. Additional features, such as three freely selectable calibration points, an autodiagnostic system, and AtmoCONTROL software for advanced programmability, make it an indispensable tool for labs focused on efficiency, reliability, and sustainability. INCLUDED: The Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Radwag laboratory holders have been designed to facilitate faster and more convenient weighing. They (more) ensure perfect and safe fixing of small vessels of typical and non-standard shapes. Features: Maximum weighing ergonomics Direct dosing of a sample into a vessel High efficiency, lower costs (minimized potential loss of samples during transfer) Direct dosing of samples into various vessels (test tubes, round flasks, flat flasks, plastic test-tubes, titration vessels) Laboratory holders are compatible with all Radwag analytical balances. Intended use: glass and plastic tubes filters other vessels

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Labconco 120ml Complete Fast-Freeze FlaskCompleteFlask consists of 7542300 Flask Bottom, 7544200 Fla (more)sk Top and a supply offilter paper.Fast-FreezeFlasks attach with adapters to valve ports on Labconco Drying Chambers andManifolds. They are available in clear or amber-colored glass. A completeFast-Freeze Flask consists of a rubber top, glass bottom and a supply of filterpaper.Tops, bottomsand filter paper are available separately as replacement components. Adaptersare available in borosilicate glass or stainless steel. Fast-Freeze Flasks andAdapters are compatible with any brand freeze dryer that has 1/2" or3/4" diameter valve ports.Glass flaskswithstand maximum temperature of 490º C. Flask toppers withstand a maximumtemperature of 450º C. INCLUDED: The Labconco 7540300 120 ml Complete Fast-Freeze Flask includes: - Flask Bottom & Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson MINIPULS 3 Peristaltic Pump (Drive Unit Only), 110V/220VFeatures - Utilizes positive displace (more)ment pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds the MINIPULS 3 is exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateMINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible. (Please Note: A Pump Head is NOT INCLUDED and is required for operation, please inquire.) INCLUDED: The MINIPULS 3 Pump (Drive Unit) with One Channel, Standard Flow Head (R1) includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty