Perkin Elmer AutoDELFIA Immunoassay System

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - 7” touchscreen with (more) easily accessible temperature display in the door handle - Minimal ice formation allowing for easy defrosting - NFC card/password protected door lock mechanism - USB port and SD card slot for easy export of -41°C setpoint data - Modular internal equipment - Easy access to lower drawers - High quality stainless steel and other materials for durability Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Intelligent automatic defrost technology that allows for a stable temperature during the defrost cycle - Automatic shutdown of the evaporator fans each time the door is opened to reduce heat transmission - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Insulated interior doors, sealed gaskets, improved frame to minimize cold air loss and heat conduction - Frost prevention which reduces the pressure on the compressor - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical sheet in Italian or in English for all the details.

Nikon Eclipse TE300 Inverted Fluorescence Microscope This item was removed from a university laborat (more)ory where it was surplus to requirements. It powers on using a power supply from a different item, but no power supply is included. Bulbs are in full working order. The item is in good cosmetic condition.As it is not a complete microscope, it is listed as Spares/Repair. The systems was professionally serviced and the following was discovered. • No evidence of salt corrosion detected.• DIC nosepiece present but objectives missing.• External power supply working & remote cable present.• Some damage to condenser lens (LWD 0.52) detected – not detrimental to image quality.• No phase or DIC modules present within condenser & no blanking plates fitted.• No fluorescence attachment or filter slider.• Focus spindle gear is cracked.• Some external shutters and filter wheels but incomplete.• Has an Orbit Monochromator controller – incomplete.• Missing stage plates.• Front photo port bung missing. Includes:- Nikon Condenser Turret Model#: Nikon LWD 0.52 - Nikon Binocular Head Serial#: 063482 No eyepieces or objectives are included. No bulb/light source is included. Model: TE300 TE-DH100WSerial No.: 413419

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.