Hoefer HE33B Mini Horizontal Agarose Electrophoresis Unit

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This system is used to analyze the size of DNA/RNA samples, with convenientanalytical operability. I (more)t achieves analysis costs on par with agarose gel electrophoresis, and can perform fully automatic analyses of up to 108 samples. Using optimized reagent kits (four types for DNA analysis and one type for RNA analysis), the system achieves a high resolution and high sensitivity. It can significantly improve the workflow for mutation checks in genome editing, and genotype determination. Sample rack: Compatible with 96-well PCR plate and 12/8-strip PCR tube (Shimadzu recommended product) Microchip: Quartz, 23 mm separation channel length, on-chip electrodes (insert up to four microchips) Pretreatment: Automatic sample injection, automatic separation buffer replenishing, automatic chip cleaning Electrophoresis Voltage: Max. rated voltage: 1.5 kV, max. current: 250 μA Analysis Cycle time: Approx. 80 s (using four chips) DNA standard analysis (DNA-1000/premixed). This does not include time required for carrying out the first and final wash and initial analysis. Detection Method: LED-excited fluorescence detector (470 nm excitation wavelength) Separation Size Range: 25 to 500 bp (DNA-500 Kit), 100 to 1000 bp (DNA-1000 Kit), 100 to 2500 bp (DNA-2500 Kit), 100 to 12000 bp (DNA-12000 Kit), Up to 28S rRNA (5.0 knt) (RNA Kit) Resolution: 5 bp (25 to100 bp), 5% (100 to 500 bp), 10% (500 to 1000 bp), 20% (1000 to 12000 bp) Sizing Accuracy: ±5 bp (25 to 100 bp), ±5% (100 to 500 bp), ±15% (DNA-1000, DNA-2500, DNA-12000) Required Sample Volume: DNA analysis: Premix mode: 2 to 10 μL (after mixing with marker solution: 6 to 30 μL), On-Chip Mixing mode: 5 to 30 μL, RNA analysis: Premix mode: 3 to 15 μL (after mixing with marker solution: 6 to 30 μL), In the Premix mode, the marker solution is mixed with the sample before loading in the instrument, In the On-Chip Mixing mode, the sample and marker solution are loaded separately and mixed on the microchip under program control. Maximum Salt Concentration: DNA analysis: 10mM Tris-HCI containing 125 mM KCl or NaCl max, RNA analysis: 10mM Tris-HCI, containing 1 mM EDTA max. Min. Detection Limit: DNA analysis: 0.2 ng/μL (at 10mM Tris-HCI buffer, containing 50 mM KCl and 1.5 mM MgCl2), RNA analysis: 5 ng/μL (total RNA), 25 ng/μL (mRNA) (at 10 mM Tris-HCI buffer, containing 1mM EDTA) Quantitation Range: DNA analysis: 0.5 to 50 ng/μL (at 10mM Tris-HCI, containing 50 mM KCl and 1.5 mM MgCl2), RNA analysis: 25 to 500 ng/μL (total RNA), 25 to 250 ng/μL (mRNA) (10 mM Tris-HCI buffer, containing 1 mM EDTA) Quantitation Accuracy: DNA analysis: ±30% (at 10 mM Tris-HCI buffer, containing 50 mM KCL) (DNA-500, DNA-1000, and DNA-2500 Kits), ±40 % (DNA-12000 kit. Quantitative accuracy is based on verification from 200 bp to 12000 bp.) Quantitation Repeatability: RNA analysis: CV 10% or less (CV 20% or less for eukaryotic-origin total RNA at concentrations of 150 ng/μL or more) Dimensions (WxDxH): 415 x 545 x 508 mm Weight: 43 kg

The redesigned Sub-Cell GT Electrophoresis Cell offers updated features that make electrophoresis ev (more)en easier. The Sub-Cell GT Cell is the most versatile submerged horizontal electrophoresis cell in the Sub-Cell family. Because the Sub-Cell GT cell offers the greatest choice of gel lengths, sample combs, and separation modes, it is ideal for Southern and northern blotting protocols. Up to 30 samples can be resolved over a distance of 25 cm. Using four rows of combs, the cell will run up to 120 analytical samples. Cell size (WxLxH): 18 x 40.5 x 9.4 cm Gel tray sizes (OD) (WxL): 15 x 20 cm ReadyAgarose gels accommodated: No Sample throughput: 1–120 Base buffer volume: ~1 L Buffer recirculation: No Bromophenol blue migration: ~3.0 cm/hr (at 75 V) Weight: 1 kg

The redesigned wide Mini-Sub Cell GT Electrophoresis Cell offers updated features that make electrop (more)horesis even easier. The wide Mini-Sub Cell GT Cell is suited for multiple-sample, rapid-screening applications. This popular system has a wide platform that can separate 30 samples per comb. The wide Mini-Sub Cell GT Cell is the same width as the Sub-Cell GT Cell, so the comb holder, combs, and 15 x 10 cm gel trays are interchangeable with the larger Sub-Cell GT units. Cell size (WxLxH): 178 x 255 x 68 mm Gel tray sizes (OD) (WxL): 150 x 70 mm Ready Agarose gels accommodated: Yes, wide mini and 96 Plus formats Sample throughput: 10 – 60 Base buffer volume: ~650 ml Buffer recirculation: No Bromophenol blue migration: ~45 mm/hr (at 75 V) Weight: 1 kg

Hoefer SE410 Tall Air-Cooled Vertical Protein Electrophoresis Basic Unit Compatible Glass Plate Siz (more)es (W x H) 18 x 24 cm Maximum Power Settings 500 V, 60 mA, 20 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 18 x 24 cm - Rugged injection molded construction is durable and assembles easily - Run two gels with the addition of a divider plate - Built-in casting stand seals leak free - Choose from a wide variety of accessories - Plates, clamps, spacers, and combs are interchangeable with the SE600 Series The Hoefer SE410 Tall Air-Cooled Vertical Protein Electrophoresis Basic Unit is a durable and economical choice, specifically designed for educational labs with multiple users. Constructed with rugged injection-molded materials, this compact unit offers long-lasting performance and easy assembly, making it ideal for consistent use in busy lab environments. Accommodating glass plates up to 18 x 24 cm, the SE410 provides ample space for precise protein analysis, with the option to run two gels simultaneously using an additional divider plate. The SE410's built-in casting stand ensures a leak-free seal, streamlining the setup process and enhancing ease of use. For added versatility, its plates, clamps, spacers, and combs are interchangeable with the SE600 Series, allowing labs to expand and tailor their electrophoresis setups as needed. Operating smoothly within standard lab conditions, this unit handles temperatures up to 45°C and humidity up to 80%, with power settings reaching 500 V, 60 mA, and 20 W—delivering reliable performance across a range of applications. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Upper Buffer Chamber - Safety Lid with Electrodes - Glass Plates, 18 x 24 cm, 2 pcs - Clamp Assemblies, 8 cm, 2 pcs - Clamp Assemblies, 16 cm, 2 pcs - Cams, 2 pcs - Slotted Gasket for Upper Buffer Chamber - Bubble Level - Laminated Gasket for Casting Stand - Spacer-Mate Alignment Template - Wonder Wedge-Plate Separation Tool - Gel Seal - Comb, 15-well, 1.5 mm thick - Spacers, 1.5 mm thick, 2 cm wide, 2 pcs INCLUDED: The Hoefer SE410 Tall Air-Cooled Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Upper Buffer Chamber - Safety Lid with Electrodes - Glass Plates, 18 x 24 cm, 2 pcs - Clamp Assemblies, 8 cm, 2 pcs - Clamp Assemblies, 16 cm, 2 pcs - Cams, 2 pcs - Slotted Gasket for Upper Buffer Chamber - Bubble Level - Laminated Gasket for Casting Stand - Wonder Wedge-Plate Separation Tool - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis and Blotting Complete Unit Glass Pla (more)te Size (W x H) 10 x 10.5 cm or 10 x 8 cm Maximum Power Settings 1000 V, 500 mA, 50 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Quick, excellent results using minimal buffer - Passive cooling produces gels with straight lanes and sharp bands - Cast your own or use precast gels from a variety of manufacturers - Transfer up to 4 gels in 45 minutes with only 300 ml buffer using optional SE302 Blot Modules - Designed for use with a wide variety of precast gels The Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis and Blotting Complete Unit is a versatile and robust system designed to deliver high-quality electrophoresis and blotting results. This compact unit allows for both protein separation and electro transfer, making it an ideal choice for labs needing efficient and reliable equipment. The SE300 miniVE features passive cooling to ensure straight lanes and sharp bands, while using minimal buffer for quick, precise outcomes. Users can cast their own gels or opt for a range of compatible precast gels from various manufacturers, adding to its flexibility. With the optional SE302 Blot Modules, this unit can transfer up to four gels in just 45 minutes using only 300 ml of buffer, enhancing both efficiency and resource conservation. The complete unit includes essential components such as a lower buffer chamber, gel modules with gaskets, glass plates, combs, T-spacers, and more. Built for durability and ease of use, the SE300 miniVE ensures that researchers can achieve consistent, high-resolution results, making it a dependable asset for any laboratory focused on protein analysis. Please note: 1.0mm T-Spacers are included with purchase. Additional T-Spacers are available for purchase separately. INCLUDED: The Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis and Blotting Complete Unit includes: - Lower Buffer Chamber (tank) - Gel Modules with Gaskets, 2 assemblies - Safety Lid with High Voltage Leads - Glass Plates, Rectangular, 10 x 10.5 cm, 3 pcs - Glass Plates, Notched, 10 x 10.5 cm, 3 pcs - Combs, 10-well, 1.0 mm thick, 2 pcs - T-Spacers, 1.0 mm thick, 4 pcs - Well-Locating Decals, 2 pcs - Wonder Wedge Plate Separation Tool - Gel Seal - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W Dimensions (WxDxH): 210 x 245 x 65 mm Weight: 1.1 kg

The EASYSOFT SXT2 consists of a plastic softener tank with internal water distributors. In the integ (more)rated salt storage vessel, brine is automatically prepared for the resin regenerations. Furthermore, the EASYSOFT SXT2 is equipped with an integrated double 3-way bypass valve for decommissioning the water softener while preserving the water supply. On the SXT2 version of this model, a fully automatic control valve (with built-in microprocessor) is mounted on the tank. This ensures the regeneration of the resin. The EASYSOFT SXT2 is also equipped with a mixing device integrated in the control valve to set a residual hardness. The regeneration of this microprocessor controlled water softener can be done in three ways: volume, time and a combination of the two. Capacity: 450 l/h Period capacity (at 10 °dH) min/max: 2.0/3.4 m3 Salt consumption per complete regeneration min/max: 0.7/2.2 kg Resin content per tank: 9 l Salt container content: 25 kg Required water pressure min/max: 2.0/7.0 bar Dimensions (WxDxH): 262 x 463 x 640 mm

Direct ISE and pH readout Simultaneous data/temperature display Stability display Selectable resolut (more)ion Absolute and relative mV modes Adjustable isopotential point pH autocalibration; calibrate at up to five pH/ISE points Auto blank correction Manual or automatic temperature compensation with optional probe Self-diagnostics and user prompts Choice of printout options at ready, at timed intervals, or on demand Memory storage for calibration and data points Two-way RS-232-C port Autobuffer recognition and 25-point datalogging including time/date of last calibration Selectable to 0.1, 0.01 or 0.001pH Relative mV range: 0 to ±1999.9mV

F1 Mass Standard - knob weights with adjustment chamber - set (1 mg - 500 g), plastic box Number of  (more)pieces in the set: 24 Weights 1 g i 2 g – solid masses without adjusting chamber