Accuris E1101 myGel Mini Electrophoresis System

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The power source of the brand Pharmacia type MultiDrive XL is designed for use in combination with e (more)lectrophoresis and isoelectric focusing (IEF). This power source can control and supply the three electrical parameters voltage, current and power. The duration of the run can be controlled by setting values for the following parameters: time, voltage and milliamperes per hour. In addition, the Pharmacia MultiDrive XL contains nine pre-programmed methods. Specifications Voltage: 3500V Current: 400mA Power: 150W Dimensions (WxDxH): 365 x 300 x 160 mm

INGENYphorU IPU-S Vertical Electrophoresis System This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and is in good cosmetic condition with marks from use. The unit is watertight and the valve is working. Also included: FisherBrand HU13 FisherBrand HU6 INGENY phorLI Deca Probe Series Invitrogen Novex Mini-Cell

Hoefer SE900 Large Format Vertical Protein Gel Electrophoresis Basic Unit Compatible Glass Plate Si (more)zes (W x H) 28 x 21 cm Gel Size 25 x 20 cm Maximum Power Settings 600 V, 1000 mA, 150 W Features - No upper buffer chamber—no gasket issues and no risk of buffer loss - Utilizes minimal parts—easy to use and reliable - External cooling and internal buffer circulation—ensures an even,constant, and uniform temperature for reproducible results - Up to six 28 cm plates can be run at one time—perfect for high throughput applications - Glass plate sandwiches are hinged cassettes—allows for rapid and easy assembly before use - Built-in draining port—avoids lifting of a heavy buffer-filled tank - Assembly of the tank is easy—no clamps needed Innovative design enables re-use of tank buffer - Innovative design enables re-use of tank buffer—decreased buffer consumption for reduced cost The Hoefer SE900 Large Format Vertical Protein Gel Electrophoresis Basic Unit is a specialized, high-capacity system designed for second-dimension electrophoretic separation. Ideal for high-throughput applications, this unit can accommodate up to six 28 cm SDS-PAGE gels at once, making it perfect for labs that need reliable, large-scale protein analysis. Its adaptable design also accommodates similar-sized plates from other manufacturers, offering flexibility for various lab setups. Built for precision, the SE900 features external cooling and internal buffer circulation to maintain a constant and uniform temperature, ensuring reproducible results with each run. This unit’s innovative design minimizes maintenance with no upper buffer chamber, eliminating gasket issues and buffer loss risk. It’s engineered for ease of use, with hinged glass plate cassettes for quick assembly and a built-in draining port to avoid lifting a heavy buffer-filled tank. Simplified with minimal parts, this electrophoresis system is easy to assemble and maintain. Operating smoothly within standard lab conditions, the SE900 can handle temperatures up to 45°C and humidity up to 80%, with power settings reaching up to 600 V, 1000 mA, and 150 W. Please note, the dropdown menu allows selection of a complete package, which includes: - Separation Tank - Tubing Kit - Lid with High Voltage Leads - Multiple Gel Caster - Internal PAGE Rack - Hinged Glass Cassettes-6 pcs INCLUDED: The Hoefer SE900 Large Format Vertical Protein Gel Electrophoresis Basic Unit includes: - Separation Tank - Tubing Kit - Lid with High Voltage Leads - Internal PAGE Rack - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hoefer HE99X Max Horizontal Agarose Electrophoresis Unit Gel Dimensions (W x L) 15 x 20 cm, 15 x 15  (more)cm, or 15 x 10 cm Maximum Power Settings 200 V, 100 mA, 20 W Maximum Buffer Volume 1.2 L Features - Self-locating/centering guides—supports consistent running tray placement - Gel anchor feet—prevent the gel from floating or sliding during the run - Variety of comb sizes—enables customization of sample throughput to fit your laboratory's requirements - Adjustable comb height—complete control over well depth - Three casting kits available—enabling users to run 15 x 20,15 x 15, or 15 x 10 cm gels in the same unit The Hoefer HE99X Max Horizontal Agarose Electrophoresis Unit is designed for superior nucleic acid fragment separation, accommodating sizes from 100 bp to 20 kbp. This versatile unit includes three interchangeable tray sizes (15 x 20 cm, 15 x 15 cm, and 15 x 10 cm), ensuring adaptability for various gel sizes. It features self-locating/centering guides for consistent tray placement and gel anchor feet to prevent the gel from moving during runs. The unit offers a range of comb sizes for tailored sample throughput and adjustable comb heights for precise well depth control. With a maximum buffer volume of 1.2 liters and power settings of 200 V, 100 mA, and 20 W, it can handle up to 60 samples simultaneously. The HE99X operates efficiently within a temperature range of 4 to 40°C and up to 80% humidity. Overall dimensions are 14.17 x 5.51 x 7.17 inches (36 x 14 x 18.2 cm), making it a compact and efficient choice for high-resolution electrophoresis. Please note, the dropdown menu allows selection of a complete package, which includes: - Buffer Chamber Assembly - Safety Lid with High Voltage Leads - Running Tray, 15 x 20 cm - Casting Tray, 15 x 20 cm - Foam Gaskets, 4 pcs - Bubble Level - 1.5 mm thick, 15-well comb - Comb Back - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

System contains: Solvent tray Vacuum degasser Binary pump Autosampler Thermostatted colomn compartme (more)nt Variable wavelength detector Vacuum degasser: The Agilent 1100 HPLC Degasser features a 4-channel vacuum container, including four tubular plastic membranes, and a vacuum pump. This degasser has a maximum flow rate of 0-10ml/min flow rate per channel and 5-10ml/min at reduced degassing performance. Binary pump: Flow Precision: <0.3 % RSD (typically <0.15 % RSD) Flow Range: Setpoints from 0.001 to 5.0 ml/min,  in 0.001 ml/min increments Operating range: 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) Pulsation: <2 % amplitude (typically <1 %) at 1 ml/min isopropanol at all pressures >1 MPa (> 10 bar, >147 psi) Compressibility compensation: User selectable, based on mobile phase compressibility Delay volume: 180 – 480 µl (600-900 µl with mixer) dependent on back pressure Recommended pH range: 1.0 – 12.5. Solvents with pH <2.3 should not contain acids which attack steel Well-plate autosampler: Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display Injection range: 0.01 – 8 µl in 0.01 µl increments Precision: Typically < 0.5 % RSD of peak areas from 5 – 40 µl, Typically < 1 % RSD from 1 – 5 µl, Typically < 3 % RSD from 0.2 – 1 µl Sample viscosity range: 0.2 – 5 cp Sample capacity: 2 × well-plates (MTP) + 10 × 2 ml vials, 100 x 2 ml in one tray, 40 x 2 ml in half tray Injection cycle time: Typically < 30 s using following standard conditions: Default draw speed: 4 µl/min, Default eject speed: 10 µl/min, Injection volume: 0.1 µl Carry-over: Typically < 0.05 % using the following conditions: Column: 150 x 0.5 mm Hypersil ODS, 3 µm Mobile phase: Water/Acetonitrile = 85/15 Column Flow rate: 13 µl/min Injection volume: 1 µl caffeine (=25ng caffeine), 1 µl water to test carryover. Outside wash of needle before injection: 20 sec with water using flush port Thermostatted colomn compartment: Temperature range: 10 degrees below ambient to 80 °C, up to 80 °C: flow rates up to 5 ml/min Temperature stability: ± 0.15 °C Temperature accuracy: ± 0.8 °C (± 0.5 °C With calibration) Column capacity: Three 30 cm Warm-up/cool-down time: 5 minutes from ambient to 40 °C, 10 minutes from 40 – 20 °C Dead volume: 3 µl  Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN via other series module Safety and maintenance: Extensive diagnostics, error detection and display (through control module and Agilent ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas. Variable wavelength detector: Detection type: Double beam photometer Light source: Deuterium lamp Wavelength range: 190 – 600 nm Wavelength accuracy: ± 1 nm Bandwidth: 6.5 nm Linearity:> 2AU (5%) upper limit Flow cell standard: 14 µl volume, 10 mm cell path length, 40 bar

High-speed mixer and thermal mixer for small and very small volumes in microplates and reaction tube (more)s The BioShake series allows for highly precise and efficient mixing in the microliter scale for a wide range of applications. Thanks to the adjustable speed of 200 up to 3,000 rpm a vigorous homogenisation even of small volumes is possible and far superior to other mixers on the market. The BioShake iQ comes with an very accurate heating technology. This allows highly reproducible results. The temperature range from RT to 99 °C is adjustable in 0.1 °C steps. The temperature accuracy is ±0.1 °C, the temperature uniformity through all samples is better than ±1 °C.

CY10 scale&rsquo;s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance&rsquo;s memory &ndash; either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Heidolph Hei-VAP Expert HL/G5 Non Coated Hand Lift w/ G5 Dry Ice CondenserFeatures - Rotation speed  (more)range of 10 to 280 RPM - Heating bath temperature range of 20°C to 210°C - Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm - Multilingual menu and text display for error messages - Integrated solvent library to facilitate adjustment of the required vacuum on an external vacuum controller - Smart functions include timer and maximum temperature limitation - Optional display of vapor temperature - Highly resistant PTFE vacuum seals achieve maximum tightness and reduce expensive spare parts - Available in hand lift or motor lift models - USB and Micro SD interfaces featured 5" touch screen display with clear display of all values, featuring basic and advanced views, along with additional smart functions Separate knobs for rotation and heating with locking function to prevent accidental adjustments, along with LED ring lights Safety heating bath with overheat and dry run protection, featuring ergonomic handles for easy removal/disposal of contents The Hei-VAP Series of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. Precise setting of rotation speed and heating bath temperature on the digital touch display or – for quick access during an active process – directly via the knobs on the operating panel. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Expert HL/G5 Non Coated Hand Lift w/ G5 Dry Ice Condenser includes: - Heating Bath - Control Panel - G5 Dry Ice Condenser - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Benchmark myBlock I Dry Bath, Single PositionBenchmark’s myBlock series is a “next generation” produ (more)ct line that introduces several major advantages over traditional dry baths. They are the first digital dry baths to include advanced microprocessor controls, timed or continuous operation and a removable hinged lid. In addition, an optional external temperature feedback probe can be positioned directly inside a sample tube, providing real-time control and monitoring of actual sample temperature.The myBlock’s transparent lid helps to promote better uniformity and minimize temperature stratification in the block by maintaining a warm air jacket layer. It also helps to reduce energy consumption by minimizing heat loss to the environment. The hinged lid can be flipped open (to the rear), or easily removed (lifted off) to Both the single and dual block models can be ordered in a configuration that includes our unique Quick-Flip™ blocks. These universal blocks accept tubes from 0.5 to 2.0ml and, with just a quick flip to the other side, accomodate 0.2ml tubes, PCR strips or (in the dual block model only) a PCR plate. Other blocks are available for tubes up to 50ml. *Block Sold separately* Click Here to View Product Video INCLUDED: The Benchmark myBlock I Dry Bath, Single Position includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty