Hoefer SE600X Chroma Deluxe Dual Cooled Vertical Protein Electrophoresis Basic Unit

The redesigned wide Mini-Sub Cell GT Electrophoresis Cell offers updated features that make electrop (more)horesis even easier. The wide Mini-Sub Cell GT Cell is suited for multiple-sample, rapid-screening applications. This popular system has a wide platform that can separate 30 samples per comb. The wide Mini-Sub Cell GT Cell is the same width as the Sub-Cell GT Cell, so the comb holder, combs, and 15 x 10 cm gel trays are interchangeable with the larger Sub-Cell GT units. All wide Mini-Sub Cell GT Systems accommodate ReadyAgarose Precast Gels to save time and allow highly reproducible separations. The cells include a buffer tank, a safety lid with cables, and a leveling bubble. Cell size (WxLxH): 178 x 255 x 68 mm Gel tray sizes (WxL): 150 x 70 mm ReadyAgarose gels accommodated: Yes, wide mini and 96 Plus formats Sample throughput: 10 – 60 Base buffer volume: ~650 ml Buffer recirculation: No Bromophenol blue migration: ~4.5 cm/hr (at 75 V)

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-41029 Box of glass test tubesITEM-24612 Boxed BOC Lab Series 8500 Multi Stage Co2 RegulatorITEM-41030 10 X Boxes 5ml reaction vesselsITEM-24613 Electrophoresis X cell sure lock casingITEM-24605 NTC Oxygen RegulatorITEM-24607 NTC Oxygen RegulatorITEM-24608 BOC Special Gases RegulatorITEM-24606 NTC Oxygen RegulatorITEM-24604 BOC Multi stage regulatorITEM-24609 GA SSO4 Oxygen RegulatorITEM-24610 GA SSO4 Oxygen RegulatorITEM-24614 Vollrath Water BathITEM-41511 Electrophoresis tanksITEM-24583 Box of RegulatorsITEM-24611 Bibby Hotplate StirrerITEM-24584 Box of regulatorsITEM-41512 Sala PulleyITEM-41513 FLEXILUX 300 & 600 Longlife unitsITEM-24587 MSE Micro Centaur PlusITEM-41514 IKA Vibramax VXRITEM-41515 IKA VIBRAMAX VXR BASICITEM-24585 MVD CCD video cameraITEM-41516 Box of electrophoresis tanksITEM-24586 Sanyo Digital CCD cameraITEM-41517 LKB 2197 Power supplyITEM-41518 Techne DB3ITEM-21720 Airflow TA 2 Anemometer ( in case)ITEM-21722 Edwards Pirani 11 GaugeITEM-21729 Edwards Monitorr 101 Edwards Penning 8ITEM-21731 New Brunswick Co2 LN2 Back up ModuleITEM-21718 BOC Nitrogen 300 bar InletITEM-21725 Genevac Pirani GaugeITEM-21728 WPI Nanoliter GaugeITEM-21724 Edwards Pirani 11 GaugeITEM-21733 Chell PDR-D-1 Pressure ReadoutITEM-21714 Freshford 230 bar inletITEM-21727 SGT Charcoal FilterITEM-21716 Boc HiQ InletITEM-21715 Freshford 300 bar inletITEM-41519 Grant Water BathITEM-41520 B&T Heater StirrerITEM-37162 Grant Water BathITEM-37163 ISOTECH IGC2231ITEM-21734 8x Mass Flow ControllersITEM-37164 Box of electrophoresisITEM-21732 Peak Scientific 12x SolenoidsITEM-37166 Prior microscopeITEM-37167 Nikon MicroscopeITEM-37168 Olympus MicroscopeITEM-37169 Electrophoresis Hood

Hoefer SE660 Tall Standard Dual Cooled Vertical Protein Electrophoresis Basic Unit Compatible Glass (more) Plate Sizes (W x H) 18 x 24 cm, 18 x 16 cm or 18 x 8 cm Maximum Power Settings 1000 V, 500 mA, 50 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 18 x 24 cm - Produce straight lanes and sharp,well-defined bands - Run up to four gels (maximum 112 samples) at one time under identical conditions - Run gels at uniform temperature from 1 to 45°C - Accommodates denaturing and native polyacrylamide gels and 2-D electrophoresis - A wide array of accessories allows you to tailor gel configurations to your needs - Choose from a wide variety of accessories The Hoefer SE660 Tall Standard Dual Cooled Vertical Protein Electrophoresis Basic Unit is a powerful and versatile system designed for labs seeking increased resolution through larger gel formats. This tall unit accommodates glass plates up to 18 x 24 cm, making it ideal for applications that require precise protein and nucleic acid separation. Equipped with dual cooling, the SE660 ensures sharp, well-defined bands across samples and allows for uniform temperature control ranging from 1 to 45°C, making it suitable for both denaturing and native polyacrylamide gels as well as 2-D electrophoresis. Designed to streamline workflows, the SE660 can run up to four gels simultaneously, with a capacity for as many as 112 samples under identical conditions. This unit's adaptable design and wide selection of accessories enable labs to tailor gel configurations based on specific research needs. Operating smoothly in standard lab environments, it handles temperatures up to 45°C and humidity levels up to 80%, with power settings reaching up to 1000 V and 500 mA, ensuring robust performance across diverse experimental setups. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber - Upper Buffer Chamber - Safety Lid w/High Voltage Leads - Heat Exchanger - Glass Plates 18 x 24 cm, 6 pcs - Clamp Assemblies, 8 cm, 4 pcs - Clamp Assemblies, 16 cm, 4 pcs - Cams, 6 pcs - Slotted Gaskets for Upper Buffer Chamber, 2 pcs - Dual Gel Casting Stand with Leveling Base - Bubble Level - Laminated Gaskets for Caster, 2 pcs - Buffer Dam - Spacer-Mate-Alignment Template - Wonder Wedge™-Plate Separation Tool - Gel Seal - Combs, 15-well, 1.5 mm thick, 2 pcs - Spacers, 1.5 mm thick (2 cm wide), 4 pcs - Lower Buffer Chamber INCLUDED: The Hoefer SE660 Tall Standard Dual Cooled Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber - Upper Buffer Chamber - Safety Lid w/High Voltage Leads - Heat Exchanger - Clamp Assemblies, 8 cm, 4 pcs - Clamp Assemblies, 16 cm, 4 pcs - Cams, 6 pcs - Slotted Gaskets for Upper Buffer Chamber, 2 pcs - Dual Gel Casting Stand with Leveling Base - Bubble Level - Buffer Dam - Spacer-Mate-Alignment Template - Wonder Wedge™-Plate Separation Tool - Gel Seal - Lower Buffer Chamber - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hoefer SE600 Standard Dual Cooled Vertical Protein Electrophoresis Basic Unit Compatible Glass Plat (more)e Sizes (W x H) 18 x 16 cm or 18 x 8 cm Maximum Power Settings 1000 V, 500 mA, 50 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 18 x 16 cm - Produce straight lanes and sharp, well defined bands - Run up to four gels (maximum 112 samples) at one time under identical conditions - Run gels at uniform temperature from 1 to 45°C - Accommodates denaturing and native polyacrylamide gels and 2-D electrophoresis - A wide array of accessories allows you to tailor gel configurations to your needs The Hoefer SE600 Standard Dual Cooled Vertical Protein Electrophoresis Basic Unit is an efficient, high-capacity system designed for versatile protein and nucleic acid analysis. This unit accommodates glass plates up to 18 x 16 cm, making it ideal for applications requiring precise and consistent separation. With dual cooling capabilities, the SE600 maintains uniform temperatures from 1 to 45°C, ensuring sharp, well-defined bands across all samples. Its adaptable design supports both denaturing and native polyacrylamide gels, as well as 2-D electrophoresis, offering flexibility for diverse lab requirements. Capable of running up to four gels simultaneously with a capacity for up to 112 samples, the SE600 is suited for high-throughput environments that demand reliable performance. Its range of compatible accessories allows labs to customize gel configurations based on specific needs, and its straightforward design simplifies assembly and operation. Operating effectively within standard lab conditions, it handles temperatures up to 45°C and humidity levels up to 80%, while power settings reaching 1000 V and 500 mA ensure robust performance across experimental setups. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber - Upper Buffer Chamber - Safety Lid w/High Voltage Leads - Heat Exchanger - Glass Plates 18 x 16 cm, 6 pcs - Clamp Assemblies, 16 cm, 4 pcs - Cams, 6 pcs - Slotted Gaskets for Upper Buffer Chamber, 2 pcs - Dual Gel Casting Stand with Leveling Base - Bubble Level - Laminated Gaskets for Caster, 2 pcs - Buffer Dam - Spacer-Mate Alignment Template - Wonder Wedge Plate Separation Tool - Gel Seal - Combs, 15-well, 1.5 mm thick, 2 pcs - Spacers, 1.5 mm thick, 2 cm wide, 4 pcs INCLUDED: The Hoefer SE600 Standard Dual Cooled Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber - Upper Buffer Chamber - Safety Lid w/High Voltage Leads - Heat Exchanger - Glass Plates 18 x 16 cm, 6 pcs - Clamp Assemblies, 16 cm, 4 pcs - Cams, 6 pcs - Slotted Gaskets for Upper Buffer Chamber, 2 pcs - Dual Gel Casting Stand with Leveling Base - Bubble Level - Laminated Gaskets for Caster, 2 pcs - Buffer Dam - Spacer-Mate Alignment Template - Wonder Wedge Plate Separation Tool - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis and Blotting Complete Unit Glass Pla (more)te Size (W x H) 10 x 10.5 cm or 10 x 8 cm Maximum Power Settings 1000 V, 500 mA, 50 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Quick, excellent results using minimal buffer - Passive cooling produces gels with straight lanes and sharp bands - Cast your own or use precast gels from a variety of manufacturers - Transfer up to 4 gels in 45 minutes with only 300 ml buffer using optional SE302 Blot Modules - Designed for use with a wide variety of precast gels The Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis and Blotting Complete Unit is a versatile and robust system designed to deliver high-quality electrophoresis and blotting results. This compact unit allows for both protein separation and electro transfer, making it an ideal choice for labs needing efficient and reliable equipment. The SE300 miniVE features passive cooling to ensure straight lanes and sharp bands, while using minimal buffer for quick, precise outcomes. Users can cast their own gels or opt for a range of compatible precast gels from various manufacturers, adding to its flexibility. With the optional SE302 Blot Modules, this unit can transfer up to four gels in just 45 minutes using only 300 ml of buffer, enhancing both efficiency and resource conservation. The complete unit includes essential components such as a lower buffer chamber, gel modules with gaskets, glass plates, combs, T-spacers, and more. Built for durability and ease of use, the SE300 miniVE ensures that researchers can achieve consistent, high-resolution results, making it a dependable asset for any laboratory focused on protein analysis. Please note: 1.0mm T-Spacers are included with purchase. Additional T-Spacers are available for purchase separately. INCLUDED: The Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis and Blotting Complete Unit includes: - Lower Buffer Chamber (tank) - Gel Modules with Gaskets, 2 assemblies - Safety Lid with High Voltage Leads - Glass Plates, Rectangular, 10 x 10.5 cm, 3 pcs - Glass Plates, Notched, 10 x 10.5 cm, 3 pcs - Combs, 10-well, 1.0 mm thick, 2 pcs - T-Spacers, 1.0 mm thick, 4 pcs - Well-Locating Decals, 2 pcs - Wonder Wedge Plate Separation Tool - Gel Seal - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The Invitrogen Novex XCell II Mini-Cell EL9001 Electrophoresis Cuvette is a compact and efficient to (more)ol for separating proteins and nucleic acids. With dimensions of 14.5 cm x 14 cm x 11 cm, and a capacity of 200 mL for the blot module and 600 mL for the buffer chamber, it is ideal for laboratory work that requires processing small samples. Its maximum blot size is 9 cm x 9 cm. Designed to facilitate the electrophoresis of proteins and DNA in acrylamide and agarose gels, as well as for the transfer of proteins to membranes, it is perfect for both research applications and educational purposes, standing out for its ease of use and precision. Maximize the precision of your experiments with the Novex XCell II Mini Cell Electrophoresis Cell El9001, available at Galileo Equipment. Ideal for applications in protein and nucleic acid separation, this compact cell offers exceptional performance in gel electrophoresis. Its innovative design ensures uniform distribution of the electric field and reproducible results. With ease of use and maintenance, it is perfect for research and teaching laboratories. Optimize your biomolecular analysis with the Novex XCell II and discover our exclusive offers to equip your laboratory with the best technology!

2 GC 3800 Gas Chromatographs for VARIAN parts Without Software Without a computer For parts

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Outside dimensions (h x w x d): 2000mm x x765mm x 800mm Inside dimensions (h x w x d): 1445mm x 620m (more)m x 670mm Capasity: 599 L Weight: 140kg 230V / 50Hz / 600W

Scientific Industries Incubator-Genie SI-1403 Shaking Incubator This was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in good working order, but may need slight calibration. (Digital thermometer used for testing, not included). It is in good cosmetic condition with minor marks.

Labconco FilterMate Portable Exhauster, 2 Carbon Filters required (not included) Compact, corros (more)ion-resistant housing of glacier white and light gray, dry powder, epoxy-coated steel with rubber feet Uses HEPA filter, carbon-based filter or combination of both filters Variable speed, non-sparking motorized impeller, adjustable to optimize airflows Negative pressure plenum surrounds positive pressure impeller to capture and refilter unfiltered air Front-mounted rocker switch controls power to blower Rear-mounted auxiliary electrical outlet for connection to airflow monitor Suitable for 2 ft., 3 ft. and 4 ft. wide x 22.75 in. high enclosures Comes with IEC 3-wire electrical cord with plug Models for use with HEPA filter Include true bag-in bag-out filter disposal system for safely removing and replacing filter without detaching hose Filter efficiency: 250 CFM INCLUDED: The Labconco 3970004 FilterMate Portable Exhauster, 2 Carbon Filters required (not included), 115V, 60Hz includes: - 8 Feet of 5" ID Gray Hosing - Two Clamps - 5" OD Upper Transition Adapter - Xpert Balance Enclosure - Protector XVS Ventilation Station - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty