Benchmark H3550-45-SK Stacking kit for 45 liter incubator

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

This Binder CO2 Incubator Series CB CB 150 was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in good working order, but the screen flickers quite a bit. It is readable and usable. It was tested with a temperature and CO2 sensor (not included). Internal dimensions are: L44cm x W49cm x H60cm.

New Brunswick Innova 4400 Floor Standing Shaking Incubator Double Stack These were removed from a u (more)niversity lab where they were surplus to requirements. They have been fully tested to incubate and shake by a service engineer. They are in full working order. Inside dimensions - D57 W93 H44cmPlatform - 46 x 77cm They come with brackets for stacking, but there are only 3 feet and one of them is broken.

Thermo Scientific MaxQ 6000 Incubator Shaker SHKE6000-1CE This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up and has been extensively tested. It is in full working order. It is in good cosmetic condition with minor marks. This is the non-refrigerated model of this incubator.

Vortem 1550 Shaking Incubator LABNET New equipment (never used) Complete with racks for 50 mL and 15 (more) mL tubes, 230V Temperature Range: Ambient +5° to 99°C Temperature Accuracy: ±0.5°C Speed Range: 200 to 900 rpm Motion, Orbit: Circular, 3mm Timer 1 to 99 min or continuous Capacity: 18 x 15 mL tubes or 8 x 50 mL tubes Dimensions: 10.2 x 12.2 x 12.2 in. (26 x 31 x 31 cm) Electrical: 230V~, 50 Hz

Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 449 L (15.8 cu. ft.) Features - Setting temperature range from -12°C to +60°C - 449 L capacity for various laboratory applications - Equipped with inner glass door for visibility without compromising insulation - Precision temperature control with 2 Pt100 sensors, accuracy to 0.1°C - ControlCOCKPIT with TwinDISPLAY for easy programming and monitoring - Air jacket heating system ensures gentle and uniform all-around heating - Integrated AutoSAFETY with over- and undertemperature protection - Energy-efficient CFC-free cooling system with automatic defrosting The Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V is designed to deliver precise and reliable temperature control, with a setting range from -12°C to +60°C, making it ideal for sensitive applications that require exact environmental conditions. This 449 L capacity incubator features an inner glass door, allowing for clear visibility while maintaining insulation. TwinDISPLAY technology on the ControlCOCKPIT provides adaptive digital PID-microprocessor control with high-definition TFT-color displays, enabling seamless adjustments of temperature, fan speed, and program settings. With advanced safety features such as AutoSAFETY over- and undertemperature protection, visual and acoustic alarms, and dual Pt100 temperature sensors for accuracy to 0.1°C, the ICP450 offers optimal reliability. Its energy-efficient CFC-free cooling system includes an air jacket heating concept, ensuring gentle and uniform heating throughout the chamber. The incubator is equipped with AtmoCONTROL software for easy programming and data management, making it an exceptional choice for labs requiring consistent and versatile temperature management. INCLUDED: The Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software &amp; AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This Beckman Coulter JA-25.50 Fixed Angle Rotor was removed from a university lab where it was surpl (more)us to requirements. The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used. Capacity: 8 x 50 mLMax RPM: 25,000

Cytiva Xuri Cell Expansion System W25 Lab This system was removed from a university lab where it was (more) surplus to requirement. All units are in good cosmetic condition and powered up, we are unable to test the system further at our facility. The PC has no software but is included as it may have relevant hardware. This system comprises the following: Cytiva XuriTM Cell Expansion System W25 base unitCytiva Xuri Cell Expansion W25 PumpCytiva Xuri Cell Expansion W25 CBCU Dell Vostro PC, LG Flatron L1915S Monitor

Rousselet Robatel DRC 60 VX AY 1Sman Decanting Centrifuge This was removed from a laboratory where i (more)t was surplus to requirements. The system has not been tested as it has been disassembled to some degree.

Scilogex 2ml x 12 Composite Rotor with CoverThe Scilogex 2ml x 12 Composite Rotor with Cover has the (more) capacity to accomodate 12 x 1.5/2mL tubes and can a reach maximum speed of 15,000RPM. For use with the D2012 centrifuges. INCLUDED: The Scilogex 2ml x 12 Composite Rotor with Cover includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 15ml Conical Insert (2pk) The Hermle 15ml Inserts are for use with the 6 x 85ml Rotor for the (more) Z326 and Z326 K centrifuges. INCLUDED: The Hermle 15ml Conical Insert (2pk) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Amersham ECL Gel Box is a mini-gel system for high quality separation of proteins. Amersham ECL Gel  (more)is compatible with Tris-Glycine buffer and contain no SDS, makingit ideal for protein analysis under both native and denaturing conditions. Amersham ECL Gel is compatible with standard protein detection protocols.